#http://www.lowpolygon3d.com lwpg Wasa sailboat 2 @ 3D Render Oy, 2006 Tuomo Paavilainen 060721 Sanna Vesen 090807 For more quality object content please visit our site at: http://www.lowpolygon3d.com/index.php?app=ecom&ns=catshow&ref=ArchiCAD

#http://www.lowpolygon3d.com lwpg row-boat 3 @ 3D Render Oy, 2006 Tuomo Paavilainen 060721 Sanna Vesen 090807 For more quality object content please visit our site at: http://www.lowpolygon3d.com/index.php?app=ecom&ns=catshow&ref=ArchiCAD

3D parametric, resolution dependent, Leonard garden standing lamp, with 3 head

3D parametric, Lumos Strahler, Lamp on a rail with 3 spots, with optional\n- spot size\n- spot position\n- spot angle

Door with 2, 3 or 4 sliding leaves and 2 sidelights.

Design: Bønnelycke MDD http://www.bonnelycke.com Forhandler: http://www.schmitz-leuchten.de3D parametric, Scmitz Stage 3, 4 pendant light

ArchiPIPE 1.3 By Paulo H. Santos, arq.º phsantos.arq@clix.pt Jun 2007 Made in S.J.da Madeira/Portugal3D parametric, ArchiPipe 1.3 AC11, pipe, with optional\n- horizontal or vertical position\n- circular or rectangular section\n- pipe slope\n- start and end connection\n- 2D and 3D detail level, Portugal

Door with 2, 3 or 4 sliding leaves, arch top, 2 sidelights and transom.

2D bush on side view.

3D spatial line

Overhead sectional garage door.

2D symbol or wall mounted 3D model.

2D side view contour of a group of people with optional planar 3D.

Interior elevation 2D marker head sign with optional text settings.

#http://www.lowpolygon3d.com lwpg Motor Boat 3 @ 3D Render Oy, 2006 Tuomo Paavilainen 060721 Sanna Vesen 090807 For more quality object content please visit our site at: http://www.lowpolygon3d.com/index.php?app=ecom&ns=catshow&ref=ArchiCAD

2D pine on side view with optional contour only view.

3D parametric, shutter with optional\n- hinges\n- shutter dog

2D side view contour of a sitting woman with optional planar 3D.

2D electric symbol with listing parameters.

2D electric symbol with listing parameters.

2D tree on side view.

2D line-drawing, view dependent truck

2D WC on top, side or front view.

ArchiPIPE 1.3 By Paulo H. Santos, arq.º phsantos.arq@clix.pt Jun 2007 Made in S.J.da Madeira/Portugal3D parametric, ArchiPipe 1.3 AC11, pipe, with optional\n- horizontal or vertical position\n- circular or rectangular section\n- pipe slope\n- start and end connection\n- 2D and 3D detail level

Armchair with 2D symbols and minimal space.

Designer stool with 2D symbols and minimal space.

3D Dimensioning object

3D Dimensioning object

Door with 2, 3 or 4 sliding leaves, arch top, 2 sidelights and transom.

Door with 2, 3 or 4 sliding leaves, arch top, sidelight and transom.

Door with 2, 3 or 4 sliding leaves, arch top, sidelight and transom.

Door with 2, 3 or 4 sliding leaves, arch top and transom.

Door with 2, 3 or 4 sliding leaves, arch top and transom.

3D parametric, Offecct Cab 3 sofa

3D parametric, skylight, Everlite roofing sheet, 3 panel, with optional beams, Hungarian3D parametric, skylight, Everlite roofing sheet, 3 panel, with optional beams, Hungarian

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, bended 3 seat bench

3D Bla Station, bended 3 seat bench

3D Bla Station, bended 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, 3 seat bench

3D Bla Station, bench, 3 seats

3D Bla Station, bench, 3 seats

3D Bla Station, bench, 3 seats

3D Bla Station, bench, 3 seats

3D Bla Station, bench, 3 seats

3D Bla Station, bench, 3 seats

3D Bla Station, bench, 3 seats

3D Bla Station, bench, 3 seats

3D parametric, Kinnarps 4A office furnitures, with\- 3 desks\n- 3 desk chairs\n- visitor chair\n- 4 office cabinets

3D parametric, Kinnarps 4C office furnitures, with\- desk\n- 3 desk chairs\n- 6 office cabinets

Build by : Barrington Arch 2012. All right reserved. Copyright Barrington Architecture & Design Ltd. Designed by Fern U. Name : Miele Wall-mounted Rangehood DA 249-4.gsm Date : Thursday, 3 May 2012 Version : 13.00 Written by ArchiCAD

Door with 2, 3 or 4 sliding leaves.

Door with 2, 3 or 4 sliding leaves.

Door with 2, 3 or 4 sliding leaves, 2 sidelights and transom.

Door with 2, 3 or 4 sliding leaves, 2 sidelights and transom.

Door with 2, 3 or 4 sliding leaves, sidelight and transom.

Door with 2, 3 or 4 sliding leaves, sidelight and transom.

Door with 2, 3 or 4 sliding leaves and 2 sidelights.

Door with 2, 3 or 4 sliding leaves and sidelight.

Door with 2, 3 or 4 sliding leaves and sidelight.

Door with 2, 3 or 4 sliding leaves and transom.

Door with 2, 3 or 4 sliding leaves and transom.

Household wind turbine with 2 or 3 blades. Can be used for animations.

Industrial wind turbine with 2 or 3 blades. Can be used for animations.

3D parametric, yacht 3

The collection of M Sora windows, detail presented, with all shape and color possibilities.

ringhiera a

Bramka piłkarska, kratowa z koszem do koszykówki : Bramka służy do gry w piłkę nożną lub ręczną oraz mini koszykówkę, Konstrukcja bramki wykonana z rury 48,3x2,9 mm i 38x2,6 mm, Siatka bramki wykonana jest z prętów stalowych fi 12 mm i fi 8 mm oraz łańcucha chromowego fi 5 mm, Cała konstrukcja bramki kratowej zabezpieczona antykorozyjnie, W komplecie znajdują się prefabrykaty betonowe ułatwiające montaż bramki w gruncie. Gateway football, mesh with a basket for basketball: Gateway is used to play football or handball and mini basketball, The design goal is made of pipe 48.3 x2, 9, and 38x2 mm, 6 mm, Grid gateway is made of steel rods fi fi 12 mm and 8 mm and chrome chain Ø 5 mm, The whole structure of the goal mesh corrosion-resistant, The set includes precast concrete goal to facilitate installation in the ground.

Double power socket. UK Standard size, 3 pin. Mk2 - preview image added, 2D view is now power symbol with text

Edited by Michael Wilson Jan '13 AS 2890.1:2004 Figure 4.3

chiusino

Spa Furniture by http://www.3dmediadesign.it/

Biertischgarnitur "Susan" Die Holzelemente dieser edlen Biertischgarnitur wurden aus massiver Eiche gehobelt und mit einem eingefärbten Naturöl behandelt. Sie ergeben einen stilvollen Kontrast zu den Fußgestellen aus schwarz verzinktem Stahl. Die Garnitur besteht aus einem Tisch und zwei Bänken. Mit 3 Tischen und 4 Bänken ergibt sich eine quadratische Anordnung für 16 gesellige Personen. (Material mit Textur Eiche einstellen)

Humko Veggy Wall is a small vertical garden, which can be hengd on the wall. It is available in a different color combination of the panels and frame. It has small integrated water reservoar of 3,5 liters with water pump, microprocesor, humidity sensor and level senzor.

Single Power socket. UK standard, 3 pin. Mk2 - preview image added, 2D view now symbol

Bolt Data Arrays engData - Engineering Bolts 1 - Diameter of Bolt 2 - Pitch of Thread 3 - Width Across Flat of Head and Nut 4 - Width Across Corners 5 - Head Thickness 6 - Nut Thickness coachData - Coach Bolt Data 1 - Size of Bolt 2 - Pitch of Thread 3 - Body Diameter 4 - Head Diameter 5 - Head Thickness 6 - Width Across Flat of Nuts 7 - Width Across Corner of Nuts 8 - Nut Thickness 9 - Thread Length when O/A Lenght <=125mm 10 - Thread Length when O/A Length between 125 and 200mm 11 - Thread Length when O/A Length >200mm screwData - Coach Screw Data 1 - Nominal Size of Screw 2 - Pitch of Thread 3 - Diameter of Screw 4 - Width Across Flat of Head 5 - Width Across Corners 6 - Head Thickness 7 - Root Diameter

Viertelgewendelte Stiege - Winkel kann verändert werden Der Ausgangspunkt ist die Eckstufenachse. Von hier aus wird die Gehlinie aufgeteilt. Die Stiegenbreite und auch der Gehlinenabstand können per editierbarem Hotspot verschoben werden. Der Stiegenanfang kann verschoben werden. Die Position der letzten geraden Stufe vor dem Verzugsbereich kann verschoben werden. Es sind 3 verschiedene Arten des Stufenverzuges eingebaut: Evolvenmethode Kreismethode gleichmäßiges aufteilen Die innere Eckstufenbreite kann nachträglich verändert werden Weiters hinzugefügt: Es ist nun möglich - jedes Stufeneck im Grundriss anzudassen und einfach zu verschieben! Als Konstruktionshilfe dazu habe ich noch hotlines in den berechneten Stufenkanten eingefügt. somit kann man mit den normalen Archicad-Hilfslinien arbeiten, um die Richtung zu halten, wenn man verschiebt! Im 3D wurde bisher nur einfache Trittstufen eingearbeitet. Allerdings ist es hier bereits möglich, den Eckwinkel und die Stiegenhöhe einzustellen - zu ziehen! 19.11.2014 - Geschoß-sensitive Darstellung im 2D: ganze Stiege, bis 1m, bis 1m und drüber strichliert, ab 1m 20.11.2014 - Eckpunkte sind nun verschiebbar, Schatten im drüberliegendem Geschoß hinzugefügt 21.11.2014 - Stufenbeschriftung hinzugefügt - verschiebbar und drehbar. Stufennummern sind nun Mitte Stufe von Gehlinie nach aussen versetzt 24.11.2014: In Grundriss und 3D: Stufenkanten sind nach Innen einzeln parallel verschiebbar (nur Stufenbelag). Laufplatte und Keilstufen hinzugefügt - noch ohne innere parallele Verschiebung Einstellung Materialien von Laufplatte und Belag möglich. Schraffuren bei Innenverschiebungen nachgeführt. Stufenbreiten auf halbe cm gerundet - und in die Berechnung weitergegeben. 25.11.2014 Bug Eckstufe Aussenecke war nicht verschiebbar - gefixt. Laufplatte und Keilstufen laufen nun mit Stufenverschiebungen mit. 26.11.2014 - Anschlußkörper unten - für deckenanschluß mit Hotspot - Polygon gelöst - Im Schnitt sichtbar. Materialien im 3D für Schnittdarstellung mit Schraffuren versehen 27.11.2014 Anschlußkörper für oberen Deckenanschluss hinzugefügt 28.11.2014 Anschlüsse oben und unten drehen sich nun mit den Antrittstufen mit, wenn sie geändert werden. einige Schraffur - Bugs geändert. 30.11.2014 Zusatz-Punkte für Wangen mit aufgesattelten Trittstufen hinzugefügt - inkl unterer und oberer Anschluss Aussen und Innenwangen hergestellt. Zusätzlich ein Text hinzugefügt, dass dies ein Demo-Objekt ist. Dies lässt sich durch Eingabe eines Codes deaktivieren 2.12.2014: Wangenstiegen: unterer Deckenanschlüsse neu konzipiert. untere Antrittsstufe - im 2D sichtbar falls gewünscht. Weitere SOE-Befehle bei Wangen: Sichtbarkeit der Stufenbeläge durch die Wangenaussenseite ein und ausschaltbar 8.12.2014: Tritt und Setzstufen sind nun für die meisten Konstruktionsarten verfügbar. 10.12.2014: Trittstufen vorne abgebogen - hinten aufgebogen - sind nun aufgesattelt, freitragend, auf Mittelwange und zwischen Wangen verfügbar. 12.12.2014: Eigenes Material Setzstufen, Mörtelbett Trittstufe hinzufügen 14.12.2014: Seitlicher Überstand Trittstufenbelag, Graphische Art -Abfrage nun Integer-Bezogen ohne Fehlermeldung. Einschaltbare Wangenabwicklung für nackte Stahlbetonstiege mit kompletter Bemassung von Eckstufe und Gehlinie aus. 18.12.2014 Anti-Rutschleisten (gelbe Streifen) hinzugefügt. 20.12.2014 Maskwerte der tragenden Groups geändert, Keilstufen bei Seiten- Wangen zur Gesamtgruppe hinzugefügt, Sockelleisten hinzugefügt. Texturen der Tritt und Setzstufen an der Gehlinie und dem jeweiligen Stufenwinkel ausgerichtet.

Alfa Romeo Brera 3.2 JTS V6 2008. Change surfaces and view attributes. The car can be rotated to fit the contour of the site.

An iPad 3 - drawn to full detail with buttons & ports

simple logwall with sealing - "tongue and groove" Features: 1. free movable 2d-view with movable hotspots - switchable 2. its possible to draw every single position of any tree-trunk at wall-beginning. 3. in ground-view there is a userinterface to switch tho ofte used settings 4. a polygon to cut contours - switchabele and free placeable 5. 10 free mavable rectangular cutouts - to place windows or else 6. sealing tongue and groove begin at wall crossingpoint 8. switch on simple measurements 9. begin with halften block or full in z-direction 10. implanted inaccuracy to get more reality in 3d-representation

Palm Tree v1.3

Viertelgewendelte Stiege - Winkel kann verändert werden Der Ausgangspunkt ist die Eckstufenachse. Von hier aus wird die Gehlinie aufgeteilt. Die Stiegenbreite und auch der Gehlinenabstand können per editierbarem Hotspot verschoben werden. Der Stiegenanfang kann verschoben werden. Die Position der letzten geraden Stufe vor dem Verzugsbereich kann verschoben werden. Es sind 3 verschiedene Arten des Stufenverzuges eingebaut: Evolvenmethode Kreismethode gleichmäßiges aufteilen Die innere Eckstufenbreite kann nachträglich verändert werden Weiters hinzugefügt: Es ist nun möglich - jedes Stufeneck im Grundriss anzudassen und einfach zu verschieben! Als Konstruktionshilfe dazu habe ich noch hotlines in den berechneten Stufenkanten eingefügt. somit kann man mit den normalen Archicad-Hilfslinien arbeiten, um die Richtung zu halten, wenn man verschiebt! Im 3D wurde bisher nur einfache Trittstufen eingearbeitet. Allerdings ist es hier bereits möglich, den Eckwinkel und die Stiegenhöhe einzustellen - zu ziehen! 19.11.2014 - Geschoß-sensitive Darstellung im 2D: ganze Stiege, bis 1m, bis 1m und drüber strichliert, ab 1m 20.11.2014 - Eckpunkte sind nun verschiebbar, Schatten im drüberliegendem Geschoß hinzugefügt 21.11.2014 - Stufenbeschriftung hinzugefügt - verschiebbar und drehbar. Stufennummern sind nun Mitte Stufe von Gehlinie nach aussen versetzt 24.11.2014: In Grundriss und 3D: Stufenkanten sind nach Innen einzeln parallel verschiebbar (nur Stufenbelag). Laufplatte und Keilstufen hinzugefügt - noch ohne innere parallele Verschiebung Einstellung Materialien von Laufplatte und Belag möglich. Schraffuren bei Innenverschiebungen nachgeführt. Stufenbreiten auf halbe cm gerundet - und in die Berechnung weitergegeben. 25.11.2014 Bug Eckstufe Aussenecke war nicht verschiebbar - gefixt. Laufplatte und Keilstufen laufen nun mit Stufenverschiebungen mit. 26.11.2014 - Anschlußkörper unten - für deckenanschluß mit Hotspot - Polygon gelöst - Im Schnitt sichtbar. Materialien im 3D für Schnittdarstellung mit Schraffuren versehen 27.11.2014 Anschlußkörper für oberen Deckenanschluss hinzugefügt 28.11.2014 Anschlüsse oben und unten drehen sich nun mit den Antrittstufen mit, wenn sie geändert werden. einige Schraffur - Bugs geändert. 30.11.2014 Zusatz-Punkte für Wangen mit aufgesattelten Trittstufen hinzugefügt - inkl unterer und oberer Anschluss Aussen und Innenwangen hergestellt. Zusätzlich ein Text hinzugefügt, dass dies ein Demo-Objekt ist. Dies lässt sich durch Eingabe eines Codes deaktivieren 2.12.2014: Wangenstiegen: unterer Deckenanschlüsse neu konzipiert. untere Antrittsstufe - im 2D sichtbar falls gewünscht. Weitere SOE-Befehle bei Wangen: Sichtbarkeit der Stufenbeläge durch die Wangenaussenseite ein und ausschaltbar 8.12.2014: Tritt und Setzstufen sind nun für die meisten Konstruktionsarten verfügbar. 9.12.2014: Hotspot-Bug entfernt zum Durchschalten der Konstruktionsarten, Gebogene Blechstufen hinzugefügt - Nur stufen, Eingeschweisst zwischen Wangen, Aufgesattelt auf Rand unf Mittelwangen

Ceiling fan with three blades.

Escalera de Placa de acero de 1/2 pulgada para proyecto cuautemoc

The collection of M Sora windows, detail presented, with all shape and color possibilities.

Einfache Blockbau-Wand mit cones als Block - übergreifend mit Fugen-Abdichtungs-Feder. Features: 1. Zuschaltbare 2D-Ansicht in Grundreiisdarstellung - frei verschiebbar. 2. Die einzelnen Vorköpfe sind im 3D und in der optional zuschaltbaren 2D-Ansicht verschiebbar 3. Im Grundriss mittig gibt es ein Hotspot-schaltbares Interface mit den wichtigsten Parametern 4. Es gibt ein frei verschiebliches 6-seitiges Polygon zum Wegschnitt von Kontouren 5. Es gibt 10 frei verschiebbare Durchbrüche - zB. für Fenster 6. Die Abdichtungs-Federn sind zuschaltbar und beginnen erst am Kreuzungspunkt. 8. Zuschaltbare Bemassung in Grundriss und Ansicht 9. Höhenverschiebung des untersten Blockes um die Hälfte möglich 10. Zur realitätsnaheren Darstellung wurde bei den Vorköpfen und bei den Übergriffen zur Stapelung eine Ungenauigkeit eingebaut.

MKN 0521702, Salamander Size 1, electric, 800mm, chrome nickel steel construction, 5 height levels, radiating heating elements, grill grid with handles, power regulator, chrome nickel steel construction, 3.3kw, 230v/50/1 NPE AC, 16amp earthed plug

Viertelgewendelte Stiege - Winkel kann verändert werden Der Ausgangspunkt ist die Eckstufenachse. Von hier aus wird die Gehlinie aufgeteilt. Die Stiegenbreite und auch der Gehlinenabstand können per editierbarem Hotspot verschoben werden. Der Stiegenanfang kann verschoben werden. Die Position der letzten geraden Stufe vor dem Verzugsbereich kann verschoben werden. Es sind 3 verschiedene Arten des Stufenverzuges eingebaut: Evolvenmethode Kreismethode gleichmäßiges aufteilen Die innere Eckstufenbreite kann nachträglich verändert werden Weiters hinzugefügt: Es ist nun möglich - jedes Stufeneck im Grundriss anzudassen und einfach zu verschieben! Als Konstruktionshilfe dazu habe ich noch hotlines in den berechneten Stufenkanten eingefügt. somit kann man mit den normalen Archicad-Hilfslinien arbeiten, um die Richtung zu halten, wenn man verschiebt! Im 3D wurde bisher nur einfache Trittstufen eingearbeitet. Allerdings ist es hier bereits möglich, den Eckwinkel und die Stiegenhöhe einzustellen - zu ziehen! 19.11.2014 - Geschoß-sensitive Darstellung im 2D: ganze Stiege, bis 1m, bis 1m und drüber strichliert, ab 1m 20.11.2014 - Eckpunkte sind nun verschiebbar, Schatten im drüberliegendem Geschoß hinzugefügt 21.11.2014 - Stufenbeschriftung hinzugefügt - verschiebbar und drehbar. Stufennummern sind nun Mitte Stufe von Gehlinie nach aussen versetzt 24.11.2014: In Grundriss und 3D: Stufenkanten sind nach Innen einzeln parallel verschiebbar (nur Stufenbelag). Laufplatte und Keilstufen hinzugefügt - noch ohne innere parallele Verschiebung Einstellung Materialien von Laufplatte und Belag möglich. Schraffuren bei Innenverschiebungen nachgeführt. Stufenbreiten auf halbe cm gerundet - und in die Berechnung weitergegeben. 25.11.2014 Bug Eckstufe Aussenecke war nicht verschiebbar - gefixt. Laufplatte und Keilstufen laufen nun mit Stufenverschiebungen mit. 26.11.2014 - Anschlußkörper unten - für deckenanschluß mit Hotspot - Polygon gelöst - Im Schnitt sichtbar. Materialien im 3D für Schnittdarstellung mit Schraffuren versehen 27.11.2014 Anschlußkörper für oberen Deckenanschluss hinzugefügt 28.11.2014 Anschlüsse oben und unten drehen sich nun mit den Antrittstufen mit, wenn sie geändert werden. einige Schraffur - Bugs geändert. 30.11.2014 Zusatz-Punkte für Wangen mit aufgesattelten Trittstufen hinzugefügt - inkl unterer und oberer Anschluss Aussen und Innenwangen hergestellt. Zusätzlich ein Text hinzugefügt, dass dies ein Demo-Objekt ist. Dies lässt sich durch Eingabe eines Codes deaktivieren 2.12.2014: Wangenstiegen: unterer Deckenanschlüsse neu konzipiert. untere Antrittsstufe - im 2D sichtbar falls gewünscht. Weitere SOE-Befehle bei Wangen: Sichtbarkeit der Stufenbeläge durch die Wangenaussenseite ein und ausschaltbar 8.12.2014: Tritt und Setzstufen sind nun für die meisten Konstruktionsarten verfügbar. 10.12.2014: Trittstufen vorne abgebogen - hinten aufgebogen - sind nun aufgesattelt, freitragend, auf Mittelwange und zwischen Wangen verfügbar. 12.12.2014: Eigenes Material Setzstufen, Mörtelbett Trittstufe hinzufügen 14.12.2014: Seitlicher Überstand Trittstufenbelag, Graphische Art -Abfrage nun Integer-Bezogen ohne Fehlermeldung. Einschaltbare Wangenabwicklung für nackte Stahlbetonstiege mit kompletter Bemassung von Eckstufe und Gehlinie aus. 18.12.2014 Anti-Rutschleisten (gelbe Streifen) hinzugefügt. 20.12.2014 Maskwerte der tragenden Groups geändert, Keilstufen bei Seiten- Wangen zur Gesamtgruppe hinzugefügt, Sockelleisten hinzugefügt. Texturen der Tritt und Setzstufen an der Gehlinie und dem jeweiligen Stufenwinkel ausgerichtet. 30.3.2015 freigeschaltet

2D sofa 3 seater symbol

A completely parametric object with 3 main trusses. It is part of the 3DMD Aluminum Truss Library, a library of aluminum truss objects. The object is inspired by the brands Milos and Litec, so you can find a similar preset dimensions for each object. You can, however, customize the dimensions of every object to match your favorite brand. The Outline option helps you to simplify the visualization in both 2D and 3D. Download a PDF about this product http://www.3dmediadesign.it/objects/3DMD_Al_Truss_Library.pdf Watch a video about this product http://youtu.be/uC_w124TakU Download a PDF about this product http://www.3dmediadesign.it/objects/3DMD_Al_Truss_Library.pdf Watch a video about this product http://youtu.be/uC_w124TakU

Version 3.04

Industrial wind turbine with 2 or 3 blades. Can be used for animations.

# http://www.eurobib.se Lammhults Biblioteksdesign AB Box 150 SE-221 00 LUND SWEDEN +46 31 18 00 ArchiCAD-object made by: Niklas Dahlman Copyright 2010 niklas.dahlman@eurobib.se +46 31 18 65

#http://www.lammhults.se LAMMHULTS Box 26 Växjövägen 41 SE-360 30 Lammhult Sweden Phone: +46 (0)472 26 95 00 Fax: +46 (0)472 26 05 70 email: info@lammhults.se --- ArchiCAD 12 object made by: Dahlman Design Copyright 2012 www.dahlman-design.se dahlman-design@tele2.se

Overhead sectional garage door.

2D symbol or wall mounted 3D model.

Gewölbe z-Streckbar, x+y - Bogen - Innenbreiten im 2D Streckbar Kreuzgewölbe mit Spiegeln Größenangaben - Innenkontur - Gewölbe wächst nach aussen Nur 1/8tel !

2D side view contour of a group of people with optional planar 3D.

Heizkörper mit horizontalen Röhren. Bearbeitbar mit dem HKLSE-Modeller.

#http://www.lammhults.se LAMMHULTS Box 26 Växjövägen 41 SE-360 30 Lammhult Sweden Phone: +46 (0)472 26 95 00 Fax: +46 (0)472 26 05 70 email: info@lammhults.se --- ArchiCAD 12 object made by: Dahlman Design Copyright 2012 www.dahlman-design.se dahlman-design@tele2.se

2D only.

2D side view contour of a sitting woman with optional planar 3D.

2D electric symbol with listing parameters.

лестница павловск 3

2D electric symbol with listing parameters.

Set Furniture + Wash-basin Smile. Colours/Finishes: 01 White Gloss, 68 Mali Wenge, 73 Bardolino Oak.

[LIST] Revolving doors with 3 leafs The KTV revolving door range is designed for installation in entrance areas where interior environmental control coupled with elegant aesthetics are desired. Available as Manual, Automatic, Positional or Servomatic, the KTV range offers flexibility in design and function. Operation Modes Manual, Automatic, Positional and Servomatic operation Diamater any from 2000 mm to 3400 mm. Standard fixed diameters of 3600 mm and 3800 mm are also available. Floor mounted or ceiling mounted drive units for powered doors Glazed or solid canopy Robust framing or fine frame option Optional: Night shields for additional protection Integrated with DORMA CODIC MasterCard or MATRIX Professional Access Control solutions Certification BS EN 16005 Benefits are flexible design options to meet project specific requirments, DORMA KTV revolving doors effectively reduce noise, dust and dirt as well as greatly contributing to a reduction in building climate control when compared with conventional automatic doors [/LIST]

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

Outdoor relaxation The Garden Easy products are the most generous in size of our furniture range. Optimal comfort and cozy feeling for the most relaxing days of the year. Broberg &amp; Ridderstråle has designed this exclusive lounge series consisting of 3-seating sofa, 2-seating sofa and armchair. Lounge tables are also available in three different sizes. Sofas and armchairs are made in sunbrella fabric to withstand moisture and some rain. The steel is stainless and wooden details are made of teak. We consider the details so you can just take it easy. For the authentic lounge feeling, add our outdoor pillows, Garden Easy Pillow.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

A lower, slimmer version of our existing Vista music and TV furniture. You decide the look of the furniture by choosing drawers, cabinets, and/or shelves. This makes Vista more than just music and TV storage. Vista low is available in two different models – 2 or 3 section. Vista has vents in the back for cable routing. The drawers are deep enough to store video tapes, DVDs and CDs. Solid birch drawer fronts, drawer sides and damping expansion fittings give Vista an exclusive feel. Vista low is available in two lengths and can be obtained with drawers, doors (with hardened, frosted glass) or open shelves. You can also choose between wood legs and/or wheels. Design: Marit Stigsdotter.

Sektionssoffa, fåtölj, bänk. Stomme: Massivträ. Stoppning: Kallskum med fiberfill. Ben: Ek- eller björkben eller medstativ i vit, svart lack eller kromat stål. Fristående och kopplingsbara enheter.

The permanent wall system is strong, simple and flexible. The wall rail is mounted vertically on the wall and have perforated holes all the way for easy height adjustment of the brackets and shelf ends. It is an easy and affordable shelving suitable for storage in the storage and archives. But with a little imagination and creative choices of material the wall rails also can be used where the appearance is high. The collection Wood can be combined as needed. Here is a compressed solution with the vaious shelf types. Choose wood and powder coated colors from our catalog.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

Rover is a collection of mobile storage units which address individual and collective storage needs in the mobile workplace. Available in four sizes. The product is designed to store everything from standard-sized binders, paper and personal items, to laptops and projectors. The taller units can be used as catering carts or projector carts as the top is inset into the wrap-around handle, so that objects cannot slide off when being moved. All units can feature locking wheels and locking aluminium tambour doors which provide full access from all sides. Depending on the configuration. Rover is also available with one or two shelves. Rover is made from white lacquered MDF board RAL 9016. Design: Andrea Ruggiero.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

The basic idea behind Vista is to be able to store TV and music equipment in an attractive, but easily-accessible way. With sufficient depth to make it suitable for most TV models. With vents in the back to allow cables to pass through. Hugely adaptable furniture to meet your needs and requirements. 2- or 3-part? Open shelves, doors or drawers? Legs and/or wheels? Basically, multi-functional, stylish furniture. Vista has vents in the back for cable routing. The drawers are deep enough to store video tapes, DVDs and CDs. Solid birch drawer fronts, drawer sides and damping expansion fittings give Vista an exclusive feel. Vista low is available in two lengths and can be obtained with drawers, doors (with hardened, frosted glass) or open shelves. You can also choose between wood legs and/or wheels. Design: Marit Stigsdotter.

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

Electra is a series of design furniture that, thanks to its attractive design, fits perfectly in every public environment, e.g. lobby or the waiting room. The sofas has high comfort and gives warmth to the rest of the room. Options:Electra is available as: armchair, 2-seat sofa and 3-seat sofa. Also available in the Electra series is a coffee table. Steel details in chrome or silver.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

An energy efficient, space saving, fire and moisture safe external wall construction with ISOVER ULTIMATE and glass wool, suitable for single and multi-family houses. On the outside the ISOVER facade panel 31 provides a comprehensive insulation layer with

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

With Norgips drywall on steel frame profiles, all requirements of lightweight, non-load bearing walls can be achieved. The Db+ wall system is tested both theoretically and practically, and subject to a variety of wall types with well-documented properties

The basic idea behind Minerva was to create a multifunctional shelf for which you contribute to its final shape yourself by selecting the number and size of the modules, shelves, drawers and doors in clear, frosted, white or black tempered glass or in solid birch. All this to get storage as practical and aesthetically appealing as possible. Available natural lacquer, oil or stain. Design: Marit Stigsdotter.

Sovella wallshelving system includes uprights, brackets and steel shelves. The parts are available in powder painted white (-21) and silver effect (-38). Sovella wallshelving system meets the high demands set for storage in public spaces in terms of durability and load capacity. A wide range of wire shelves, pull out baskets, cloth rails and racks as well as perforated panels and hooks are available and compatible with each other. The system includes also a free-standing unit.

Sovella wallshelving system includes uprights, brackets and steel shelves. The parts are available in powder painted white (-21) and silver effect (-38). Sovella wallshelving system meets the high demands set for storage in public spaces in terms of durability and load capacity. A wide range of wire shelves, pull out baskets, cloth rails and racks as well as perforated panels and hooks are available and compatible with each other. The system includes also a free-standing unit.

Sovella wallshelving system includes uprights, brackets and steel shelves. The parts are available in powder painted white (-21) and silver effect (-38). Sovella wallshelving system meets the high demands set for storage in public spaces in terms of durability and load capacity. A wide range of wire shelves, pull out baskets, cloth rails and racks as well as perforated panels and hooks are available and compatible with each other. The system includes also a free-standing unit.

Sovella wallshelving system includes uprights, brackets and steel shelves. The parts are available in powder painted white (-21) and silver effect (-38). Sovella wallshelving system meets the high demands set for storage in public spaces in terms of durability and load capacity. A wide range of wire shelves, pull out baskets, cloth rails and racks as well as perforated panels and hooks are available and compatible with each other. The system includes also a free-standing unit.

The culture is handed down, the knowledge evolves, Friul Mosaic imagines, designs and realizes mosaics carrying out an art ancient and indestructible. The most fascinating works of art adorn the most timeless, priceless homes.

Elegante consolle with 3 useful drawers: practical and elegant wooden consolle, created for every home space, living room or bedroom, entrance or bathroom.

Struttura in metallo trattato con cataforesi e verniciato a polvere nei colori avorio o grafite, puntali in materiale plastico. I cuscini di seduta, di schienale e i braccioli sono in poliuretano indeformabile schiumato a freddo e trattato idrorepellente, sono rimovibili e sono calzati direttamente sulla struttura. Il rivestimento è sfoderabile ed è realizzato nei tessuti per esterno Light, Luz o Rope T. Per garantire maggior comfort, è consigliato l’utilizzo di cuscini di appoggio. Disponibile un winter set di protezione.

3 seater sofa richly padded is one of a range of comfortable luxury sofas, all made by hands and available in a wide range of variants of measures and original fabrics or leathers.

Sideboard 2 doors and three drawers, enriched by elegant reliefs, ideal for those who love the practicality of sliding doors without sacrificing the elegance and sophistication. Made entirely in solid wood, it is available in a wide range of finishes, all customizable

a product of extensive research, the top-of-the-range Case System 2.3 , teams the ever growing demand for ultra sophisticated design with intelligent and innovative technical solutions. To maintain an image of absolute minimalism the handle has been integrated into the doors where it remains invisible. The stainless steel worktop rests on a light, aluminum frame creating a void between base and top. Other elegant technical solutions such as the Blu-motion seal-mechanism that allows the doors of the units to recede softly and silently close are standard. This truly pioneering design introduces the suspended base module, kept in suspension by a built-in L-shaped steel joint. Supported on one side by a low open faced module and fixed to the floor behind a regular base unit on the other the units appear to be weightless. Whilst fulfilling all practical necessities this modular entity contradicts all traditional ideas of a kitchen.

Sidebord with 2 doors and 3 drawers: inside, 2 adjustable shelves. This article, particularly elegant and contemporary in lacquered version, can be personalized by adding decorations on the doors make it more classic, timeless. ideal for the dining room but can be a distinctive and original piece for the living room

Struttura in poliuretano espanso indeformabile a densità differenziate e fibra poliestere con struttura interna in legno . Piedi avvitati alla struttura in polipropilene nero. I cuscini del sedile sono in poliuretano espanso a densità differenziate e fibra poliestere. I cuscini dello schienale sono in piuma d&apos;oca. La collezione ADRIANO è sfoderabile. In pelle è fissa senza gonnellino.

Sideboard with elegant curved 3 doors and 3 drawers with metal runners complete removable: all the beauty and strength of the wood in a product with sinuous lines, contemporary and of great value

a product of extensive research, the top-of-the-range Case System 2.3 , teams the ever growing demand for ultra sophisticated design with intelligent and innovative technical solutions. To maintain an image of absolute minimalism the handle has been integrated into the doors where it remains invisible. The stainless steel worktop rests on a light, aluminum frame creating a void between base and top. Other elegant technical solutions such as the Blu-motion seal-mechanism that allows the doors of the units to recede softly and silently close are standard. This truly pioneering design introduces the suspended base module, kept in suspension by a built-in L-shaped steel joint. Supported on one side by a low open faced module and fixed to the floor behind a regular base unit on the other the units appear to be weightless. Whilst fulfilling all practical necessities this modular entity contradicts all traditional ideas of a kitchen.

Nightstand with 3 curved drawers complete of metal runners total removable. Made of solid wood is available in a wide range of finishes and can be fully customized

3 seater sofa, comfortable, warm and enveloping, for your moments of relax. This sofa is one of a range of comfortable luxury sofas, all made by hands and available in a wide range of variants of measures and original fabrics or leathers.

VELFAC Classic windows in wood / aluminum is a window system specifically designed for window replacements in older buildings. Or for new houses in the old style. The series contains Dannebrog windows mansion windows, farmhouse windows and Frederiksberg w

VELFAC Classic windows in wood / aluminum is a window system specifically designed for window replacements in older buildings. Or for new houses in the old style. The series contains Dannebrog windows mansion windows, farmhouse windows and Frederiksberg w

Part numbers: PR0789 These models are designed and manufactured by Mediclinics in steel 0.8 mm thick and they are available in white epoxy finish. They have been thought to be used in restaurants, offices, hospitals, etc. and provide value added to the design. All of these are capable of holding 3 standard toilet paper rolls or a Ø275mm industrial paper roll. The 3 standard toilet paper rolls option, includes an automatic mechanism, based in a revolvering mechanism, which causes the next roll to drop once the bottom roll has been used. Ø275mm industrial paper roll option has an axis with anti-spin brake by inertia, to ensure a more rational use of the paper. With anti-vandalism features, all of these include a special key for opening the casing.

Part numbers: PR0789C &amp; PR0789CS These models are designed and manufactured by Mediclinics in AISI 304 stainless steel 0.8 mm thick and they are available in two diferent types of finishes: bright and satin. They have been thought to be used in restaurants, offices, hospitals, etc. and provide value added to the design. All of these are capable of holding 3 standard toilet paper rolls or a Ø275mm industrial paper roll. The 3 standard toilet paper rolls option, includes an automatic mechanism, based in a revolvering mechanism, which causes the next roll to drop once the bottom roll has been used. Ø275mm industrial paper roll option has an axis with anti-spin brake by inertia, to ensure a more rational use of the paper. With anti-vandalism features, all of these include a special key for opening the casing.

LUXURIOUS INDOOR SOFA Iron. Leather. Glass. The Monaco lounge series combines these natural materials into an exclusive indoor range with a elegant architectural form. We now extend the Monaco range with two elegant sofas, the series now consist of two sofas, the iconic chair and three glass topped tables. The Monaco Lounge Sofa manages to combine comfort on a large scale without being to bulky. Designed for both in the home and public environments, slim lines in a large format is the Monaco Lounge Sofa, elegant yet evident in it’s form. The iron frames are coated and come in three varied colours. Available in four different luxurious leathers and in two different fabrics. Material Selection As with all our furniture we always carefully selected only the very finest materials. Our leather comes exclusively from the Swedsih company ELMO whose animals all come from within Scandinavia. Each skin celebrates it’s natural heritage with insect bites and visible scars. We have chosen to use two-ply leather which is glued offering its beautiful surface on both sides. The cushions are then stuffed with down to achieve the highest level of luxury, comfort and durability. Designers Mats Broberg &amp; Johan Ridderstråle has won several awards such as the Wallpaper Design Award, the Elle Decoration Design Award, Good Design Award and Residences Net Designers.

Straight or corner bench, with seat of either solid plank or laths, with optional armrest, backrest and minimal space.

Door with 2, 3 or 4 sliding leaves, arch top, sidelight and transom.

Door with 2, 3 or 4 sliding leaves, arch top, sidelight and transom.

Door with 2, 3 or 4 sliding leaves, arch top and transom.

Door with 2, 3 or 4 sliding leaves, arch top, 2 sidelights and transom.

3 Cinema Armchairs

#http://www.idobathroom.com www.bimlab.fi changelog 1.3.2003 -initial release

Tabelle als Etikett: Es kann entweder 1. eine Text-Liste mit zusätzlich angegebenen Zahlen addieren oder 2. die Schichten-Aufbauten von Decken, Wänden, Schalen und Dächern 3. Einer Decke als Etikett die OK FBOK + RDOK hinschreiben auslesen, tabellarisch darstellen und die Dicken addieren. Eingebaut auch deckende Hintergrundschraffuren, sowie zusätzliche bauteilbezogene Infos darunter. Dient als Programmierdemo - ist aber durchaus in echter Planung verwendbar - etwa ini Darstellung von Schnitten und Grundrissen

editable section-area for a 3D-Tube-polygone = Demonstration of the functionality af an freeform 3D profilewall Grundriss-Querschnitt der 3D-Tube erweiterbar - veränderbar - ebenso wie der Polygonzug im Grundriss. System - Demo für Freiform 3D Profil-Wand 31.10.2014: 2 weitere Querprofile hinzugefügt. Die 3 Polygon-Querschnitte sind nun auch direkt im 3D editierbar 2.11.2014: Zusatz-Punkte auf fixem Wert möglich - aber nicht 0 (eps). In diesem Fall wird die Breite des 1. Profiles als Abstand genommen. Der fixe Abstand ermöglicht die Kopie und dann die Änderung des kopierten Element-Profiles und der Pfad bleibt der gleiche! 3.10.2014 Additional possible 50 rectangular tubes generated from Array

editable section-area for a 3D-Tube-polygone = Demonstration of the functionality af an freeform 3D profilewall Grundriss-Querschnitt der 3D-Tube erweiterbar - veränderbar - ebenso wie der Polygonzug im Grundriss. System - Demo für Freiform 3D Profil-Wand 31.10.2014: 2 weitere Querprofile hinzugefügt. Die 3 Polygon-Querschnitte sind nun auch direkt im 3D editierbar 2.11.2014: Zusatz-Punkte auf fixem Wert möglich - aber nicht 0 (eps). In diesem Fall wird die Breite des 1. Profiles als Abstand genommen. Der fixe Abstand ermöglicht die Kopie und dann die Änderung des kopierten Element-Profiles und der Pfad bleibt der gleiche!

The cover for the iPad 3

#http://www.kominy-kominy.cz Kompketní komínová sestava Komín-Stav s.r.o. Nová Lipová 638 251 69 Velké Popovice www.kominy-kominy.cz Checked & Updated by BIMsoft s.r.o. www.bimsoft.cz © BIMsoft s.r.o. 2013 Společnost BIMsoft byla založena začátkem roku 2013 z důvodu rostoucí poptávky v BIM prostředí. Hned od začátku působení společnosti BIMsoft jsme se zaměřeli na 3 základní značky BIM softwarů( archicad, revit, allplan) pro které jsem začali nabízet komplexní služby z hlediska BIM prostředí. Od samotné analýzy sortimentu výrobce, dále pak samotnou realizaci převedení sortimentu do BIM modelů až po samotnou distribuci těchto BIM prvků skrze marketingové kanály jednotlivých výrobců BIM softwarů a e-kanalů společnosti BIMsoft. Společnost BIMsoft jako jediný vývojářský tým v České Republice vyvýjí podle nejnovějších standartů Open BIM

#http://bimcomponents.com Aarsland Corner Table Office corner table 120x120 cm size with 3 legtypes. developed by [eptar] ltd.

#http://bimcomponents.com Aarsland L-shape Table Office L-shape table 2 sizes with 3 legtypes. developed by [eptar] ltd.

#http://bimcomponents.com Aarsland Office Table Office table 60-180 cm wide with 3 legtypes. developed by [eptar] ltd.

#http://bimcomponents.com Aarsland Office Table Office table 60-180cm width with 3 legtypes. developed by [eptar] ltd.

#http://bimcomponents.com Aarsland Office Tray Office Trolley 43x60x63cm with 3 or 4 drawers. developed by [eptar] ltd.

Simple dynamic poly area with ability to display it's area and circumreference. Version 2 - added AS/NZS 3500.3.2:1998 slope factor.

A standard New Zealand give-way sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

A standard New Zealand roundabout give-way sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views.

A standard New Zealand speed-limit street sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions, choose the speed limit (10km/h up to Open Road speed in steps of 10) and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

A standard New Zealand stop street sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions, and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

Door with 2, 3 or 4 sliding leaves.

Door with 2, 3 or 4 sliding leaves and 2 sidelights.

Door with 2, 3 or 4 sliding leaves and sidelight.

Door with 2, 3 or 4 sliding leaves, sidelight and transom.

Door with 2, 3 or 4 sliding leaves and sidelight.

Door with 2, 3 or 4 sliding leaves, sidelight and transom.

Door with 2, 3 or 4 sliding leaves and transom.

Door with 2, 3 or 4 sliding leaves, 2 sidelights and transom.

Stahlkaminobjekt 3 - einfacher Stahlkamin aus Teilen

#http://www.bimsoft.cz/cs/tondach-archicad TONDACH doplokové tašky Created: october, 2014 Designed & Developed by BIMsoft s.r.o. #http://www.bimsoft.cz ©BIMsoft s.r.o. 2014 Společnost BIMsoft byla založena začátkem roku 2013 z důvodu rostoucí poptávky v BIM prostředí. Hned od začátku působení společnosti BIMsoft jsme se zaměřeli na 3 základní značky BIM softwarů( archicad, revit, allplan) pro které jsem začali nabízet komplexní služby z hlediska BIM prostředí. Od samotné analýzy sortimentu výrobce, dále pak samotnou realizaci převedení sortimentu do BIM modelů až po samotnou distribuci těchto BIM prvků skrze marketingové kanály jednotlivých výrobců BIM softwarů a e-kanalů společnosti BIMsoft. Společnost BIMsoft jako jediný vývojářský tým v České Republice vyvýjí podle nejnovějších standartů Open BIM

#http://www.bimsoft.cz/cs/tondach-archicad TONDACH doplokové tašky okrajové Created: october, 2014 Designed & Developed by BIMsoft s.r.o. #http://www.bimsoft.cz ©BIMsoft s.r.o. 2014 Společnost BIMsoft byla založena začátkem roku 2013 z důvodu rostoucí poptávky v BIM prostředí. Hned od začátku působení společnosti BIMsoft jsme se zaměřeli na 3 základní značky BIM softwarů( archicad, revit, allplan) pro které jsem začali nabízet komplexní služby z hlediska BIM prostředí. Od samotné analýzy sortimentu výrobce, dále pak samotnou realizaci převedení sortimentu do BIM modelů až po samotnou distribuci těchto BIM prvků skrze marketingové kanály jednotlivých výrobců BIM softwarů a e-kanalů společnosti BIMsoft. Společnost BIMsoft jako jediný vývojářský tým v České Republice vyvýjí podle nejnovějších standartů Open BIM

#http://www.bimsoft.cz/cs/tondach-archicad TONDACH doplokové tašky Created: october, 2014 Designed & Developed by BIMsoft s.r.o. #http://www.bimsoft.cz ©BIMsoft s.r.o. 2014 Společnost BIMsoft byla založena začátkem roku 2013 z důvodu rostoucí poptávky v BIM prostředí. Hned od začátku působení společnosti BIMsoft jsme se zaměřeli na 3 základní značky BIM softwarů( archicad, revit, allplan) pro které jsem začali nabízet komplexní služby z hlediska BIM prostředí. Od samotné analýzy sortimentu výrobce, dále pak samotnou realizaci převedení sortimentu do BIM modelů až po samotnou distribuci těchto BIM prvků skrze marketingové kanály jednotlivých výrobců BIM softwarů a e-kanalů společnosti BIMsoft. Společnost BIMsoft jako jediný vývojářský tým v České Republice vyvýjí podle nejnovějších standartů Open BIM

Household wind turbine with 2 or 3 blades. Can be used for animations.

To reduce impact and ambient noise and enhance underfoot comfort and wellbeing, Tarkett’s Silencio xf™2 offers an acoustic linoleum solution with sound reduction of 18dB. With a total thickness of 3.8mm, it’s made in a two-layer construction of 2.5mm linoleum with a 1.3mm pre-bonded foam underlay. ■ Floor covering with 18dB sound reduction ■ 2.5mm Linoleum Veneto xf² on jute backing ■ 1.3mm recycled polyurethane foam backing ■ Xf² surface treatment for a smoother appearance and improved performance ■ Easy cleaning and maintenance, no need for polish and wax, for highly cost effective flooring ■ Available in all Veneto colours.

Siphon cover LAUFEN PRO S, sanitary ceramic matching washbasin order no. 81096.2, 81096.3, 81096.4, 81096.7, 81396.5, 81396.6, 81496.8 (not for options with 3 tap holes) Further options: Surface refinement LCC (only white) Order no. 81996.3

Pedestal LAUFEN PRO S, sanitary ceramic matching washbasin order no. 81096.2, 81096.3, 81096.4, 81096.7, 81396.5, 81396.6, 81496.8 Further options: Surface refinement LCC (only white) Order no. 81996.2

Drop in basin LAUFEN PRO S, sanitary ceramic dimensions 560 x 440 mm, angular 1 centre tap hole, overflow in front Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes, without overflow, bathtubs, furniture Order no. 81896.3

Ceiling Mount Points 3 pcs M3 x 5 depth Power requirements 3.0-1.3A, 100-240V, 50-60Hz Conformances CE, FCC Class A, cCSAus Operating temperature 0 - 40°C Operating humidity 20-80% RH Storage conditions 10-90% RH Available colour Black, White Warranty 3 years standard warranty, 500 hours or 90 days on lamp (whichever comes first) Optional 2 years, 24/7 operation warranty. Conditions apply

GELATO means ice in Italtian. The side view of the sofa can look like the shape of a soft ice. Soft and comfortable. Thick seat, but light and airy just the same, floating over light cast molded legs. Olav Eldøy is one of Scandinavia&apos;s leading designers, mostly known for good esthetic characteristic furniture. GELATO attend to the the rigid demand to function, comfort and system. One leg, one right module and a corner module give the user many variation possibilities in furnishing. The leg solution also makes it maintanence of the locality easy. GELATO is available as a chair, 2 and 3 seater, or as a modular sofa with or without a linking table. Upholstered arms are available on request. GELATO is delivered with a standard sofa hight, but can also be delivered in heights suited for dining areas.

[LIST] Highly thermally insulated sliding and lift-and-slide system Uw values of &lt; 1.3 W/(m²K), depending on the design Excellent drainage system with watertightness up to 1,050 Pa Sliding and lift-and-slide systems with optimised thermal insulation Vent weight up to 300 kg, available for up to 400 kg special design High-quality fi ttings components for easy operation High degree of transparency due to large vent sizes of up to 9 m², depending on the design [/LIST]

[LIST] Horizontal sliding wall with double glazing and a surrounding frame made of thermally insulated profiles With their versatile glass partitions, DORMA provides the ideal solution for linking or separating rooms according to your individual requirements. Thanks to a large range of components, these versatile systems add security, provide noise insulation, and cut energy costs - just as desired. Ideal for Shopfront, Shopfront with thermal insulation requirements, Balcony Different parking layouts available Glass types Toughened laminated safetyglass, 8 mm - 49 mm. Insulating glass on request Max. system height 3000 mm Max. panel width 1100 mm Max. panel weight 120 kg (depends on type of panel) Panel types Bedstop end panel, Single action sliding panel, Sliding panel Sound Insulation DIN 52 210 Teil 3, 27 dB Thermal Insulation DIN EN ISO 10077-1 and DIN EN ISO 10077-2 Ventilation Class 2 (DIN EN 1026) Wind load resistance Class B3 (DIN EN 12211) [/LIST]

[LIST] Thermally insulated sliding and lift-and-slide system Thermal insulation in accordance with DIN EN ISO 10077, Part 1, Uw values of 1.9 W/(m²K), and a unit size of 2,500 mm x 2,500 mm, double glazing with a Ug value of 1.1 W/(m²K) Vent sizes: maximum width 3,000 mm maximum height 3,000 mm Vent weight up to 400 kg Watertightness up to class 9A in accordance with DIN EN 12208 Burglar resistance up to class RC 2 (WK2) Wide choice due to single, double and triple track outer frames [/LIST]

CI System Continuous Rooflight B - Energy-efficient and superior statics The first continuous rooflight with complete thermal separation with approval for use in Germany and throughout Europe – for an optimised energy balance. With the CI System Continuous Rooflight B, we have developed a daylight system for intelligent building management that breaks new ground in terms of energy efficiency and structural design. In doing so, we have closely focused on intelligence – on well-engineered individual components in a completely heat-insulated, very economical and sturdy overall system. We call it TIP: Total Insulated Product. [LIST] Numerous glazing types Dimensions: length: endless width: 0.84 m to 6.00 m (inside dimension of frame) Ug values of 3.1 to 1.2 W/m²K Available Smoke and heat ventilation units (tested to EN 12101-2) European Technical Approval -ETA and German General Technical Approvals (ABZ) Enviromental product declararation acc. to EN 15804 [/LIST]

Modario®, élément de projecteur, en acier, aluminium blanc (RAL 9006), longueur: 598 mm, hauteur: 280mm, LED couleur de lumière: 840, blanc froid, ballast: BE, avec connecteur, 3 broches, avec sélection de phase, raccordement au secteur: 230V, AC, 0/50..60Hz, ballast intégré, orientation de la lumière primaire avec réflecteur, en aluminium, degré de protection (total): IP20, classe de protection (total): CS I (mise à la terre), marquage: CE, ENEC, symbole de protection: F, température ambiante admissible à l&apos;intérieur: +10..+35°C, unité d&apos;emballage: 1 pièce

Lunis 2® mini, downlight, orientation de la lumière avec réflecteur Darklight, en plastique, métallisé en aluminium, brillant, BAP65 (L≤ 1000cd/m²), diffusion de lumière: direct distribution, LED couleur de lumière: 830, blanc chaud, ballast: BE, avec borne, 3 broches, 2,5mm² max., raccordement au secteur: 230V, AC, 50Hz, boîtier de luminaire, en plastique, blanc, diamètre: 172 mm, profondeur d’encastrement: 180 mm, zone de serrage: 1..40mm, bague de montage, plat, en plastique, blanc, degré de protection (total): IP20, classe de protection (total): CS I (mise à la terre), marquage: CE, ENEC en préparation, température ambiante admissible à l’intérieur: ≤ +25°C,

[LIST] Folding sliding system Highly thermally insulated construction with Uw-values of &lt; 1.3 W/(m²K) Narrow face widths from 112 mm (standard fold), basic depth of 80 mm and glass thicknesses of up to 57 mm Flat, thermally insulated threshold allows easy access Centre gasket integrated in the outer frame, three drainage levels in the vent as well as glazing rebate insulation Units can be folded to the right, left, inwards or outwards as required Burglar resistance up to class RC 2 (WK2) Schüco AWS 70 BS.HI window vent can be integrated as a turn / tilt window into the folding vent [/LIST]

[LIST] Highly thermally insulated aluminium window system Uf = 1.2 W/(m²K) (PT insulating bars) and Uf = 1.3 W/(m²K) (PA insulating bars) with a face width of 117 mm Uw = 0.90 W/(m²K) (PT insulating bars) and Uw = 0.93 W/(m²K) (PA insulating bars) with Ug = 0.6 W/(m²K) and plastic spacer Flexible level of insulation due to different design options Integration of the new Schüco AvanTec SimplySmart fittings range [/LIST]

[LIST] Horizontal sliding wall with double glazing and a surrounding frame made of thermally insulated profiles Different parking layouts available Bottom profile Thermal break and water channel (optional) Track rail with optional thermal break Insulation value U of approx. 1,5 W/m²K (with standard insulating glass) Meets the requirements of the German Energy Saving Ordinance EnEV Combined with door closer types TS 92, ITS 96 3-6, Push handles, ISEO Multilock Pivoting-sliding panels equipped with an ITS 96 3-6 concealed door closer Operation Easy, one-handed single throw of the lock bar to switch between the door and sliding functions, with no bending and no crank operation 40% improvement in thermal separation value (compared to the predecessor model) Heat transfer coefficient in accordance with DIN EN ISO 10077-1 and 10077-2 Endurance DIN 1527 Class 3 (25000 cycles) for suspend sliding doors &gt; 100kg Impact DIN EN 13049 Class 3 Corrosion DIN EN 1670 Class 3 The product will be available end 2015 [/LIST]

[LIST] Revolving doors with 3 or 4 leafs The KTV revolving door range is designed for installation in entrance areas where interior environmental control coupled with elegant aesthetics are desired. Available as Manual, Automatic, Positional or Servomatic, the KTV range offers flexibility in design and function. Operation Modes Manual, Automatic, Positional and Servomatic operation Diamater any from 2000 mm to 3400 mm. Standard fixed diameters of 3600 mm and 3800 mm are also available. Floor mounted or ceiling mounted drive units for powered doors Glazed or solid canopy Robust framing or fine frame option Optional: Night shields for additional protection Integrated with DORMA CODIC MasterCard or MATRIX Professional Access Control solutions Certification BS EN 16005 Benefits are flexible design options to meet project specific requirments, DORMA KTV revolving doors effectively reduce noise, dust and dirt as well as greatly contributing to a reduction in building climate control when compared with conventional automatic doors. [/LIST]

CI System Glass Architecture PR60 - Living with light Develop customised shapes, design visual highlights and set aesthetic standards in a prestigious building project while still enjoying first-class energy efficiency: Such requirements are easy to meet with CI System Glass Architecture PR60. Naturally, we will also provide optimum integration of photovoltaic systems as well as connection to building control systems. [LIST] Extremely stable supporting structure made of rigid aluminium Efficient ventilation of glass rebates Practically no design constraints between 0 ° to 90 ° Resistant against wind load (Class C4/B5 EN 12210) Watertightness (Class E 1200 EN 12208) Permeability to air (Class 4 EN 12207) Heat transfer coefficient of the jambs and transoms (Um/t) of 1.3 to 0.72 W/(m²K) (depending on glazing thickness) Enviromental product declaration acc. to EN 15804 Available as Passive House Suitable Component - CI System Glass Architecture PR60energysave [/LIST]

The Tork Elevation® Matic® Roll Hand Towel Dispenser with Intuition® Sensor presents the most advanced electronic system in the industry today. The touch-free electronic virtually eliminates cross contamination while cutting back on supply waste. Each unit features a choice of two dispensing modes. The towel remains inside the cabinet until the user activates the sensor, delivers maximum hygiene. An adjustable towel length of 8 inches to 24 inches, and a stub roll compartment combine to deliver more precise control of consumption are a few of the features available. Batteries lasts up to 40 rolls on average with normal usage. It&apos;s easy to reach and simple to reload. Versatile Installation- can be mounted directly to wall or within a recessed compartment. Numerous back-plate mounting slots fit most any pattern. Utilizes any Tork H1 Roll Towel. Uses 3 &quot;D size&quot; batteries.

The Tork Elevation® Matic® Roll Hand Towel Dispenser with Intuition® Sensor presents the most advanced electronic system in the industry today. The touch-free electronic virtually eliminates cross contamination while cutting back on supply waste. Each unit features a choice of two dispensing modes. The towel remains inside the cabinet until the user activates the sensor, delivers maximum hygiene. An adjustable towel length of 8 inches to 24 inches, and a stub roll compartment combine to deliver more precise control of consumption are a few of the features available. Batteries lasts up to 40 rolls on average with normal usage. It&apos;s easy to reach and simple to reload. Versatile Installation- can be mounted directly to wall or within a recessed compartment. Numerous back-plate mounting slots fit most any pattern. Utilizes any Tork H1 Roll Towel. Uses 3 &quot;D size&quot; batteries.

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

Ecophon Hygiene Foodtec A C3 is a wall to wall, sound-absorbing ceiling system intended for environments where there is risk for contaminations, and where frequent cleaning is required. This system is recommended where humidity levels are occasionally high. Examples of applications: the food and beverage industries, restaurants and catering kitchens. The system consists of Ecophon Hygiene Foodtec A tiles, which have a core of high density glass wool utilizing the 3RD Technology and a painted stain protected Akutex HS surface. The back and the edges are painted. The tile is designed to be demounted and cleaned on a regular basis. The supporting structure is a corrosion protected exposed Connect T24 C3 grid of lacquered galvanised steel. The weight of the system is approximately 3,5 kg/m2 (20 mm) and 5 kg/m2 (40 mm). The tiles should be secured to the grid with Connect Hygiene clips in order to withstand pressure during cleaning and to minimise dirt traps.

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

Front coat rack (Lasse Pettersson, Lennart Notman, 2004). Coat rack is available in lengths 250, 500, 1000, 1500 and 2000 mm and in solid oak, birch, standard colors and standard stains on oak. Hooks from 3 up to 20 in solid wenge wood. Secured directly t

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

This is a Moelven showcase. The showcase exemplifies the Moelven internal wall systems, Flush Front - Uni wall 50 - Uni wall 42 The showcase denomstrates for the BIM systems, ArchiCAD and Revit, how the Moelven products work together in pratice. Under the downloads tab you can find the following: 1. An ArchiCAD PLA (Archive file) 2. An ArchiCAD .mod file (Module file) 3 A Revit RVT file (Project file) 4. A BIMx file.

For applications where an attractive suspended ceiling is required and easy removal of individual tiles is essential. Ecophon Focus E has a recessed visible grid and a tegular edge design, creating a ceiling with a shadow effect that accentuates each tile and partially conceals the grid system. The visible surface of each tile is 10 mm below the grid. Each tile is easily demountable. The systems consist of Ecophon Focus E tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are painted. For best performance and system quality, use Ecophon Connect grid and accessories. The grid is manufactured from galvanized steel.

For applications where a robust suspended ceiling system is required. Ecophon Focus A has an exposed grid system. Each tile is easily demountable. The systems consist of Ecophon Focus A tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are primed. The grid is manufactured from galvanized steel.

There has been a welcome addition to the Lilla Åland family. A children’s high chair model that we have developed, together with the Siv &amp; Carl Malmsten&apos;s Memorial Foundation and Leif Burman. This chair is designed for children about 3 years of age and older and has a seat height of 52 cm. When the child turns older and may not need the extra seat height, then the Lilla Åland children’s chair becomes a nice solitary piece of furniture in the home. In other words, a chair for life. Each backstick is grooved at both ends, providing a larger surface for the glue to stick and thus offer greater durability. The backsticks taper off upwards, forming a strong, sprung and comfortable backrest. The upper bow section further reinforces comfort. Milled out seat for high sitting comfort. Reinforcement with cruciform between the chair legs. The seat also has an extra cross stretcher where children can place their feet to give them extra support.Available in natural lacquer, oil or stain. Design: Carl Malmsten. NOTE! The Lilla Åland children’s chair is not fi tted with a safety harness and is therefore not suitable for very young children.

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

A lower, slimmer version of our existing Vista music and TV furniture. You decide the look of the furniture by choosing drawers, cabinets, and/or shelves. This makes Vista more than just music and TV storage. Vista low is available in two different models – 2 or 3 section. Vista has vents in the back for cable routing. The drawers are deep enough to store video tapes, DVDs and CDs. Solid birch drawer fronts, drawer sides and damping expansion fittings give Vista an exclusive feel. Vista low is available in two lengths and can be obtained with drawers, doors (with hardened, frosted glass) or open shelves. You can also choose between wood legs and/or wheels. Design: Marit Stigsdotter.

A flexible, easy-to-use stool, taking its inspiration from olden day milking stools. Despite its simplicity, it has many details that indicate careful detail work for both decorative and functional purposes.The stool has pinned and wedged legs that go right through the stool. This makes the assembly durable and contributes to the well-finished look of the stool. The seat is manufactured in a two-layer glued joint for maximum strength. Handle in the seat makes the stool easy to carry and gives it its special character. The stool is stackable, 3. Supplied ready-assembled. Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Fellow is a personal piece of furniture that can be formed and shaped individually, changing appearance and characteristics accordingly. Create your own Fellow by selecting different fabrics or leather for different sections. Fellow thrives in locations like hotel lobbys and lounge areas. Fellow is also available without armrests and can be connected to become a sofa. When nearly all sofas and armchairs are covered with one of the company´s chosen materials, Fellow offers you the opportunity to choose and cover your armchair or sofa with whatever meets your tastes and needs. Perhaps a more conservative choice for a business man in a meeting on Wall Street? Or, why not something colourful for fun loving people in a hotel lobby? The only limits are your creativity. Be part of the result! Each Fellow section can be covered in 1 to 3 different colours/fabrics. Maximum one colour per part; front of seat, middle part incl. armrests and backrest. Design: Fredrik Mattson.

Interior Add On Solution Linen 60/2ft (std. depth). Add functions suitable for storage of many types of items such as linen, clothes etc. includes 3 wire shelves and 4 medium deep wire baskets with pull-out function. To be used together with &quot;Interior Solution Basic&quot;. Suitable for housing projects both behind sliding doors as well as in Walk In closets. Solution based on our unique elfa Hanging System for high flexibility, easy and fast installation. Place add on solution (bedroom and/or linen solutions) at the far left or far rigth side if used together with sliding doors. Use Clearance function to ensure correct depth for best practical function. If multiple sections are used, the second section from the left is adjusted in width in order to match total width. Please note that pull-out functions can not be adjusted in width.

For applications requiring a dark ceiling having low light reflection and good sound absorbing properties. Ecophon Sombra A has an exposed grid system. Each tile is easily demountable. The system consists of Ecophon Sombra A tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m² (4 kg/m² with Ecophon Extra Bass). The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface is a matt black batch painted glass tissue and the back of the tile is covered with glass tissue. The edges are natural. For special applications i.e. cinemas, tiles with a sound reflecting surface, Sombra A/gamma, are available. To improve absorption in the low frequency range, Ecophon Extra Bass can be installed on top of the suspended ceiling. For best performance and system quality, use Ecophon Connect grid and accessories. The grid is manufactured from galvanized steel.

For applications where a robust suspended ceiling system is required. Ecophon Focus A has an exposed grid system. Each tile is easily demountable. The systems consist of Ecophon Focus A tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are primed. The grid is manufactured from galvanized steel.

Pladur® Sound Conditioning Solution. Pladur® FON+, Suspended Ceiling formed by a simple or double (primary and secondary) structure of galvanised steel sheet profiles, based on Pladur® T-60 Profiles, properly suspended from the ceiling structure with Pladur® hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. Pladur® FON+ Boards are then screwed to the simple or secondary structure. Proportional part of the Pladur® materials: screws, compounds, joint tapes, resilient tape, etc, totally finished with a Level 3 (Q3) Quality Finish. Mineral Wool may also be used (without vapour barrier or Kraft paper) on the reverse side of the boards and profiles. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Ceiling, formed by a structure of galvanised steel sheet profiles, based on Pladur® Furring Channels anchored directly to the base wall, with one or more Pladur® boards screwed to the external side. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Sound Conditioning Solution. Pladur® FON+, Suspended Ceiling formed by a simple or double (primary and secondary) structure of galvanised steel sheet profiles, based on Pladur® T-60 Profiles, properly suspended from the ceiling structure with Pladur® hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. Pladur® FON+ Boards are then screwed to the simple or secondary structure. Proportional part of the Pladur® materials: screws, compounds, joint tapes, resilient tape, etc, totally finished with a Level 3 (Q3) Quality Finish. Mineral Wool may also be used (without vapour barrier or Kraft paper) on the reverse side of the boards and profiles. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Wall Lining, formed by a structure of galvanised steel sheet profiles formed by Pladur® Furring Channels attached directly to the base wall, with one or more PLADUR® boards screwed to the wall’s external face. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape, etc. totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Wall Lining, formed by a structure of galvanised steel sheet profiles formed by Pladur® Furring Channels attached directly to the base wall, with one or more PLADUR® boards screwed to the wall’s external face. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape, etc. totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Direct Bond Wall Lining, formed by a Pladur® board attached directly to the supporting wall using clumps of Pladur® Bonding Compound laid every 400 mm in both directions. Proportional part of the Pladur® materials: compound, joint tape, bonding compound, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Direct Bond Wall Lining, formed by a Pladur® board attached directly to the supporting wall using clumps of Pladur® Bonding Compound laid every 400 mm in both directions. Proportional part of the Pladur® materials: compound, joint tape, bonding compound, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Full body porcelain tile in 3,5 and 5,6 mm thick. The largest slab is 1000x3000 mm, twenty seven colors, two finishes and four diferent sizes available. Water absorption E&lt;0,5 %, BIa group according to UNE-EN 14411. H&amp;C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Ceiling, formed by a structure of galvanised steel sheet profiles, based on Pladur® Furring Channels anchored directly to the base wall, with one or more Pladur® boards screwed to the external side. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Corner shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Rectangular shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109)

Rectangular shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109)

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Rectangular shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109)

Rectangular shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109)

Rectangular shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Bathtub made of 3,5 mm enamelled steel with holes for the mounting of handles Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109) Charge 044 – with antinoise pads and tap holes UK standard

Rectangular shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109)

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Corner shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.2)

Rectangular shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109)

Bathtub made of 3,5 mm enamelled steel Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109 only in combination with antinoise set order no. 29898.0) Charge 044 – with antinoise pads and tap holes UK standard

Square shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Corner shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.1)

Bathtub made of 3,5 mm enamelled steel Charge 040 – with antinoise pads (fulfil DIN 4109) Charge 041 – with antinoise pads (fulfil SIA 181 and DIN 4109 only in combination with antinoise set order no. 29898.0) Charge 044 – with antinoise pads and tap holes UK standard

Corner shower tray made of 3,5 mm enamelled steel Charge 000 – without antinoise pads Charge 040 – with antinoise pads Charge 041 – with antinoise pads (to fulfil SIA 181 and DIN 4109 only in combination with antinoiseset order no. 29898.2)

Die erfolgreiche air-lux Aluminium Schiebefenster-Fassade kann mit nochmals verbesserten bauphysikalischen Leistungen einen weiteren Beitrag zur Energieeinsparung und Komfortverbesserung leisten. Mit air-lux 173 werden Schweizer Minergieanforderungen zum Lieferstandard. Die robuste, qualitativ hochwertige Konstruktion mit schmaler Profilansichtsbreite gewährleistet Prüfbestwerte in Grössen von bis zu 18 m2 (max. Dimension B x H 5.9 × 3 m oder 4.2 x 3 m). Das patentierte Schiebefenstersystem ist unterhaltsfrei, manuell sehr komfortabel bedienbar und mit einem einzigartigen luftunterstützten Dichtungskonzept ausgerüstet.

Floorstanding WC pan washdown LAUFEN MODERNA R, sanitary, ceramic, for cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 700 x 420 mm, outlet horizontal, VARIO vertical 70 - 305 mm, back to wall, concealed fixation, Special feature: concealed surfaces directing water are fully glazed, throughout, closed water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), cistern 82654.0, 82654.2, WC seat without cover 89354.7, WC seat and, cover 89354.2, 89354.3, WC seat and cover with automatic lowering, 89354.4 Order no. 82454.1

Floorstanding WC pan washdown KARTELL BY LAUFEN sanitary ceramic, for concealed cistern and floorstanding cistern Universal EN 997, EN 33, 4,5/3-l-flush, dimensions 370 x 560 x 430 mm, outlet horizontal, vertical 70 and 125 mm back to wall, concealed trap, concealed fixation Special feature: concealed surfaces directing water are fully glazed throughout, closed water rim, vacuum checked Further options / accessories: Surface refinement LCC (only white), floorstanding cistern 82866.0, 82866.1, 82866.3, 82866.4, WC seat and cover 89133.0, WC seat and cover with automatic lowering 89133.1 Order no. 82333.1

Siphonic urinal LAUFEN ANTERO, sanitary ceramic DIN 1390, EN 13407, dimensions 380 x 365 x 770 mm min. 0,5-l flush, ceramic siphon cover, water inlet concealed 1/2“, outlet horizontal, flushing rate minimum 0,3 l/s siphon replaceable without dismantling urinal, Special feature: Vacuum and performance tested, 1-litre siphon, waste connection pipe DN 50 (standard Europe, except CH and UK) and pipe DN 40 (standard CH) Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84015.3

Built in basin not grinded LAUFEN PRO, sanitary ceramic, EN 31, dimensions 595 x 430 mm, inside dimensions of the basin 550 x 380 mm, angular, without tap hole, overflow in front, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), glazed, outer surface, bathtubs, furniture Order no. 81196.3

Wallhung WC pan washdown LAUFEN MODERNA R, sanitary ceramic, for cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 670 x 345 mm, outlet horizontal, Special feature: concealed surfaces directing water are fully glazed, throughout, open water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), cistern 82654.0, 82654.2, WC seat without cover 89354.7, WC seat and, cover 89354.2, 89354.3, WC seat and cover with automatic lowering, 89354.4 Order no. 82054.5

Floorstanding bidet KARTELL BY LAUFEN sanitary ceramic EN 35, dimensions 370 x 560 x 430 mm 1 centre tap hole, waste and overflow system GEBERIT, back to wall, concealed trap, concealed fixation Special feature: overflow channel glazed, vacuum checked Further options: Surface refinement LCC (only white), 3 tap holes, ceramic valve cover plate Order no. 832331

Built in basin grinded LAUFEN PRO S, sanitary ceramic dimensions 525 x 400 mm, inside dimensions of the basin 490 x 360 mm, angular 1 centre tap hole, overflow in front Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, glazed outer surface, bathtubs, furniture Order no. 81196.6

Washbasin LAUFEN PRO LIBERTY, sanitary ceramic EN 31 dimensions 650 x 550 mm, symmetric 1 centre tap hole, with overflow Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), without tap holes, bathtubs, furniture Order no. 81195.3

Die erfolgreiche air-lux Aluminium Schiebefenster-Fassade kann mit nochmals verbesserten bauphysikalischen Leistungen einen weiteren Beitrag zur Energieeinsparung und Komfortverbesserung leisten. Mit air-lux 173 werden Schweizer Minergieanforderungen zum Lieferstandard. Die robuste, qualitativ hochwertige Konstruktion mit schmaler Profilansichtsbreite gewährleistet Prüfbestwerte in Grössen von bis zu 18 m2 (max. Dimension B x H 5.9 × 3 m oder 4.2 x 3 m). Das patentierte Schiebefenstersystem ist unterhaltsfrei, manuell sehr komfortabel bedienbar und mit einem einzigartigen luftunterstützten Dichtungskonzept ausgerüstet.

Comfort wallhung WC pan washdown LAUFEN MODERNA R, sanitary, ceramic, for concealed cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 560 x 400 mm, elevated a seated height with WC seat of 480 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, closed water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat without cover 89354.7, 89895.1, WC seat and cover 89354.2, 89354.3, 89895.0, WC seat and cover with automatic lowering 89354.4 Order no. 82054.6

Barrier free wallhung WC pan washdown LAUFEN MODERNA R, sanitary, ceramic, for concealed cistern, EN 997, 6/3-l-flush, dimensions 360 x 700 x 345 mm, accessible by wheelchair, lenght 700 mm, higher mounting necessary to, achieve a seated height of 480 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, open water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat without cover 89354.7, 89895.1, WC seat and cover 89354.2, 89354.3, 89895.0 Order no. 82054.7

Siphonic urinal LAUFEN LEMA, sanitary ceramic, DIN 1390, EN 13407, dimensions 350 x 400 x 700 mm, min. 0,5-l flush, ceramic siphon cover, water inlet concealed 1/2“, outlet, horizontal, flushing rate minimum 0,3 l/s, siphon replaceable without dismantling urinal, Special feature: Vacuum and performance tested, 1-litre siphon, waste, connection pipe DN 50 (standard Europe, except CH and UK) and pipe, DN 40 (standard CH), Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84019.7

Wallhung WC pan washdown LAUFEN MODERNA R, sanitary ceramic, for concealed cistern EN 997, EN 33, 6/3-l-flush, dimensions 360 x 560 x 340 mm Special feature: concealed surfaces directing water are fully glazed throughout, open water rim, vacuum checked Further options / accessories: Surface refinement LCC (only white), WC seat without cover 89354.7, WC seat and cover 89354.2, 89354.3, WC seat and cover with automatic lowering 89354.4 Order no. 82054.1

Wallhung WC pan Compact washdown LAUFEN MODERNA R, sanitary, ceramic, for concealed cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 490 x 305 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, open water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat without cover 89354.7, WC seat and cover 89354.2, 89354.3, WC seat and cover with automatic lowering 89354.4 Order no. 82054.3

Double washbasin LAUFEN PALACE, sanitary ceramic, EN 14688 / EN 31, dimensions 1300 x 480 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without, overflow, siphon cover, pedestal, towel rail left 38170.7, towel rail right, 38170.8 furniture Order no. 81070.8

Die erfolgreiche air-lux Aluminium Schiebefenster-Fassade kann mit nochmals verbesserten bauphysikalischen Leistungen einen weiteren Beitrag zur Energieeinsparung und Komfortverbesserung leisten. Mit air-lux 173 werden Schweizer Minergieanforderungen zum Lieferstandard. Die robuste, qualitativ hochwertige Konstruktion mit schmaler Profilansichtsbreite gewährleistet Prüfbestwerte in Grössen von bis zu 18 m2 (max. Dimension B x H 5.9 × 3 m oder 4.2 x 3 m). Das patentierte Schiebefenstersystem ist unterhaltsfrei, manuell sehr komfortabel bedienbar und mit einem einzigartigen luftunterstützten Dichtungskonzept ausgerüstet.

Wallhung WC rimless washdown LAUFEN MODERNA R, sanitary ceramic, for concealed cistern EN 997, EN 33, 6/3-l-flush, dimensions 360 x 560 x 360 mm Special feature: rimless, concealed surfaces directing water are fully glazed throughout, vacuum checked Further options / accessories: Surface refinement LCC (only white), WC seat without cover 89354.7, WC seat and cover 89354.2, 89354.3, WC seat and cover with automatic lowering 89354.4 Order no. 82054.2

Floorstanding bidet LAUFEN PALACE, sanitary ceramic, EN 35, dimensions 360 x 560 x 430 mm, 1 centre tap hole, back to wall, concealed trap, concealed fixation, Special feature: overflow channel glazed, vacuum checked, Further options: Surface refinement LCC (only white), 3 tap holes Order no. 83270.1

Burglary and fire certified security doors for homes and offices • Certified burglary and fire protection • Available with popular security keylocks • Colour and surface finishing options • For new and renovation buildings • Operation warranty 24 months Tested burgalry resistance against crowbars and similar mechanical tools. Grade 3 burglary resistance according to EN 1627. Fire protection for 45 minutes (EI 45). Soundproofing and isolation of external disturbing sounds for example from corridors and staircases (noise isolation 41 dB). Form and temperature insulation capacity maintained even during outside temperature variations. Federation of Finnish Financial Services has accepted KasoGuard security doors for structural burglary protection:

Testattua murtoturvaa sertifioidulla murtosuojaovella: • Asuin- ja liikehuoneistoihin • Uudis- ja saneerauskohteisiin • Vakiona Abloy- tai Mottura- avainlukitus • Saatavissa myös sähköisellä lukituksella • Laaja väri-, lisävaruste- ja pinnoitevalikoima • Tilauksesta saatavilla myös mittatilauskokoja • Helppo asennettavuus • Käyttötakuu 24 kk Turvaovi antaa suojaa ammattimurtovarkaita vastaan, jotka ovat varustautuneet mm. sorkkaraudoin. Testattu eurooppalaisen standardin ENV 1627 mukaan murtosuojaluokkaan 3. Turvaoven paloluokitus on EI 45. Massiivirunkoinen ovi on ääntä eristävä: äänen eristys on 41 dB. Epämiellyttävät ulkopuoliset äänet, kuten käytävämelu, portaikosta kantautuvat hälyäänet ja hissien käytöstä johtuvat äänet pidetään asuin- ja liiketilojen ulkopuolella.

Laminated timber window frame consisting of 3 or more layers. 58x72mm Nominal casing section and approx. 74mm increased thickness casement frame. Fitted with internal overhanging glass. Basic 4mm tempered enamelled stagger /18/4mm heat shield/18/4mm double glazing. Silver-coloured concealed hardware. External casing and casement alignment. Alignment with internal wall is obtained by means of a special installation system.

Washtop with cut out left for washbasin bowl 812331 Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop with cut out left and right for washbasin bowl 812332 Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop with center cut out for washbasin bowl 812332 Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop with cut out right for washbasin bowl 812331 Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop with cut out left and right for washbasin bowl 812331 Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop with cut out left for washbasin bowl 812332 Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop without cut out Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop with cut out right for washbasin bowl 812332 Body – Mineral marble with 3 mounting brackets max. load 150 kg

Washtop with center cut out for washbasin bowl 812331 Body – Mineral marble with 3 mounting brackets max. load 150 kg

The BL-C121A is a Wireless Network camera using 802.11g/b wireless technology. Includes a 10x digital zoom, simultaneous MPEG-4/JPEG and 3 LUX Color Night View Mode. Records up to 30 Frames per Second. Features Wireless Full Screen Monitoring Remote Monitoring from Cell phone 4-up, 9-up and 16-up Multi-Camera Pages Built in Web Server/IP Address (IPv4/v6) Built-in Microphone Thermal Sensor Image Transfer by Motion Detection Sensor Alert, Time Plug &amp; Play Installation Free Web Address Multi-Language Interface

The Ø150 Punkt Lamp is ideal for large halls and corridors where they constitute the general illumination of the room. The standard model is without shade at the bottom. The downlighter can be equipped with a 3 mm bottom shade of sandblown glass. This wil

Nyx 330 is available for wall mounting as well as a lantern for 3 to 6 meter poles. Possibility of one, two, or three lanterns on one pole. Like the other fittings in the Nyx series, the lantern is available in black and two grey colour variants, both sui

The Tema Parklygten is available in three sizes; 2.45, 3 and 3.5 metres. Only the 3 meter version is specified here. Made from hot-dipped galvanised steel. Supplied with base for embedment or with flanged base for mounting on solid ground. Available with

The Tema Parklygten is available in three sizes; 2.45, 3 and 3.5 metres. Made from hot-dipped galvanised steel. Supplied with base for embedment or with flanged base for mounting on solid ground. Available with E27 base, Compact fluorescent HF 42 W or Met

Cabi U Container is storage on wheels in powder-coated steel that fits discreetly under your desk with three drawers for all your storage needs. 3 drawers and interior including wheels.

The Tema Parklygten is available in three sizes; 2.45, 3 and 3.5 metres. Only the 3 meter version is specified here. Made from hot-dipped galvanised steel. Supplied with base for embedment or with flanged base for mounting on solid ground. Available with

WC seat and cover Universal LAUFEN FORM, Duroplast, removable, automatic lowering system, matching floorstanding WC pan, order no. 82195.6, 82195.7, 82195.8, 82195.9, 82295.1, 82495.5, 82495.6, 82495.7, 82495.8, 82495.9, 82595.5, 82595.6, 82595.7 and, wallhung WC pan, order no. 82095.0, 82095.1, 82095.2, 82095.5 Order no. 89395.3

Cutable countertop basin LAUFEN LIVING SQUARE, sanitary ceramic, EN 14688, dimensions 900 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 650 mm, with towel, rail cutable to 865 mm, integreated shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, with or without overflow, hole for soap dispenser, left or right, electronic valve unit to control water temperature and, flow rate, 3 tap holes distance 8 inches with overflow, towel rail 38143.3, furniture Order no. 81643.3

Washbasin bowl LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 600 x 425 mm, angular, 1 centre tap hole, glazed back undersurface ground, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, furniture Order no. 81143.2

Cutable countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 1000 x 460 mm, angular, basin left, 1 centre tap hole, Special feature: overflow channel glazed, cut one-sided to 700 - 980 mm, integreated shelf right, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, bespoke decoration, on ceramic shelf, towel rail 600 mm 89542.4 / 1000 mm 89542.6, furniture Order no. 81843.2

Washbasin undersurface ground LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 1000 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 2 tap holes distance 400 mm, 3 tap holes, without tap holes, 1 tap hole, without overflow, without tap holes and overflow, 3 tap holes distance, 8 inches, furniture Order no. 81843.8

Cutable double countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1500 x 380/510 mm, symmetric, per basin 1 centre tap hole, Special feature: overflow channel glazed, cutable to 1350 mm, integreated, shelves, with towel rail, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, and right, electronic valve unit to control water temperature and flow, rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81470.6

Compact wallhung WC pan washdown LAUFEN PALACE, sanitary, ceramic, for concealed cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 490 x 375 mm, concealed trap, concealed fixation, Special feature: concealed surfaces directing water are fully glazed, throughout, closed water rim, vacuum checkedFurther options / accessories: Surface refinement LCC (only white), WC seat and cover 89170.0, WC seat and cover with automatic, lowering 89170.1 Order no. 82070.3

Urinal division LAUFEN CINTO, sanitary ceramic dimensions 400 x 720 mm Order no. 84760.3

Cutable countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1500 x 380/510 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 900 mm, integreated, shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81170.6

Semi recessed basin LAUFEN PRO, sanitary ceramic, dimensions 560 x 440 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, bathtubs, furniture Order no. 81296.1

Countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 600 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, towel rail 89542.4, furniture Order no. 81743.3

Washbasin bowl LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 500 x 425 mm, angular, 1 centre tap hole, glazed back undersurface ground, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, furniture Order no. 81143.1

Double countertop basin LAUFEN LIVING SQUARE, sanitary ceramic, EN 14688, dimensions 1300 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, integreated shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, with or without overflow, hole for soap dispenser, left or right, electronic valve unit to control water temperature and, flow rate, 3 tap holes distance 8 inches with overflow, towel rail 38143.4, furniture Order no. 81643.6

Countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 800 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, towel rail 89542.5, furniture Order no. 81743.6

Cutable countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 1500 x 460 mm, angular, basin left, 1 centre tap hole, Special feature: overflow channel glazed, cut one-sided to 980 - 1480 mm, integreated shelf right, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, bespoke decoration, on ceramic shelf, towel rail 600 mm 89542.4 / 1000 mm 89542.6, furniture Order no. 81843.6

Double countertop basin LAUFEN PRO S, sanitary ceramic EN 31, dimensions 1300 x 460 mm, angular per basin 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white),per basin 3 tap holes, without tap holes, per basin 1 tap hole without overflow, without tap holes and overflow, per basin 3 tap holes distance 8 inches, per basin 3 tap holes without overflow, siphon cover, pedestal, towel rack, bathtubs, furniture Order no. 81496.8

Drop in basin wall mounted LAUFEN LIVING SQUARE, sanitary ceramic, EN 14688, dimensions 900 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, integreated shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, with or without overflow, hole for soap, dispenser left or right, electronic valve unit to control water temperature, and flow rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81643.4

Cutable double countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1500 x 380/510 mm, symmetric, per basin 1 centre tap hole, Special feature: overflow channel glazed, cutable to 1350 mm, integreated, shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, and right, electronic valve unit to control water temperature and flow, rate, 3 tap holes distance 8 inches with overflow, furniture, Order no. 81370.6

Cutable countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1200 x 380/510 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 900 mm, integreated, shelves, with towel rail, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81270.4

Compact washbasin undersurface ground LAUFEN PRO, sanitary ceramic, EN 31, dimensions 600 x 380 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, bathtubs, furniture Order no. 81795.9

Washbasin undersurface ground LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 800 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, furniture Order no. 81743.7

WC seat and cover Universal LAUFEN PRO, Duroplast, removable, matching floorstanding WC pan, order no. 82195.6, 82195.7, 82195.8, 82195.9, 82295.1, 82495.5, 82495.6, 82495.7, 82495.8, 82495.9, 82595.5, 82595.6, 82595.7 and, wallhung WC pan, order no. 82095.0, 82095.1, 82095.2, 82095.3, 82095.4, 82095.5 Order no. 89395.2

Washbasin undersurface ground LAUFEN PRO, sanitary ceramic, EN 31, dimensions 600 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, bathtubs, furniture Order no. 81795.2

Countertop basin KARTELL BY LAUFEN, SaphirKeramik EN 31, dimensions 600 x 460 mm, angular 1 centre tap hole, without overflow, valve without overflow always open Special feature: with special hidden drain, valve pre-assembled Further options / accessories: Surface refinement LCC (only white), without tap holes and overflow, 3 tap holes without overflow, 1 centre tap hole with hidden overflow, 3 tap holes with hidden overflow, bathtubs, shower trays, furniture, accessories Order no. 81033.5

Freestanding washbasin KARTELL BY LAUFEN, sanitary ceramic EN 31 dimensions 375 x 435 x 900 mm, angular 1 centre tap hole, without overflow, valve without overflow always open Special feature: with special hidden drain, valve pre-assembled Further options / accessories: Surface refinement LCC (only white), without tap holes and overflow, 3 tap holes without overflow, bathtubs, shower trays, furniture, accessories Order no. 81133.1

Cutable double countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1800 x 380/510 mm, symmetric, per basin 1 centre tap hole, Special feature: overflow channel glazed, cutable to 1350 mm, integreated, shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, and right, electronic valve unit to control water temperature and flow, rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81370.8

Cutable countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1800 x 380/510 mm, symmetric, 1 centre tap hole Special feature: overflow channel glazed, cutable to 900 mm, integreated shelves Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, with or without overflow, hole for soap dispenser left or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81170.8

Washbasin undersurface ground LAUFEN PRO, sanitary ceramic, EN 31, dimensions 550 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, bathtubs, furniture Order no. 81795.1

Countertop basin KARTELL BY LAUFEN, SaphirKeramik EN 31, dimensions 900 x 460 mm, angular 1 centre tap hole, without overflow, valve without overflow always open Special feature: with special hidden drain, valve pre-assembled Further options / accessories: Surface refinement LCC (only white), without tap holes and overflow, 3 tap holes without overflow, 1 centre tap hole with hidden overflow, 3 tap holes with hidden overflow, bathtubs, shower trays, furniture, accessoriese Order no. 81033.9

Barrier free wallhung WC pan washdown LAUFEN PRO, sanitary, ceramic, for concealed cistern, EN 997, 6/3-l-flush, dimensions 360 x 700 x 350 mm, accessible by wheelchair, lenght 700 mm, higher mounting necessary to, achieve a seated height of 480 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat 89295.0, 89395.4, 89895.1, WC seat and cover, 89195.0, 89295.1, 89395.2, 89895.0 Order no. 82095.3

Cutable countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1500 x 380/510 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 900 mm, integreated, shelves, with towel rail, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, furniture, Order no. 81270.6

Countertop basin KARTELL BY LAUFEN, SaphirKeramik EN 31, dimensions 600 x 460 mm, angular 1 centre tap hole, without overflow, valve without overflow always open Special feature: with special hidden drain, valve pre-assembled Further options / accessories: Surface refinement LCC (only white), without tap holes and overflow, 3 tap holes without overflow, 1 centre tap hole with hidden overflow, 3 tap holes with hidden overflow, bathtubs, shower trays, furniture, accessories Order no. 81033.4

Wallhung WC pan washdown LAUFEN LIVING, sanitary ceramic, for, concealed cistern, 6/3-l-flush, dimensions 360 x 560 x 375 mm, concealed trap, concealed fixation, Special feature: concealed surfaces directing water are fully glazed, throughout, closed water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat and cover 89243.3, WC seat and cover with automatic lowering, 89243.4 Order no. 82043.5

Washbasin bowl KARTELL BY LAUFEN, SaphirKeramik EN 31 dimensions 750 x 350 mm, angular 1 centre tap hole, without overflow, valve without overflow always open Special feature: with special hidden drain, valve pre-assembled Further options / accessories: Surface refinement LCC (only white), without tap holes and overflow, 3 tap holes without overflow, 1 centre tap hole with hidden overflow, 3 tap holes with hidden overflow, bathtubs, shower trays, furniture, accessories Order no. 81233.2

Small washbasin undersurface ground LAUFEN LIVING CITY, sanitary, ceramic, EN 31, dimensions 450 x 380 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), without, tap holes, 1 tap hole without overflow, without tap holes and overflow, furniture Order no. 81543.3

Siphonic urinal LAUFEN CAPRINO PLUS, sanitary ceramic, electronic control, EN 13407, dimensions 320 x 350 x 645 mm, 1-l flush, water inlet concealed 1/2“, outlet horizontal or vertical, flushing, rate minimum 0,3 l/s, electronic control system for battery with all mounting accessories, 1-litre siphon with horizontal and vertical outlet DN 50 (standard, Europe, except CH and UK) and outlet DN 40 (standard CH), 2-litre, siphon with horizontal outlet DN 40 (standard UK), Special feature: Vacuum and performance tested, Further options: Surface refinement LCC (only white), with fly Order no. 84206.6

Washbasin undersurface ground LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 500 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, furniture Order no. 81743.2

Countertop basin LAUFEN PRO S, sanitary ceramic EN 31, dimensions 850 x 460 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, siphon cover, pedestal, towel rack, bathtubs, furniture Order no. 81396.5

Cutable countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 1000 x 460 mm, angular, basin right, 1 centre tap hole, Special feature: overflow channel glazed, cut one-sided to 700 - 980 mm, integreated shelf left, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, bespoke decoration, on ceramic shelf, towel rail 600 mm 89542.4 / 1000 mm 89542.6, furniture Order no. 81843.1

Countertop small washbasin KARTELL BY LAUFEN, SaphirKeramik EN 31, dimensions 460 x 460 mm, square 1 centre tap hole, without overflow, valve without overflow always open Special feature: with special hidden drain, valve pre-assembled Further options / accessories: Surface refinement LCC (only white), without tap holes and overflow, 3 tap holes without overflow, 1 centre tap hole with hidden overflow, 3 tap holes with hidden overflow, bathtubs, shower trays, furniture, accessories Order no. 81533.1

Countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 1000 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 2 tap holes distance 400 mm, 3 tap holes, without tap holes, 1 tap hole, without overflow, without tap holes and overflow, 3 tap holes distance, 8 inches, towel rail 89542.6, furniture Order no. 81843.7

Siphonic urinal LAUFEN CAPRINO PLUS, sanitary ceramic, EN 13407, dimensions 320 x 350 x 645 mm, 1-l flush, water inlet concealed 1/2“, outlet horizontal or vertical, flushing, rate minimum 0,3 l/s, Special feature: Vacuum and performance tested, Further options / accessories: Surface refinement LCC (only white), with fly, horizontal inlet connection, 1-litre siphon with horizontal outlet DN 50, (standard Europe, except CH and UK) and outlet DN 40 (standard CH), 2-litre siphon with horizontal outlet DN 40 (standard UK), 1-litre siphon, with horizontal and vertical outlet DN 50 SH 50 (standard Europe, except CH and UK) and outlet DN 40 SH 50 (standard CH), Order no. 84206.1

Washbasin undersurface ground LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 600 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, furniture Order no. 81743.4

Countertop basin LAUFEN LIVING SQUARE, sanitary ceramic, EN 31, dimensions 650 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, with or without overflow, 3 tap holes, distance 8 inches with overflow, towel rail 381432, furniture Order no. 81643.1

&quot;Countertop basin LAUFEN PRO S, sanitary ceramic EN 31, dimensions 850 x 460 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, siphon cover, pedestal, towel rack, bathtubs, furnitureOrder no. 81396.6

Washbasin undersurface ground LAUFEN PRO, sanitary ceramic, EN 31, dimensions 650 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, bathtubs, furniture Order no. 81795.3

Cutable countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1800 x 380/510 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 900 mm, integreated, shelves, with towel rail, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81270.8

Countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688 / EN 31, dimensions 900 x 380/510 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, integreated shelves, with towel rail, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, furniture, Order no. 81270.2

Semi recessed basin LAUFEN LIVING CITY, sanitary ceramic EN 31 dimensions 550 x 460 mm, symmetric 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, Order no. 81343.2

Cutable ceramic shelf LAUFEN LIVING SQUARE / PALACE, sanitary, ceramic, dimensions 900 x 380mm, max. load 50 kg, Special feature: cutable to 650 mm, Further options: Surface refinement LCC Order no. 87043.3

WC seat and cover Spezial LAUFEN PRO, Duroplast, removable, matching floorstanding WC pan, order no. 82195.6, 82195.7, 82195.8, 82195.9, 82295.1, 82495.5, 82495.6, 82495.7, 82495.8, 82495.9, 82595.5, 82595.6, 82595.7 and, wallhung WC pan, order no. 82095.0, 82095.1, 82095.2, 82095.3, 82095.4, 82095.5 Order no. 89195.0

Siphon cover LAUFEN PRO, sanitary ceramic, matching small washbasin order no. 81195.1, 81595.2, 81595.3, Further options: Surface refinement LCC (only white), Order no. 81995.2

Countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 500 x 460 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, towel rail 89542.2, furniture Order no. 81743.1

Siphon cover LAUFEN PRO, sanitary ceramic, matching washbasin order no. 81095.1, 81095.2, 81095.3, 81395.6, 81395.8, 81496.7, 81895.1, 81895.2, 81895.3, 81895.8, 81895.9, matching washbasin Compact, order no. 81495.1, 81495.2, Further options: Surface refinement LCC (only white) Order no. 81995.1

Wallhung WC pan washdown LAUFEN PRO, sanitary ceramic, for concealed cistern, EN 997, 6/3-l-flush, dimensions 360 x 560 x 350 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering 89195.1, 89395.3 Order no. 82095.5

Countertop basin LAUFEN PRO, sanitary ceramic, EN 31, dimensions 600 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, siphon cover, pedestal, bathtubs, furniture Order no. 81895.2

Washbasin undersurface ground LAUFEN PRO S, sanitary ceramic EN 31, dimensions 850 x 460 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, bathtubs, furniture Order no. 81696.5

Washbasin undersurface ground LAUFEN PRO S, sanitary ceramic EN 31, dimensions 1050 x 460 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, bathtubs, furniture Order no. 81696.6

Cutable countertop basin LAUFEN LIVING SQUARE, sanitary ceramic, EN 14688, dimensions 1800 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 1000 mm, with, towel rail cutable to 1765 mm, integreated shelves, Further options / accessories: Surface refinement LCC (only white), 2 or 3, tap holes, without tap holes, with or without overflow, hole for soap dispenser, left or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, towel rail 38143.5, furniture Order no. 81643.8

Cutable countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1200 x 380/510 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 900 mm, integreated, shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, or right, electronic valve unit to control water temperature and flow rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81170.4

Cutable countertop basin LAUFEN LIVING CITY, sanitary ceramic, EN 31, dimensions 1500 x 460 mm, angular, basin right, 1 centre tap hole, Special feature: overflow channel glazed, cut one-sided to 980 - 1480 mm, integreated shelf left, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, bespoke decoration, on ceramic shelf, towel rail 600 mm 89542.4 / 1000 mm 89542.6, furniture Order no. 81843.5

Cutable double countertop basin LAUFEN PALACE, sanitary ceramic, EN 14688, dimensions 1800 x 380/510 mm, symmetric, per basin 1 centre tap hole, Special feature: overflow channel glazed, cutable to 1350 mm, integreated, shelves, with towel rail, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, with or without overflow, hole for soap dispenser left, and right, electronic valve unit to control water temperature and flow, rate, 3 tap holes distance 8 inches with overflow, furniture Order no. 81470.8

Wallhung WC pan washout LAUFEN PRO, sanitary ceramic, for concealed cistern, EN 997, EN 33, 6/5-l-flush, dimensions 360 x 560 x 350 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering 89195.1, 89395.3 Order no. 82095.1

Drop in basin wall mounted LAUFEN LIVING SQUARE, sanitary ceramic, EN 31, dimensions 650 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, with or without overflow, 3 tap holes distance 8 inches with overflow, furniture Order no. 81643.2

WC seat and cover LIVING, Duroplast removable matching Wallhung WC pan, order no. 82043.5 Order no. 89243.3

Washbasin bowl LAUFEN LIVING SQUARE, SaphirKeramik EN 31 dimensions 360 x 360 mm, square without tap hole, without overflow Further options / accessories: Surface refinement LCC (only white), valve without overflow, furniture Order no. 81143.3

Compact countertop basin LAUFEN PRO, sanitary ceramic, EN 31, dimensions 600 x 380 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, siphon cover, pedestal, bathtubs, furniture Order no. 81895.9

Cutable countertop basin LAUFEN LIVING SQUARE, sanitary ceramic, EN 14688, dimensions 1300 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, cutable to 650 mm, with towel, rail cutable to 1260 mm, integreated shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, with or without overflow, hole for soap dispenser, left or right, electronic valve unit to control water temperature and, flow rate, 3 tap holes distance 8 inches with overflow, towel rail 38143.4, furniture Order no. 81643.5

Siphonic urinal LAUFEN CAPRINO PLUS, sanitary ceramic, electronic control, EN 13407, dimensions 320 x 350 x 645 mm, 1-l flush, water inlet concealed 1/2“, outlet horizontal or vertical, flushing, rate minimum 0,3 l/s, electronic control system 230 V with all mounting accessories, 1-litre, siphon with horizontal and vertical outlet DN 50 (standard Europe, except CH and UK) and outlet DN 40 (standard CH), 2-litre siphon with, horizontal outlet DN 40 (standard UK), Special feature: Vacuum and performance tested, Further options: Surface refinement LCC (only white), with fly Order no. 84206.5

The STUBI family features with 3 different sizes can form a very interesting lighting system. Very simple design, color and size variation, together with the LED source predetermined the features to design implementations in areas such as social or business representative. Type of installation: [LIST] Surface Suspended [/LIST]

Compact countertop basin LAUFEN PRO, sanitary ceramic, EN 31, dimensions 550 x 380 mm, , angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, siphon cover, pedestal, bathtubs, furniture Order no. 81895.8

Countertop basin LAUFEN PRO S, sanitary ceramic EN 31, dimensions 700 x 465 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white),3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, siphon cover, pedestal, bathtubs, furniture Order no. 81096.7

Double washbasin LAUFEN PRO N, sanitary ceramic EN 14688 dimensions 1250 x 420 mm, symmetric 1 centre tap hole Special feature: overflow channel glazed Further options: Surface refinement LCC, 2 tap holes, with overflow, 3 tap holes, with overflow, without tap hole Order no. 81095.9

Floorstanding WC pan washdown LAUFEN PRO N, sanitary ceramic, with cistern Dual-Flush (4,5/3-l-flush) EN 997, 4,5/3-l-flush, dimensions 360 x 650 x 450 mm outlet horizontal, VARIO vertical 70 - 250 mm back to wall, concealed fixation, 2 fixing holes Special feature: concealed surfaces directing water are fully glazed throughout, closed water rim, vacuum checked Further options / accessories: Surface refinement LCC, with shut-off valve option 781, WC seat and cover, 89095.2, WC seat and cover with automatic lowering 89095.3 Order no. 82795.2

Compact washbasin bowl undersurface ground LAUFEN PRO, sanitary ceramic, EN 31, dimensions 600 x 380 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, bathtubs, furniture Order no. 81295.3

Floorstanding WC pan washdown LAUFEN PRO, sanitary ceramic, for cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 700 x 480 mm, outlet horizontal, VARIO vertical 70 - 305 mm, back to wall, concealed fixation, lenght 700 mm, ceramic height 460 mm, 2 fixing holes, Special feature: concealed surfaces directing water are fully glazed, throughout, closed water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), 4 fixing holes, 2 fixing holes and lateral holes, cistern 82695.0, 82695.2, 82695.3, 82695.5, WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering, 89195.1, 89395.3, Order no. 82495.5

Floorstanding cistern Universal KARTELL BY LAUFEN, sanitary ceramic EN 14055, dimensions 400/410 x 140 x 980 mm Dual-Flush 5/3-l (4,5/3-l-flush) water inlet bottom left (1/2“) plastic matching floorstanding WC pan, order no. 82333.1 Special feature: water condensation insulation Further options: Surface refinement LCC (only white) Order no. 82866.3

Floorstanding bidet LAUFEN PRO, sanitary ceramic, EN 35, dimensions 360 x 580 x 400 mm, 1 centre tap hole, back to wall, concealed trap, concealed fixation, Special feature: overflow channel glazed, vacuum checked, Further options: Surface refinement LCC (only white), 3 tap holes Order no. 83295.1

Siphon cover LAUFEN PALACE, sanitary ceramic matching washbasin order no. 81070.1, 81070.2, 81070.3, 81070.4, 81070.8 Further options: Surface refinement LCC (only white) Order no. 81970.1

Washbasin LAUFEN PALACE, sanitary ceramic, EN 14688 / EN 31, dimensions 600 x 480 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without, overflow, siphon cover, pedestal, towel rail 38170.2, furniture Order no. 81070.2

Washbasin undersurface ground LAUFEN PRO S, sanitary ceramic EN 31, dimensions 550 x 465 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, bathtubs, furniture Order no. 81696.2

Washbasin LAUFEN PALACE, sanitary ceramic, EN 14688 / EN 31, dimensions 550 x 460 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without, overflow, siphon cover, pedestal, towel rail 38170.1, furniture Order no. 81070.1

Floorstanding WC pan washdown LAUFEN PRO, sanitary ceramic, for cistern, EN 997, EN 33, 4,5-l-flush, dimensions 360 x 700 x 420 mm, outlet horizontal, VARIO vertical 70 - 305 mm, back to wall, concealed fixation, lenght 700 mm, 2 fixing holes, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), 4 fixing holes, 2 fixing holes and lateral holes, cistern 82695.0, 82695.2, 82695.3, 82695.5, WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering, 89195.1, 89395.3, Order no. 82495.8

Floorstanding WC pan washout LAUFEN PRO, sanitary ceramic, for cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 670 x 420 mm outlet horizontal, VARIO vertical 70 - 350 mm concealed fixation Special feature: concealed surfaces directing water are fully glazed throughout, vacuum checked Further options / accessories: Surface refinement LCC (only white), cistern 82695.0, 82695.1, 82695.2, 82695.3, 82695.5, WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering 89195.1, 89395.3 Order no. 82495.9

Floorstanding WC pan washdown LAUFEN PRO, sanitary ceramic, for cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 670 x 420 mm, outlet horizontal, concealed fixation, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), cistern 82695.0, 82695.2, 82695.3, 82695.5, WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with, automatic lowering 89195.1, 89395.3 Order no. 82495.6

Floorstanding WC pan washdown LAUFEN PRO N, sanitary ceramic, with cistern Dual-Flush (4,5/3-l-flush) EN 997, 4,5/3-l-flush, dimensions 360 x 650 x 450 mm outlet horizontal, VARIO vertical 70 - 250 mm, back to wall Special feature: concealed surfaces directing water are fully glazed throughout, closed water rim, vacuum checked Further options / accessories: Surface refinement LCC, with shut-off valve option 781, WC seat and cover, 89095.2, WC seat and cover with automatic lowering 89095.3 Order no. 82795.3

Washbasin LAUFEN PALACE, sanitary ceramic, EN 14688 / EN 31, dimensions 650 x 480 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without, overflow, siphon cover, pedestal, towel rail 38170.3, furniture Order no. 81070.3

Cistern LAUFEN PRO, sanitary ceramic, dimensions 380 x 175 x 360 mm, Dual-Flush 6/3-l, water inlet bottom left (1/2“), matching floorstanding WC pan, order no. 82595.2/option 231, Special feature: water condensation insulation, Further options: Surface refinement LCC (only white), Australian Standard, option 263 Order no. 82995.3

Countertop basin LAUFEN PRO S, sanitary ceramic EN 31, dimensions 650 x 465 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white),3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, siphon cover, pedestal, bathtubs, furniture Order no. 81096.4

Cistern LAUFEN PALACE, sanitary ceramic, dimensions 360 x 160 x 420 mm, Dual-Flush 6/3-l, water inlet bottom left (1/2“), matching floorstanding WC pan, order no. 82470.6/option 231, Special feature: water condensation insulation, Further options: Surface refinement LCC (only white), Australian Standard, option 263 Order no. 82870.3

Wallhung WC pan washdown LAUFEN PRO, sanitary ceramic, for concealed cistern, EN 997, EN 33, 6/5-l-flush, dimensions 360 x 560 x 350 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering 89195.1, 89395.3 Order no. 82095.0

Countertop basin LAUFEN PRO S, sanitary ceramic EN 31, dimensions 600 x 465 mm, angular, 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white),3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, siphon cover, pedestal, bathtubs, furniture Order no. 810963

Pedestal LAUFEN PRO, sanitary ceramic, matching washbasin order no. 81095.1, 81095.2, 81095.3, 81395.6, 81395.8, 81496.7, 81895.1, 81895.2, 81895.3, 81895.8, 81895.9, matching washbasin Compact, order no. 81495.1, 81495.2, Further options: Surface refinement LCC (only white) Order no. 81995.0

Washbasin undersurface ground LAUFEN PRO S, sanitary ceramic EN 31, dimensions 700 x 465 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, bathtubs, furniture Order no. 81696.7

Washbasin undersurface ground LAUFEN PRO S, sanitary ceramic EN 31, dimensions 650 x 465 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, bathtubs, furniture Order no. 81696.4

Countertop basin LAUFEN PRO S, sanitary ceramic EN 31, dimensions 550 x 465 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white),3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, siphon cover, pedestal, bathtubs, furniture Order no. 81096.2

Floorstanding WC pan washdown LAUFEN PRO, sanitary ceramic, for concealed cistern, EN 997, EN 33, 6/5-l-flush, dimensions 360 x 580 x 400 mm, outlet horizontal, vertical 70 and 125 mm, back to wall, concealed fixation, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering 89195.1, 89395.3 Order no. 82295.1

Compact washbasin undersurface ground LAUFEN PRO, sanitary ceramic, EN 31, dimensions 550 x 380 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, bathtubs, furniture Order no. 81795.8

Floorstanding bidet LAUFEN PRO, sanitary ceramic, EN 35, dimensions 360 x 530 x 430 mm, 1 centre tap hole, back to wall, concealed fixation, Special feature: overflow channel glazed, vacuum checked, Further options: Surface refinement LCC (only white), 3 tap holes, Order no. 83295.2

Washbasin undersurface ground LAUFEN PRO S, sanitary ceramic EN 31, dimensions 600 x 465 mm, angular 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, without tap holes/ overflow and open drain, 1 tap hole/without overflow and open drain, 3 tap holes without overflow, bathtubs, furniture Order no. 81696.3

Floorstanding WC pan washdown LAUFEN PALACE, sanitary ceramic, for cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 700 x 475 mm, outlet horizontal, VARIO vertical 70 - 305 mm, back to wall, concealed trap, concealed fixation, Special feature: concealed surfaces directing water are fully glazed, throughout, closed water rim, vacuum checked, Further options / accessories: Surface refinement LCC (only white), lateral, holes, cistern 82870.0, 82870.2, 82870.3, 82870.5, WC seat and cover, 89170.0, WC seat and cover with automatic lowering 89170.1 Order no. 82470.6

Cistern LAUFEN PRO, sanitary ceramic, dimensions 380 x 175 x 360 mm, Dual-Flush 6/3-l, water inlet bottom left (1/2“), matching floorstanding WC pan, order no. 82495.5/option 231, 82495.6, 82495.7, 82495.8/option 231, 82495.9, Special feature: water condensation insulation, Further options: Surface refinement LCC (only white), Australian Standard, option 263 Order no. 82695.3

Compact wallhung WC pan washdown LAUFEN PRO, sanitary ceramic, for concealed cistern, EN 997, EN 33, 6/5-l-flush, dimensions 360 x 490 x 350 mm, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and cover with automatic lowering 89195.1, 89395.3 Order no. 82095.2

Washbasin LAUFEN PALACE, sanitary ceramic, EN 14688 / EN 31, dimensions 700 x 480 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap, holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without, overflow, siphon cover, pedestal, towel rail left 38170.7, towel rail right, 38170.8 furniture Order no. 81070.4

Floorstanding WC pan washdown LAUFEN PRO, sanitary ceramic, for cistern, EN 997, EN 33, 6/3-l-flush, dimensions 360 x 670 x 420 mm, outlet vertical 225 mm, concealed fixation, Special feature: concealed surfaces directing water are fully glazed, throughout, vacuum checked, Further options / accessories: Surface refinement LCC (only white), lateral, holes, cistern 82695.0, 82695.2, 82695.3, 82695.5, WC seat 89295.0, 89395.4, WC seat and cover, 89195.0, 89295.1, 89395.2, WC seat and, cover with automatic lowering 89195.1, 89395.3 Order no. 82495.7

Washbasin LAUFEN PRO, sanitary ceramic, EN 31, dimensions 600 x 480 mm, symmetric, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes/overflow and open drain, 1 tap hole/without, overflow and open drain, siphon cover, pedestal, bathtubs, furniture Order no. 81095.2

Siphon cover LAUFEN PALACE, sanitary ceramic, matching washbasin order no. 81070.1, 81070.2, 81070.3, 81070.4, 81070.8, Further options: Surface refinement LCC (only white) Order no. 81970.1

Compact washbasin bowl undersurface ground LAUFEN PRO, sanitary ceramic, EN 31, dimensions 550 x 380 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, bathtubs, furniture Order no. 81295.2

Countertop basin LAUFEN PRO, sanitary ceramic, EN 31, dimensions 650 x 480 mm, angular, 1 centre tap hole, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, without tap holes/overflow and open, drain, 1 tap hole/without overflow and open drain, siphon cover, pedestal, bathtubs, furniture Order no. 81895.3

Stainless Steel Hygiene Box in 6 l and 12l versions. Made of stainless steel, visible surfaces matt brushed. Optional mount on front for hygiene bags. Opening flap, steel wire holder for bin bags. Box made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Hygiene Boxes: Stainless Steel Hygiene Box 6l: 7754000 Format: 240 × 225 × 125 mm Weight: 1.96 Kg Stainless Steel Hygiene Box 12l: 7753000 Format 300 × 280 × 125 mm Weight: 3.22 Kg Waste bags: various waste bags in different sizes and colours

Air fragrance dispenser Paradise Stainless Steel Air Bar for 2 x 80-ml fragrance cartridges. Targeted scent release via blowers at the front. Duo-cartridge system enables an automatic change from active to reserve cartridge. Cartridge reach ca. 3 months (depending on setting). Intuitive user interface inside the dispenser for a room specific setting of the intensity with 4 levels. Dispenser reach approx. 12 m². Day-night control (light sensor) preserving resources. Service light at the front. Housing made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock . Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Air Bar: 7663000 Fragrances: CWS Sweet Orange: 630000, CWS Flower Rain: 631000, CWS Peach Heaven: 632000, CWS Ocean Fresh: 633000, CWS Summer Sense: 634000, CWS Forest Soul: 635000, CWS Silent Wood: 636000, CWS Secret Spa: 637000, CWS Magic Fruit: 638000

Paradise Air Bar air fragrance dispenser for 2 x 80-ml fragrance cartridges. Targeted scent release via blowers at the front. Duo-cartridge system enables an automatic change from active to reserve cartridge. Cartridge reach ca. 3 months (depending on setting). Intuitive user interface inside the dispenser for a room specific setting of the intensity with 4 levels. Dispenser reach approx. 12 m². Day-night control (light sensor) preserving resources. Service light at the front. Dispenser out of shock-resistant, anti-static plastic, with lock. Rounded edges, therefore no risk of injury. White panel can be changed to various colours. Complete incl. installation material, delivery and installation. Dispensers &amp; panels: Dispenser with panel white: 4663000, Dispenser without panel: 4663010 Panel active white: 161048000, Panel royal red: 161048022, Panel black pearl: 161048021, Panel navy blue: 161048044, Panel forest green : 191048045, Panel posh purple : 161048040, Panel silversense: 161048060 Fragrances: CWS Sweet Orange: 630000, CWS Flower Rain: 631000, CWS Peach Heaven: 632000, CWS Ocean Fresh: 633000, CWS Summer Sense: 634000, CWS Forest Soul: 635000, CWS Silent Wood: 636000, CWS Secret Spa: 637000, CWS Magic Fruit: 638000

With Elitfönster’s inward opening triple glazed window, you are offered a good insulation capability and efficient sound reduction giving you a good living comfort throughout the year. Exterior aluminium cladding for extra long durability making it virtually maintenance free. The freedom of choices and combinations is great. Window construction - Sidehung wooden window with an exterior aluminium cladding - Single sash with triple glazed isolation glass sealed unit - U value between 1,0 and 1,3 - Sound reduction between Rw 33 dB and Rw 41 dB - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Opening: sidehung or Kipp-Dreh* - Many possible combinations with opening and fixed windows in the same frame *Kipp-Dreh is a double-functioning fitting where the window is hung both on the side and at the bottom Please refer to Elitfönster&apos;s size matrixes for possible combinations with minimum and maximum constraints

With Elitfönster’s inward opening triple glazed patio door, you are offered a good insulation capability and efficient sound reduction giving you good living comfort throughout the year. Exterior aluminium cladding for extra long durability making it virtually maintenance free. Patio door construction - Sidehung wooden patio door with an exterior aluminium cladding - Single sash with a triple isolation glass sealed unit - U value between 1,0 and 1,3 - Sound reduction between Rw 33 dB and Rw 41 dB - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Opening: sidehung or Kipp-Dreh* * *Kipp-Dreh is a double-functioning fitting where the patio door is hung both on the side and at the bottom

Saniflow® push button hand dryers with cast iron cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 6,3 mm. cast iron cover with porcelain enamel is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

Part numbers: M14A-UL, M14ACS-UL &amp; M14AB-UL The dualflow© Plus M14 is a fast, energy efficient, ecologic, hygienic &amp; stylish hand dryer. It uses a high speed Class A universal motor to create an air stream of 233 mph that will dry your hands in ten seconds only. It’s elegant, easy maintenance designed and friendly-use. It’s very respectful with the environment thanks to its low power consumption (350 W in the ECO mode). The dualflow©plus is much more hygienic than alternatives owing to its 3-layer HEPA filter H13 and the Biocote© technology. The HEPA filter captures more than 99% of allergens in the air by filtering the air through a 30 mm thick 3 coat filter. The filter blocks at least 99.95% of particles than are 0.3 micron in size. The inclusion of the Biocote© technology inhibits the growth of the microrganisms odour causing and staining, keeping the unit clean and hygienic at all times. The dualflow©plus M14 provides a premium experience in every aspect. Very fast in drying terms (10-15 seconds), very quiet (only 62 dBA on the ECO setting) and respectful with the environment. It can be considered a truly money saver hand dryer owing its unique features that allows it to achieve savings of more than 57% compared to other “hands-in” dryers on the market. The dualflow©plus M14 is certified form third party by the North American Laboratory Underwriters Laboratories (UL) according with the USA Safety standard UL 499 and with the Canadian Standard CSA C22.2.

Part numbers: M06AC &amp; M06ACS The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available AISI 304 stainless steel and in two different types of finishes: bright or satin. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 90 and 180 Km/h, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: PP0006C &amp; PP0006CS The wall mounted sanitary napkin container with lid manufactured by Mediclinics has a capacity of 6 L and it is available in stainless steel AISI 304 bright or satin finish. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece. The lid protudes 3.5 mm from the body to facilitate the opening and it is fastened to the body by two shafts that they allows its rotation. It can be either free-standing or wall-mounted.

Part numbers: DJ0031, DJ0031C &amp; DJ0031CS Hand-operated liquid soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304 0.8 mm thick, to be installed directly on the wall. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.25 Kg these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 1.5 ml of soap per service. This anti-drip valve is easily interchangeable with the valves of the other soap dispensers of the same line, so you can easily turn this liquid soap dispenser into a foam or spray soap dispenser. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use liquid soaps or disinfectant gel soaps with a density between 0.9 and 1.35 kg/dm3 and a maximum viscosity of 3,000 cps.

Saniflow® automatic hand dryers with cast iron cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 6,3 mm. cast iron cover with porcelain enamel is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

Part numbers: M14A, M14ACS &amp; M14AB The dualflow© Plus M14 is a fast, energy efficient, ecologic, hygienic &amp; stylish hand dryer. It uses a high speed Class F universal motor to create an air stream of 410km/h that will dry your hands in ten seconds only. It’s elegant, easy maintenance designed and friendly-use. It’s very respectful with the environment thanks to its low power consumption (350 W in the ECO mode). The dualflow©plus is much more hygienic than alternatives owing to its 3-layer HEPA filter H13 and the Biocote© technology. The HEPA filter captures more than 99% of allergens in the air by filtering the air through a 30 mm thick 3 coat filter. The filter blocks at least 99.95% of particles than are 0.3 micron in size. The inclusion of the Biocote© technology inhibits the growth of the microrganisms odour causing and staining, keeping the unit clean and hygienic at all times. The M14 provides a premium experience in every aspect. Very fast in drying terms (10-15 seconds), very quiet (only 62 dBA on the ECO setting) and respectful with the environment. It can be considered a truly money saver hand dryer owing its unique features that allows it to achieve savings of more than 73% compared to other “hands-in” dryers on the market. The dualflow©plus M14 is certified from third party by the German Laboratory VDE according with the European Safety standards EN60335-1 &amp; EN60335-2-23 and with the European Electromagnetic Compatibility and repealing Directive 89/336/EEC.

Part numbers: M06AC-UL &amp; M06ACS-UL The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available AISI 304 stainless steel and in two different types of finishes: bright or satin. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 56 and 110 mph, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: M06A &amp; M06AB The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available steel and in two different types of finishes: white or black. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 90 and 180 Km/h, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: M06A-UL &amp; M06AB-UL The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available steel and in two different types of finishes: white or black. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 56 and 110 mph, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: PP0006 The wall mounted sanitary napkin container with lid manufactured by Mediclinics has a capacity of 6 L and it is available in steel white Epoxy finished. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece. The lid protudes 3.5 mm from the body to facilitate the opening and it is fastened to the body by two shafts that they allows its rotation. It can be either free-standing or wall-mounted.

Part numbers: M06AF-UL The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available steel and in cast iron white enameled cover. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 56 and 110 mph, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: BG0900CS Swing-up grab bar, 3 fixed positions with toilet paper roll holder hook, to install close to the toilet, manufactured by Mediclinics in aisi 304 stainless steel bar Ø 32 mm and 1,5 mm thick. Suitable for bathrooms specific for invalids, elderly people or the handicapped and to achieve barrier-free accessibility in bathrooms and public spaces. Model suitable for public use. Highest durability and rusting resistance thanks to its stainless steel AISI 304 manufacturing. The bending process guarantees the uniformity of the diameter along the bends. It incorporates a hook roller holder and a system to place the bar in 3 different positions. Steel mounting flange, 3 mm thick. Incorporates 6 countersunk screw holes of Ø6, 5 mm for mounting on the wall. Compatible with the installation of the Mediclinics’ grab bars BG0800… and BG0850…). Included screws for brick walls in stainless steel. The strength of the bar support will depend on the type of surface and the supports used. Block rubber at the end, to support the mounting plate. With optional kit to prevent electrical conductivity (KA0060).

Balconies with unique features for both the developer and residents: High-quality, cost-effective delivery process, longevity and minimal maintenance. Our balconies are scalable within depths from 1- to 3 meters and lengths up to 5.8 meters. Two rectangular balconies can be connected into an L-shape. The balconies can be combined with all railing models in Midthaug modular system. In this case the model Vinstra: Glass panels mounted in stainless steel holders to the inside of railings studs made of steel.

Balconies with unique features for both the developer and residents: High-quality, cost-effective delivery process, longevity and minimal maintenance. Our balconies are scalable within depths from 1- to 3 meters and lengths up to 5.8 meters. Two rectangular balconies can be connected into an L-shape. The balconies can be combined with all railing models in Midthaug modular system. In this case the model Glitra: Glass panels mounted in continuous aluminum profiles, attached to the inside of railings studs made of steel.

Balconies with unique features for both the developer and residents: High-quality, cost-effective delivery process, longevity and minimal maintenance. Our balconies are scalable within depths from 1- to 3 meters and lengths up to 5.8 meters. Two rectangular balconies can be connected into an L-shape. The balconies can be combined with all railing models in Midthaug modular system. In this case the model Orkla: Glass panels mounted in stainless steel clamps between railings studs made of steel.

Balconies with unique features for both the developer and residents: High-quality, cost-effective delivery process, longevity and minimal maintenance. Our balconies are scalable within depths from 1- to 3 meters and lengths up to 5.8 meters. Two rectangular balconies can be connected into an L-shape. The balconies can be combined with all railing models in Midthaug modular system. In this case the model Folla: Aluminium balustrades attached to the inside of railing studs made of steel.

Balconies with unique features for both the developer and residents: High-quality, cost-effective delivery process, longevity and minimal maintenance. Our balconies are scalable within depths from 1- to 3 meters and lengths up to 5.8 meters. Two rectangular balconies can be connected into an L-shape. The balconies can be combined with all railing models in Midthaug modular system. In this case the model Gaula: Steel balustrades attached between railing studs made of steel.