tileable Hebel wall finish, create for fence or partition

This bathtub object uses manufacturer specific information, much of which is typical for the US market. The hardware selection is generic, but heights are adjustable to coordinate with tile finishes etc. 3D detail set to "Simple" has a significant effect on the tub geometry, but not the hardware.

3D parametric, Ragnars X table, with\n- table shapes\n- table sizes\n- table heights\n- tabletop finishes\n- leg finishes

Inspired by the latest design trends, the Excellence collection brings you the widest combination of over 117 colours and wood designs for endless creativity. It is the all-inclusive solution for the comfort and resistance of any heavy traffic areas in education, aged care and offices. Acczent Excellence 80: the compact version for increased resistance to indentation. ■87 all-over colours and 30 wood decors fully adapted to age and setting ■Unique long-plank woods with new matt finish for authentic aspect (R10) ■New phthlate-free technology and total VOC emissions below 10µg/m3 ■Fully coordinated wall, stairs and accessibility accessories ■Best indentation measured value: 0.03mm ■Excellent resistance with TopClean XP surface treatment ■All decors also available in acoustic version (Tapiflex Excellence 65) ■Available in loose-lay version: Acczent Unik

Inspired by the latest design trends, the Excellence collection brings you the widest combination of over 117 colours and wood designs for endless creativity. It is the all-inclusive solution for the comfort and resistance of any heavy traffic areas in education, aged care and offices. Tapiflex Excellence 65: acoustic version for higher comfort and shock absorption. ■87 all-over colours and 30 wood decors fully adapted to age and setting ■Unique long-plank woods with new matt finish for authentic aspect (R10) ■New phthlate-free technology and total VOC emissions below 10µg/m3 ■Fully coordinated wall, stairs and accessibility accessories ■Good balance between indentation 0.06mm and sound reduction 19dB (best measured values) ■Excellent resistance with TopClean XP surface treatment ■All decors also available in compact version (Acczent Excellence 80) ■10 references available in tiles version: Tapiflex Tiles 65

Suspended plaster ceilings are usually made of plasterboard. In contrast, Metawell® jointless ceilings consist of aluminium sandwich panels, and because of the aluminium and copper used offer greater performance and a high response speed. The unusually lightweight support panel is very bending-resistant. Therefore, the grid dimension of the substructure can be double that of plasterboard panels. The advantages: greater flexibility with ceiling fixtures and a tighter meander layout. Metawell® panels offer many different edge finishes. They are provided at the butt joints with stop chamfers to ensure a perfectly levelled filling. Thanks to the extraordinarily flat surface, only the joints, not the entire panel area, need to be evened. Up to 110 W/sqm cooling performance (at 10 K under temperature). Additionally the product has an EPD (Environmental Product Declaration).

WITH A FEELING FOR DETAIL The Esencia task chair from Drabert is well-designed and thought-through down to the last detail. Each design choice is made to create both an appealing, flexible and functional chair. It is ideal both aesthetically and functionally in many different environments, either as a task chair or a meeting chair. As it is so user-friendly and has automatic weight detection, it is also ideal in the Kinnarps’ Next Office (Activity Based Working) concept, where the chair can be used by many different people. It is available in many exciting colours and fabric combinations. The back is upholstered with a durable 3D mesh that provides both great comfort and a beautiful finish. In terms of weight, Esencia is one of the lightest chairs on the market. It is also an eco-friendly option as it is possible to dismantle and recycle it.

Stylish brushed aluminum finish, for a trendy feel

Aluminum finish for upscale and image restrooms. Touch-free system: improved hygiene High capacity: less maintenance Long battery life: environmentally considerate

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Scala is a lightweight yet robust standard chair available in a number of different finishes. In its four-legged version, Scala is stackable, and with a five-star base and castors the chair’s sitting height is adjustable (gas spring). It comes with or wit

Andante is a range of furniture where the design of the back and sides calls to mind stick back chairs and classic seating. The armchair and sofas are comfortable to sit in, easy to get out of and at the same time attractive to look at from all directions. The rounded finish of the arm-/backrest is designed to be pleasant to the touch. The attractive meeting between Andante’s rounded armrest and the recessed, attractively curved front legs are examples of the detailed work carried out with huge feeling and craftsmanship. The seat and back cushions are filled with Bultex® polyether, a highly elastic cold foam known for its high quality and excellent comfort. The upholstery is easy to remove and wash. The side cushions are fastened in place using Velcro. The sofa has removable upholstery. Calico or rubberised fabric. Washable at 60°C. The Andante range also includes a 2-seat and 3-seat sofa. Supplied ready-assembled. Design: Marit Stigsdotter.

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

One-at-a-time dispensing for reduced consumption and increased hygiene Extra slim design – attractive and space-saving Top-up able feature ensures hand towels never run out Touch-free - touch only the towel you use Stylish brushed aluminum finish, for a

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. The bed has an adjustable bottom to suit various mattress thicknesses. The small metal foot at the bottom of Serena is an attractive detail intended to visually “lift” the furniture from the fl oor. Available with clear varnish, soap, oil or stain. Design: Marit Stigsdotter.

Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. The bed has an adjustable bottom to suit various mattress thicknesses. The small metal foot at the bottom of Serena is an attractive detail intended to visually “lift” the furniture from the fl oor. Available with clear varnish, soap, oil or stain. Design: Marit Stigsdotter.

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Scala is a lightweight yet robust standard chair available in a number of different finishes. In its four-legged version, Scala is stackable, and with a five-star base and castors the chair’s sitting height is adjustable (gas spring). It comes with or wit

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

The series’ modular design, different materials, and finishes enables it to be customised for different work cultures, office layouts and personalised solutions for every user. Use Series[e] storage units for spontaneous meetings, as seating furniture or

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Familiar design, familiar comfort. Jig is a stackable and highly versatile classic with a tubular steel frame. Comfortable back in moulded wood. Choose between an upholstered seat and back, or a wood finish. With armrests, the chair can also be hung on ta

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. Perfect for teacup, the book ... Easy to hang on and unhook. Compatible with Serena single and double bed. The Serena range also includes a chest of drawers, mirror, wardrobe and bedroom furniture. Design: Marit Stigsdotter.

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 2 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish. sledge-base.

Small Island L80 is a collapsable table with table top in birch ply with different finishes. The chromed steel frame is foldable. The Island range is available in different shapes, as tables or as upholstered benches. Use our design tool to configure your own Small Island! Use several Small Islands together to create different configurations where the shapes go in to each other. Design: Tomoyuki Matsuoka.

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. The bed has an adjustable bottom to suit various mattress thicknesses. The small metal foot at the bottom of Serena is an attractive detail intended to visually “lift” the furniture from the fl oor. Available with clear varnish, soap, oil or stain. Design: Marit Stigsdotter.

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

The series’ modular design, different materials, and finishes enables it to be customised for different work cultures, office layouts and personalised solutions for every user. Use Series[e] storage units for spontaneous meetings, as seating furniture or

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 4 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish.

The series’ modular design, different materials, and finishes enables it to be customised for different work cultures, office layouts and personalised solutions for every user. Use Series[e] storage units for spontaneous meetings, as seating furniture or

Andante is a range of furniture where the design of the back and sides calls to mind stick back chairs and classic seating. The armchair and sofas are comfortable to sit in, easy to get out of and at the same time attractive to look at from all directions. The rounded finish of the arm-/backrest is designed to be pleasant to the touch. The attractive meeting between Andante’s rounded armrest and the recessed, attractively curved front legs are examples of the detailed work carried out with huge feeling and craftsmanship. The seat and back cushions are filled with Bultex® polyether, a highly elastic cold foam known for its high quality and excellent comfort. The upholstery is easy to remove and wash. The side cushions are fastened in place using Velcro. The armchair has removable upholstery. Calico or rubberised fabric. Washable at 60°C. The Andante range also includes a 2-seat and 3-seat sofa. Supplied ready-assembled. Design: Marit Stigsdotter.

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. The bed has an adjustable bottom to suit various mattress thicknesses. The small metal foot at the bottom of Serena is an attractive detail intended to visually “lift” the furniture from the fl oor. Available with clear varnish, soap, oil or stain. Design: Marit Stigsdotter.

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

The StoFloor Public method 500 “Compact flooring” is a colored, sand coated floor system with a transparent epoxy finish. The system is solvent free and suited for high loads (e.g. forklifts, cars, etc...) Due to the epoxy’s chemical properties and the high amount of sand this system achieves very high impact, chemical, and UV resistance. Examples of application areas are workshops, warehouses, commercial kitchens, showrooms, exhibition spaces and industrial areas. The system is available in a wide range of colors. This BIM object is optimized for the northern European market. For additional information please contact Sto Scandinavia.

Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail finish and material quality. The bed has an adjustable bottom to suit various mattress thicknesses. The small metal foot at the bottom of Serena is an attractive detail intended to visually “lift” the furniture from the fl oor. Available with clear varnish, soap, oil or stain. Design: Marit Stigsdotter.

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Familiar design, familiar comfort. Jig is a stackable and highly versatile classic with a tubular steel frame. Comfortable back in moulded wood. Choose between an upholstered seat and back, or a wood finish. With armrests, the chair can also be hung on ta

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

A WORLD OF OPPORTUNITIES Series[e] is a multifunctional storage unit that can be used in most environments; for spontaneous meetings, as seating furniture, room dividers or sound absorbers. The series' modular design, different materials and finishes enab

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Serena means serene in Italian. It is therefore suitable as an overall name for the products in this range. The furniture in the Serena range has a simple, geometrical design with high detail finish and material quality. All items feature a metal foot, a detail intended to visually “lift” the furniture from the floor. The drawers are adjustable and self-closing, with anti-trapping device. All drawer fronts and drawer sides are made from solid birch.Design: Marit Stigsdotter.

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 2 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish. sledge-base.

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 2 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish. sledge-base.

The series’ modular design, different materials, and finishes enables it to be customised for different work cultures, office layouts and personalised solutions for every user. Use Series[e] storage units for spontaneous meetings, as seating furniture or

A floating meeting between tabletop and legs. Trippo (Ulla Christiansson, 2000) is available in heights 300, 400, 460, 530, 620 and 720 mm and no less than 42 tabletop sizes. Trippo tables can also be ordered in special sizes and other finishes. Some size

Ocean is a small table that has been designed to make our Ocean bench into an item of multifunctional furniture. A table that can function as a finish or as an intermediate part for the bench. Ocean can also be used as a versatile little sideboard in many different contexts. Available in natural lacquer, oil or stain. Design: Swedish Ninja/Maria Gustavsson.

Big Island L82 is a foldable table with table top in birch ply with different finishes. The chromed steel frame is foldable. The Island range; Small Island, Big Island and Long Island are available as tables or as upholstered benches. Design: Tomoyuki Matsuoka.

A successful, thriving family that keeps on growing. Needs exist and customers exist, so we’re adding new products to cater for additional requests and make the Dundra family as complete as possible. It all actually started with a sofa called Dunder 2010. A soft shape built up of cushions, covered buttons, extendable sections – it was friendly and inviting. Then we launched the first Dundra chair, bar stool and bar chair in 2011, and now we’re adding a stackable sofa, an armchair and a stackable stool. The series has also gained upholstered armrests that can be fitted to the sofa, easy chair, chair and bar chairs. Seven new family members. Welcome! Low table in solid stave-glued ash, black stained or natural lacquered finish. Steel frame in “green” chrome, Chrome III or black lacquered. Plastic feet.

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Andante is a range of furniture where the design of the back and sides calls to mind stick back chairs and classic seating. The armchair and sofas are comfortable to sit in, easy to get out of and at the same time attractive to look at from all directions. The rounded finish of the arm-/backrest is designed to be pleasant to the touch. The attractive meeting between Andante’s rounded armrest and the recessed, attractively curved front legs are examples of the detailed work carried out with huge feeling and craftsmanship. The seat and back cushions are filled with Bultex® polyether, a highly elastic cold foam known for its high quality and excellent comfort. The upholstery is easy to remove and wash. The side cushions are fastened in place using Velcro. The sofa has removable upholstery. Calico or rubberised fabric. Washable at 60°C. The Andante range also includes a 2-seat and 3-seat sofa. Supplied ready-assembled. Design: Marit Stigsdotter.

Deciso was designed with the Scandinavian design tradition very much in mind. It is adapted for modern leadership and then enhanced with an international touch. What gives Deciso its strong character is the high finish, the underframe’s D-profile and the

Suitable for offices, lounges, homes etc. it makes the perfect complement to the easy chair and sofa. nformation Frame of 19 mm powder coated or chromium plated steel tubing. Top of 19 mm plywood with beech, birch or oak veneer. Alternatively stained birch veneer. Weight: Ø50: 6,5 kg Ø80: 10,5 kg 80x80: 12,5 kg Features & Benefits F Steel tubing frame. B Dramatic simplicity. F Round or square. B Straightforward design solutions. F Variety of finishes & colors. B Planning possibilities. F Design continuity with Cinema seating. B Fits home or office.

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Electronically controlled mixer with LED. Mora Armatur’s kitchen mixer, Mora Styxx, explodes the limits of kitchen units as we know them. It isn’t just the electronic control panel, the LED light, the exceptional finish and the state-of-the-art visual design that are guaranteed to impress. With Mora Styxx, you regulate the temperature, the water pressure and the water jet with one hand, leaving the other hand free to wash dishes, cook or care for your children.

Oberon is our new profound table range. Where we have infused our view of good and intelligent design. The tables are just as ergonomic, flexible and functional as they are appealing to the eye. They have a stylish finish based on Scandinavian values. Sle

Pladur® Sound Conditioning Solution. Pladur® FON+, Suspended Ceiling formed by a simple or double (primary and secondary) structure of galvanised steel sheet profiles, based on Pladur® T-60 Profiles, properly suspended from the ceiling structure with Pladur® hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. Pladur® FON+ Boards are then screwed to the simple or secondary structure. Proportional part of the Pladur® materials: screws, compounds, joint tapes, resilient tape, etc, totally finished with a Level 3 (Q3) Quality Finish. Mineral Wool may also be used (without vapour barrier or Kraft paper) on the reverse side of the boards and profiles. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Ceiling, formed by a structure of galvanised steel sheet profiles, based on Pladur® Furring Channels anchored directly to the base wall, with one or more Pladur® boards screwed to the external side. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Sound Conditioning Solution. Pladur® FON+, Suspended Ceiling formed by a simple or double (primary and secondary) structure of galvanised steel sheet profiles, based on Pladur® T-60 Profiles, properly suspended from the ceiling structure with Pladur® hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. Pladur® FON+ Boards are then screwed to the simple or secondary structure. Proportional part of the Pladur® materials: screws, compounds, joint tapes, resilient tape, etc, totally finished with a Level 3 (Q3) Quality Finish. Mineral Wool may also be used (without vapour barrier or Kraft paper) on the reverse side of the boards and profiles. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Full body porcelain tile, stony style, three finishes, four colors and two diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. Complementary tactile slabs in six colors and two finishes. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Full body porcelain tile, cement style, two finishes, six colors and six diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Wall Lining, formed by a structure of galvanised steel sheet profiles formed by Pladur® Furring Channels attached directly to the base wall, with one or more PLADUR® boards screwed to the wall’s external face. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape, etc. totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Full body porcelain tile, cement style, three finishes, six colors and seven diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Porcelain non-rectified tile, five colors and antislip finish for exterior and heavy traffic applications. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Wall Lining, formed by a structure of galvanised steel sheet profiles formed by Pladur® Furring Channels attached directly to the base wall, with one or more PLADUR® boards screwed to the wall’s external face. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape, etc. totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Direct Bond Wall Lining, formed by a Pladur® board attached directly to the supporting wall using clumps of Pladur® Bonding Compound laid every 400 mm in both directions. Proportional part of the Pladur® materials: compound, joint tape, bonding compound, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Porcelain tile, cement style, two finishes, four colors and six diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Direct Bond Wall Lining, formed by a Pladur® board attached directly to the supporting wall using clumps of Pladur® Bonding Compound laid every 400 mm in both directions. Proportional part of the Pladur® materials: compound, joint tape, bonding compound, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Porcelain non-rectified tile, three colors and antislip finish for exterior and heavy traffic applications. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Full body porcelain tile in 3,5 and 5,6 mm thick. The largest slab is 1000x3000 mm, twenty seven colors, two finishes and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Ceiling, formed by a structure of galvanised steel sheet profiles, based on Pladur® Furring Channels anchored directly to the base wall, with one or more Pladur® boards screwed to the external side. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Full body porcelain tile, cement style, three finishes, six colors and seven diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, stony style, three finishes, five colors and eight diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Loungechair, solid wood frame. Fully upholstered seat and back. Wooden arms. No buttons on the outside of the back. EUFORIA, a complete collection of chair, armchair, barstool and easychair, Euforia is the height of harmony and elegance. An abundance of curves provide an excellent level of comfort and a modern rethinking of classical style. Materials are upholstered directly onto the frame, which features a snug back. Finishes are either standard or as required by customer. Upholstered in standard or customer’s own mate.

Barstool, solid wood frame. Outside of back in plywood. Upholstered seat and back with piping details on bottom of seat and back. The CHARME collection is a synchronization of curves linking wood and elegant upholstery. A complete lineup of seating suitable for furnishing hotels and communities. Elegant in its presentation and pleasurable in its comfort. The upholstery is applied directly on to the frame and available in fabric or leather. The finishes are standard or to customer’s requirement.

Sidechair, solid wood frame. Outside of back in plywood. Upholstered seat and back with piping details on bottom of seat and back. The CHARME collection is a synchronization of curves linking wood and elegant upholstery. A complete lineup of seating suitable for furnishing hotels and communities. Elegant in its presentation and pleasurable in its comfort. The upholstery is applied directly on to the frame and available in fabric or leather. The finishes are standard or to customer’s requirement.

2 drawers nightstand, made in solid wood, perfect combination of art deco style. Available in various finishes reaches its maximum beauty with bright finishes, embellished with gold and silver leaves

comfortable and elegant armchair, particularly suited to large-size tables, enveloping and refined. Made of solid wood, it comes in a variety of finishes and elegant fabrics. Distinctive element of this articles, legs carved by hand by master craftsmen.

LINEAR is a complete program of modular benches proposed in two different heights. Its clean lines make it easy to combine with most of Montbel’s collections. Upholstered directly onto the frame, the back is very comfortable. Both standard and customer’s own finishes are feasible. Upholstery in standard, customer’s own materials or leather.

stately padded bed, available in a wide range of sizes. Completely customizable both in the choice of upholstery fabric in both finishes to embellish the carved feet and the fine carving on the head

Armchair, solid wood frame. Upholstered seat. Stackable. The great success of LOGICA chair is based on the diversity of its range. Chair, armchair (both stackable) and barstools are offered in three different back styles. The structure is in beech wood; finishes are standard or custom-made.

Sideboard 2 doors and three drawers, enriched by elegant reliefs, ideal for those who love the practicality of sliding doors without sacrificing the elegance and sophistication. Made entirely in solid wood, it is available in a wide range of finishes, all customizable

Barstool, solid wood frame. Fully upholstered seat and back. Footrest in chrome. Buttons on the outside of the back. EUFORIA, a complete collection of chair, armchair, barstool and easychair, Euforia is the height of harmony and elegance. An abundance of curves provide an excellent level of comfort and a modern rethinking of classical style. Materials are upholstered directly onto the frame, which features a snug back. Finishes are either standard or as required by customer. Upholstered in standard or customer’s own mate.

Sidechair, solid wood frame. Fully upholstered seat and back. Buttons on the outside of the back. EUFORIA, a complete collection of chair, armchair, barstool and easychair, Euforia is the height of harmony and elegance. An abundance of curves provide an excellent level of comfort and a modern rethinking of classical style. Materials are upholstered directly onto the frame, which features a snug back. Finishes are either standard or as required by customer. Upholstered in standard or customer’s own mate.

Lounge chair, solid wood frame. Outside of back in plywood. Upholstered seat and back with piping details on bottom of seat and back. The CHARME collection is a synchronization of curves linking wood and elegant upholstery. A complete lineup of seating suitable for furnishing hotels and communities. Elegant in its presentation and pleasurable in its comfort. The upholstery is applied directly on to the frame and available in fabric or leather. The finishes are standard or to customer’s requirement.

LINEAR is a complete program of modular benches proposed in two different heights. Its clean lines make it easy to combine with most of Montbel’s collections. Upholstered directly onto the frame, the back is very comfortable. Both standard and customer’s own finishes are feasible. Upholstery in standard, customer’s own materials or leather.

Round coffee table with precious details handmade: the carvings can be finished with original gold leaf, which enhances the beauty and sophistication of the line. Available in a wide range of finishes, all current

This original oval fixed table, with its double base, is the ideal solution for decorate elegant living spaces. It is supplied in a wide range of finishes, all made by hand. the carvings can be enriched by gold and silver leaves

Glass cabinet 2 doors with sinuous curved lines, are created with dedication and perfectly combines glass with the beauty of cherry wood. Contemporary in finishes laquered, more classic and elegant in wooden finishes

Chair, Made of solid wood, available in a wide range of finishes and elegant fabrics. Distinctive element of this articles, legs carved by hand by master craftsmen and an original wood curving applied on the back.

Easychair, solid wood frame. Fully upholstered seat and back. Webbed seat. Upholstered arms. No buttons on the outside of the back. EUFORIA, a complete collection of chair, armchair, barstool and easychair, Euforia is the height of harmony and elegance. An abundance of curves provide an excellent level of comfort and a modern rethinking of classical style. Materials are upholstered directly onto the frame, which features a snug back. Finishes are either standard or as required by customer. Upholstered in standard or customer’s own mate.

Sofa, solid wood frame. Outside of back in plywood. Upholstered seat and back with piping details on bottom of seat and back. The CHARME collection is a synchronization of curves linking wood and elegant upholstery. A complete lineup of seating suitable for furnishing hotels and communities. Elegant in its presentation and pleasurable in its comfort. The upholstery is applied directly on to the frame and available in fabric or leather. The finishes are standard or to customer’s requirement.

Products for the bathroom are designed specifically with safety mind and to maximize usability. Folding seat with nylon slats made of seamless stainless steel AISI 304 with polished finish.

Nightstand with 3 curved drawers complete of metal runners total removable. Made of solid wood is available in a wide range of finishes and can be fully customized

This glass cabinet with two doors is one of vast selection of perfected products to create your very own style. the glass shelves make it bright and elegant, ideal for enhancing the finest dining rooms.Available in a wide range of finishes, the backrest can be made with mirror or covered with elegant fabrics and refined, for a touch more classic

Beautiful chair, great example of Italian elegance and comfort. Made of solid wood, it comes in a variety of finishes and elegant fabrics. Distinctive element of this articles, legs carved by hand by master craftsmen.

Sidechair, solid wood frame. Upholstered seat. Stackable. The great success of LOGICA chair is based on the diversity of its range. Chair, armchair (both stackable) and barstools are offered in three different back styles. The structure is in beech wood; finishes are standard or custom-made.

Cembrit Cembonit A strong, weather-proof cladding sheet characterised by its muted, matt finish. During manufacturing, the through-coloured sheet receives a unique surface treatment which makes it powerfully resistant towards water staining and dirt, ensuring a long-lasting and durable facade. Cembrit Cembonit comes in 11 subtle colours. The natural authenticity of Cembrit Cembonit is expressed through the slight colour variations in the surface, imbuing your facade with the play of light and nuances you associate with any natural building material. Over time, these natural variations may develop further as the surface patinates. [LIST] 901 Pearl 911 Sand 915 Tufa 921 Flint 922 Graphite 935 Ruby 941 Magma 942 Ruby 946 Adobe 951 Emerald 967 Granite [/LIST]

The 110 diameter Punkt Lamp will be the perfect finish in most premises. It is available for many different lamp types, ensuring maximum flexibility. The new version with LED offers a very high output ratio, and it wins on all applications due to its supe

Vahle delivers solid wooden doors with the possibility of great architectural freedom. Doors are made specifically for each project, ie with over-height, solid, veneered or lacquered finish, concealed hinges, and fire and sound requirements. Our flush doo

A P5 grade enhanced moisture resistant structural flooring board with permanent dual surface protection. Covered by the EGGER Advanced Lifetime Guarantee if fitted correctly. Can be installed in light rain conditions Fully sealed surface protects on site for up to 42 days Decorative oak effect surface finish Available with peel off film upon request Available in 18 and 22 mm thicknesses – check loading requirements before specification

UNDA is a lighting system combining two types of individual light fixtures. Combining these types a wide range of three-dimensional configurations of different shapes may be arranged (circle, wave, etc.). Both types of modules different in their horizontally eased edges are made from a bent aluminium profile complemented by diffusers with a high permeability of light and fitted with LED lights. Frames are available in white, black or silver colour with a structured finish. Renowned Dutch architect and designer Rob van Beek designed these lights. Type of installation: [LIST] Suspended [/LIST]

Coverbox Paradise Stainless Steel Ladycare Box for use in a CWS Ladycare Box. Optionaly also used as a Paper Bin. Coverbox made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Ladycare Box: Stainless Steel Ladycare Box: 7776000 Paradise Ladycare Lid Black: 577200

Paradise Stainless Steel Superroll jumbo toilet roll paper dispenser for 380 m jumbo rolls. Changeover to 4 small toilet paper rolls possible. Window for checking filling level. Roll brake and cylinder lock prevent abuse and theft. Serrated edges with blunt teeth help avoid injuries. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Superroll: 7630000 Roll Rotary spray (optional): 307630000; Weight: 1.14 Kg Toilet paper: various toilet paper types in different qualities

Hygiene bag holder, can be mounted separately on the wall or stuck to the hygiene box. Made of stainless steel, visible surfaces matt brushe. For hygiene bags out of plastic or paper. Holder made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Hygiene Bag Holders: Stainless Steel Bag Holder (plastic bag): 7756000 Format: 95 × 130 × 20 mm Weight: 0.28 Kg Stainless Steel Bag Holder (paper bag): 7755000 Format: 113,5 × 205 × 32 mm Weight: 0.60 Kg Hygiene bags: hygiene bags in paper and plastic

Paper Bins Paradise Stainless Steel Paper Bin in 25, 40 l, and 60 l. Made of stainless steel, visible surfaces matt brushed, optionally available with automatically closing lid or opening frame and wall mount. Mount for bin bag is preinstalled. Box made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Paper Bins: Stainless Steel Paper Bin 25l: 7752000, Weight: 4.19 Kg Stainless Steel Paper Bin 25l Lid: 307752000, Weight: 0.9 Kg Stainless Steel Paper Bin 25l Coverage: 307752100, Weight: 0.9 Kg Format: 450 × 300 × 200 mm Stainless Steel Paper Bin 40l: 7751000, Weight: 6.0 Kg Stainless Steel Paper Bin 40l Lid: 307751000, Weight: 0.9 Kg Stainless Steel Paper Bin 40l Coverage: 307751100, Weight: 0.9 Kg Format: 550 × 335 × 230 mm Stainless Steel Paper Bin 60l: 7750000, Weight: 6.5 Kg Stainless Steel Paper Bin 60l Lid: 307750000, Weight: 0.9 Kg Stainless Steel Paper Bin 60l Coverage: 307750100, Weight: 0.9 Kg Format: 740 × 350 × 250 mm Waste bags: various waste bags in different sizes and colours

Stainless Steel Hygiene Box in 6 l and 12l versions. Made of stainless steel, visible surfaces matt brushed. Optional mount on front for hygiene bags. Opening flap, steel wire holder for bin bags. Box made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Hygiene Boxes: Stainless Steel Hygiene Box 6l: 7754000 Format: 240 × 225 × 125 mm Weight: 1.96 Kg Stainless Steel Hygiene Box 12l: 7753000 Format 300 × 280 × 125 mm Weight: 3.22 Kg Waste bags: various waste bags in different sizes and colours

Paradise Stainless Steel Paper Slim folded paper dispenser for approx. 300 folded papers. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock (resp. push button). Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Paper Slim: 7622000 Folded paper: various paper types in different qualities and colours

Paradise Stainless Steel Antibact Slim foam soap dispenser for 500 ml of antibact preparation for decontaminating hand washing (subject to the 30-second working time and recommended dosage). "Easy cleaning" and "Click-in-Bottle" systems guarantee rapid and clean replacement of the cartridges. No dripping thanks to recirculation pump. Foam generator with integrated reserve tank (approx. 80 portions) generates approx. 660 portions of foam soap. Upside-down cartridge ensures product is completely consumed. Simple single-handed operation. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Antibact Slim: 7022000 Foam soap 500ml: Antibact: 5485000

Paradise Stainless Steel Foam Universal foam soap dispenser for 1000 ml of soap concentrate. "Easy cleaning" and "Click-in-Bottle" systems guarantee rapid and clean replacement of the cartridges. No dripping thanks to recirculation pump. Foam generator with integrated reserve tank (approx. 160 portions) generates approx. 2,500 portions of foam soap. Upside-down cartridge ensures product is completely consumed. Simple single-handed operation. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Foam Universal: 7011000 Foam soap 1.000ml: Mild: 5471000, Neutral: 5474000, Standard: 5470000

Air fragrance dispenser Paradise Stainless Steel Air Bar for 2 x 80-ml fragrance cartridges. Targeted scent release via blowers at the front. Duo-cartridge system enables an automatic change from active to reserve cartridge. Cartridge reach ca. 3 months (depending on setting). Intuitive user interface inside the dispenser for a room specific setting of the intensity with 4 levels. Dispenser reach approx. 12 m². Day-night control (light sensor) preserving resources. Service light at the front. Housing made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock . Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Air Bar: 7663000 Fragrances: CWS Sweet Orange: 630000, CWS Flower Rain: 631000, CWS Peach Heaven: 632000, CWS Ocean Fresh: 633000, CWS Summer Sense: 634000, CWS Forest Soul: 635000, CWS Silent Wood: 636000, CWS Secret Spa: 637000, CWS Magic Fruit: 638000

Paradise Stainless Steel Cream Slim cream soap dispenser for 500 ml of soap cream. "Easy cleaning" and "Click-in-Bottle" systems guarantee rapid and clean replacement of the cartridges. No dripping thanks to recirculation pump. Soap pump with integrated reserve tank (approx. 160 portions) generates approx. 800 portions of cream soap. Upside-down cartridge ensures product is completely consumed. Simple single-handed operation. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Cream Slim: 7002000 Cream soap 500ml: Mild: 5467000, Neutral: 5464000, Standard: 5463000

Paradise Stainless Steel Paperroll roll paper hand towel dispenser for 100 m of paper roll, 22 cm wide. Paper can be removed in sections measuring approx. 25 cm (easy pull-out). Automatic cutting system with protective cover to prevent injury. Next section fed to within reach. "Easy-Loading" system for quick filling. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Paperroll: 7205000 Roll paper: white, 100m, 3-ply: 288001, blue, 100m, 3-ply: 289000

Paradise Stainless Steel Dry Slim cotton towel dispensers for a cotton hand towel roll measuring 35 × 0.21 m with automatic feed-in of the used towel and the roll end (retraction system), time interval of retraction can be set (6, 12, 16, 20 seconds). The 2-chamber system guarantees hygienic separation of the fresh and used single-use cotton towel. Rapid and simple filling with the "Easy-Loading" system, dispenser with integrated fill-level display. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation, without cotton towel roll (available to rent on subscription). Dispenser: Stainless Steel Dry Slim: 7502000 Cotton towel rolls: Slim white: 153000, Slim blue: 154000

Paradise Stainless Steel Cream Universal cream soap dispenser for 1000 ml of soap cream. "Easy cleaning" and "Click-in-Bottle" systems guarantee rapid and clean replacement of the cartridges. No dripping thanks to recirculation pump. Soap pump with integrated reserve tank (approx. 160 portions) generates approx. 1,600 portions of cream soap. Upside-down cartridge ensures product is completely consumed. Simple single-handed operation. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Cream Universal: 7001000 Cream soap 1.000ml: Mild: 5457000, Neutral: 5454000, Standard: 5453000

Paradise Stainless Steel Foam Slim foam soap dispenser for 500 ml of soap concentrate. "Easy cleaning" and "Click-in-Bottle" systems guarantee rapid and clean replacement of the cartridges. No dripping thanks to recirculation pump. Foam generator with integrated reserve tank (approx. 160 portions) generates approx. 1,250 portions of foam soap. Upside-down cartridge ensures product is completely consumed. Simple single-handed operation. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Foam Slim: 7012000 Foam soap 500ml: Mild: 5481000, Neutral: 5484000, Standard: 5480000

Paradise Stainless Steel Seatcleaner toilet seat cleaner dispenser for toilet seat disinfection. Drip-free pump system for use of cleaning liquids in 300 ml plastic pouches with patented "Clean-Click" lock. Dosing pump outputs approx. 1,500 portions as spray. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints, with lock (resp. push button). Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Seatcleaner: 7567000 Seatcleaner liquid 300ml: Disinfection: 597000

Paradise Stainless Steel Toiletpaper toilet paper dispenser for two standard-sized rolls with locking mechanism (only releases reserve roll when the first roll has been completely used up) and brake for sparing use. Grey plastic roll cover. Glass-fibre-reinforced rear wall. Housing including rear wall made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Dispenser: Stainless Steel Toiletpaper: 7604000 Toilet paper: various toilet paper types in different qualities

Riff is a lightweight, durable chair offering good seating comfort. The back and seat are made of moulded wood. The seat is available with or without upholstery. Riff is now also available with black, white, red, green or blue laminate as an alternative to the wood finishes (beech, birch and oak). The chair is equipped with glides and stands stable on all surfaces. Riff can be either stacked (6 chairs) or hung on the edge of a table. All details can be recycled.

Riff is a lightweight, durable chair offering good seating comfort. The back and seat are made of moulded wood. The seat is available with or without upholstery. Riff is now also available with black, white, red, green or blue laminate as an alternative to the wood finishes (beech, birch and oak). The chair is equipped with glides and stands stable on all surfaces. Riff can be either stacked (6 chairs) or hung on the edge of a table. All details can be recycled.

The Mediclinics’ open bins models are designed for a medium traffic washrooms and they have a capacity of 25 L. They are a perfect solution for gymnasiums, sports centers, hospitals, health centers and similar type of installations. The solutions provided by this category are available in AISI 304 stainless steel bright or satin finish. Highly resistant solutions for medium traffic, with anti-vandalism features; the body is made of a solid piece and can be either free-standing or wall-mounted. They have an inner swinging plastic ring in black PP for bag holder.

Part numbers: BG0800C & BG0800CS Swing up grab bar with toilet roll holder hook, manufactured by Mediclinics in aisi 304 stainless steel bar Ø 32 mm and 1,5 mm thick. Mediclinics offers these products for the purpose of improving the quality of life of people with reduced mobility. State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright or a satin finish. The rotating point of this grab bar is strengthened with a double tube for a maximum resistance. A safety system that blocks the bar in the vertical position prevents its accidental dropping. Stainless steel screws and plastic plugs to install the grab bar to the wall are provided.

Stainless steel Toilet paper dispenser with Ø275mm industrial paper roll, bright or satin finish. Mediclinics toilet paper dispensers provide a solution for heavy duty paper rolls. The product line is designed to equip any public washroom, offering different products that adapt to the different needs of the washroom that is to be equipped. These models are designed for high traffic washrooms that experience a large influx of people. The solutions provided by this category are available in two different finishes: bright AISI 304 stainless steel and satin AISI 304 stainless steel. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and they have a Mediclinics standard safety lock with a key, which is provided with the product. Also, all of them incorporate a slot on the front of the model to allow viewing the amount of paper remaining and they have an AISI 304 stainless steel axis with inertia brake to optimize the dispensing of the paper.

Optima sensor operated hand dryers from Mediclinics are a suitable solution for those looking for an auto hand dryer with an optimum performance at a very competitive price. These models are ideal to be installed in washrooms with an average traffic of people like for example, restaurants, theatres, offices, etc. Sensor operated models, equipped with an induction motor, which do not require any maintenance. Manufactured using the highest quality materials, they also include an optical reader for hand distance detection, which is adjustable. In order to better blend with the washroom’s decoration, it is available in steel white Epoxy finish. Thanks to R&D&I, Mediclinics manufactur a dryer with a smooth design, which is made using a highly robust material, with anti-vandalism features. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: M02AC-UL & M02ACS-UL With important success, SANIFLOW has developed THE FIRST INTELLIGENT HAND DRYER thanks to a new hand drying system called “Logic Dry”, which selects fully automatically for each drying cycle the heating-capacity required for optimal airflow temperature, representing an advance in the design and features of hand dryers for public washrooms. Additionally, they are equipped with new electronic and anti-vandalism protection systems, which make them the most secure dryers of their category. These Serie boast the legendary SANFILOW airflow – over 315 CFM per hour plus fully automatic operation, precision design and efficiency, reducing the noise level to the minimum of the market on its category. Available in AISI 304 stainless steel, 1,5 mm thick, bright or satin finish, it represents a stylish choice.

Part numbers: M09AC & M09ACS The line of Machflow® stainless steel sensor operated hand dryers provides important energy savings and an ultra-fast drying. Solutions with an avant-garde design and with two different finishes so that the dryers can easily blend in with the decoration. Its main advantages include: - energy savings (1.9 Watts per drying cycle) - ultra-fast drying time. Dries hands in record speed, between 8 and 12 seconds) - caring for the environment. The Machflow® family consumes an average of 237 Kg of CO2, which represents a 53% annual carbon print reduction) - minimum noise pollution (between 68 and 75 dB) The cover of this hand dryers is manufactured in stainless steel AISI 304, 1.5 mm thick and it is available in two finishes (bright and satin). With a maximum air speed of 325 Km/h, the Machflow Mediclinics’ hand dryers stands out in the fast drying sector, while complying with the most important international quality and safety certifications; its anti-vandalism features make it suitable for use at facilities with a high traffic of people.

Part numbers: M04A, M04AC & M04ACS The economic line of Smartflow® hand dryers is one of the most compact in the market, designed for locations that because of their size require small sized washroom accessories that meet two requirements: low consumption and optimum hand drying. These units are automatic dryers that offer an optimum relationship between functionality and price. Because of its features and design, this economic line is intended to be installed in areas with a large trafic of people like for example medium sized restaurants, cafeterias or the offices of a small or medium sized company. Three models with different finishes are available: white, bright and satin. All of them with an ABS resistant cover and electronic detection sensor by infrared beam with adjustable distance detection, that allows a better adaptability to different types of washrooms. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: PR0789 These models are designed and manufactured by Mediclinics in steel 0.8 mm thick and they are available in white epoxy finish. They have been thought to be used in restaurants, offices, hospitals, etc. and provide value added to the design. All of these are capable of holding 3 standard toilet paper rolls or a Ø275mm industrial paper roll. The 3 standard toilet paper rolls option, includes an automatic mechanism, based in a revolvering mechanism, which causes the next roll to drop once the bottom roll has been used. Ø275mm industrial paper roll option has an axis with anti-spin brake by inertia, to ensure a more rational use of the paper. With anti-vandalism features, all of these include a special key for opening the casing.

Part numbers: PP0006C & PP0006CS The wall mounted sanitary napkin container with lid manufactured by Mediclinics has a capacity of 6 L and it is available in stainless steel AISI 304 bright or satin finish. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece. The lid protudes 3.5 mm from the body to facilitate the opening and it is fastened to the body by two shafts that they allows its rotation. It can be either free-standing or wall-mounted.

The MEDIFLOW® Series of hand dryers was designed & developed with ergonomic principles in mind, focusing on functionality, safety and anti-vandalism. These Serie boast the legendary SANFILOW airflow – over 315 CFM per hour plus fully automatic operation, precision design and efficiency, reducing the noise level to the minimum of the market on its category. The cover of these hand dryers is made in steel, 1.5 thick and it is available in white epoxy finish. It represents a stylish choice.

Part numbers: SN0027C, SN0031C, SN0036C, SN0027CS, SN0031CS & SN0036CS Recessed round wash basins, manufactured in stainless steel AISI 304, 1.2mm thick, in bright or satin finish, that makes a perfect blend of style and functionality and providing them a great endurance, as well. Basins are circular, presenting different sizes (Ø 265/305 mm, Ø 315/355 mm or Ø 355/405 mm) to suit specific needs of requirements of our customers. They have a waste hole of Ø 50 mm and they are prepared with or without water overflow hole. These wash basins are very easy to install, clean and maintain.

Optima sensor operated hand dryers from Mediclinics are a suitable solution for those looking for an auto hand dryer with an optimum performance at a very competitive price. These models are ideal to be installed in washrooms with an average traffic of people like for example, restaurants, theatres, offices, etc. Sensor operated models, equipped with an induction motor, which do not require any maintenance. Manufactured using the highest quality materials, they also include an optical reader for hand distance detection, which is adjustable. In order to better blend with the washroom’s decoration, it is available in AISI 304 stainless steel bright or satin finish. Thanks to R&D&I, Mediclinics manufactur a dryer with a smooth design, which is made using a highly robust material, with anti-vandalism features. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: DJ0031, DJ0031C & DJ0031CS Hand-operated liquid soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304 0.8 mm thick, to be installed directly on the wall. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.25 Kg these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 1.5 ml of soap per service. This anti-drip valve is easily interchangeable with the valves of the other soap dispensers of the same line, so you can easily turn this liquid soap dispenser into a foam or spray soap dispenser. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use liquid soaps or disinfectant gel soaps with a density between 0.9 and 1.35 kg/dm3 and a maximum viscosity of 3,000 cps.

Part numbers: PR2784 Double standard roll toilet paper dispensers, 2 rolls capacity, made in steel 0.8 mm. thick, wall mounted, designed and manufactured by Mediclinics®, S.A. These models are designed to be used in restaurants, offices, hospitals, etc., presenting a suitable design for a simple bathroom integration. Body made in a single piece, these roll toilet paper dispensers are available in white Epoxy® finish. These roll toilet paper dispensers models have a functional, robust and trendy design that matches the new range of Mediclinics® bathroom accessories. This allows this roll toilet paper dispenser to blend into any space perfectly. In addition, these roll toilet paper dispensers have two level displays in both sides of the body that constantly indicates the level of the paper available and show when it is necessary to replace the paper roll. With a capacity of two standard rolls, these roll toilet paper dispenser models include an automatic mechanism, which causes the next roll to drop once the bottom roll has been used. It is a plastic bracket for the reserve paper roll that can be regulated in two different positions, depending on the dimensions of the paper roll and that allows the free movement of the roll in use. The paper roll drops when the previous has been consumed, through a simple manipulation by the level displays at the side.

Optima sensor operated hand dryers from Mediclinics are a suitable solution for those looking for an auto hand dryer with an optimum performance at a very competitive price. These models are ideal to be installed in washrooms with an average traffic of people like for example, restaurants, theatres, offices, etc. Sensor operated models, equipped with an induction motor, which do not require any maintenance. Manufactured using the highest quality materials, they also include an optical reader for hand distance detection, which is adjustable. In order to better blend with the washroom’s decoration, it is available in steel white Epoxy finish. Thanks to R&D&I, Mediclinics manufactur a dryer with a smooth design, which is made using a highly robust material, with anti-vandalism features. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: DJ0040, DJ0040C & DJ0040CS Soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, to be installed directly on the wall and hand-operated through a push-button made in stainless steel. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.2 Kg and manufactured in stainless steel AISI 304, 0.8 mm thick, these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 0.8 ml of soap per service. This valve is easily removable from the plastic tank for maintenance purposes. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use liquid soaps with neutral pH and chlorides free.

Part numbers: M03AC & M03ACS Mediflow® stainless steel hand dryer models are characterised by their power and ruggedness. Automatically operated compact solutions, which thanks to its two product options, are better suited for any type of washroom environment. Mediflow® Basic line are made according to the highest quality and safety standards. It includes a safety thermal limiter, automatic disconnect system, safety screws and special wrench type opener. The cover of these hand dryers is made in AISI 304 stainless steel, 1.5 thick and available in bright finish or in AISI 304 stainless steel satin finish. It represents a stylish choice. Also, Mediclinics offers the possibility of incorporating items to the entire Mediflow® product line such as the flush mounting kit, galvanized metal cabinet for installing the hand dryer, which allows complying with the ADA/UNE standard for eliminating architectural barriers in washrooms. In summary, Mediflow® solutions are proven long lasting and completely reliable models. Versatile hand dryers with anti-vandalism features and designed to be installed in areas with a large traffic of people such as: airports, large hotels, sports centres, large recreational areas and official organizations among others.

Part numbers: DJS0033, DJS0033C & DJS0033CS Hand-operated spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304 0.8 mm thick, to be installed directly on the wall. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.25 Kg these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 0.8 ml of soap per service. This anti-drip valve is easily interchangeable with the valves of the other soap dispensers of the same line. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use spray soaps with a maximum density of 0.8 kg/dm3 and a maximum of alcohol content of 85 %.

The Mediclinics’ open waste models are designed for high traffic washrooms that experience a large influx of people and they are manufactured in two different capacities: 65 and 80 litters. They are a perfect solution for gymnasiums, sports centers, hospitals, health centers and similar type of installations. The solutions provided by this category are available AISI 304 stainless steel bright or and satin finish. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and can be either free-standing or wall-mounted. They have a retaining system on the inside to secure the waste plastic bag and four black thermoplastic feet to keep the bottom of the bin clear of any moisture.

Part numbers: M09AC-UL & M09ACS-UL Designed to dry quickly, the Machflow® high speed hand dryer, combines a very powerful airflow with low usage. So fast and so efficient that is really a break-through for the industry. You will love this blower. The cover of this hand dryers is manufactured in stainless steel AISI 304, 1.5 mm thick and it is available in two finishes (bright and satin). This new vandal-resistant modern dryer incorporates a low energy, high pressure motor that produces high velocity airflow capable of drying hands in as little as 10-15 seconds, drawing a min of 450 watts instead of the usual 2.300 Watts. With a maximum speed of 203 mph is probably the fastest & most efficient hand dryer in the industry. The dryer is very easy to install, utilizing Universal voltage (from 110 to 240 V) that adjusts automatically, perfect for older buildings & contributing to its energy efficiency. Machflow dryer can also be turned down for quieter operation, ideal for public libraries & campus facilities. In summary , a very reliable HIGH SPEED dryer.

Optima sensor operated hand dryers from Mediclinics are a suitable solution for those looking for an auto hand dryer with an optimum performance at a very competitive price. These models are ideal to be installed in washrooms with an average traffic of people like for example, restaurants, theatres, offices, etc. Sensor operated models, equipped with an induction motor, which do not require any maintenance. Manufactured using the highest quality materials, they also include an optical reader for hand distance detection, which is adjustable. In order to better blend with the washroom’s decoration, it is available in AISI 304 stainless steel bright or satin finish. Thanks to R&D&I, Mediclinics manufactur a dryer with a smooth design, which is made using a highly robust material, with anti-vandalism features. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: DJF0032, DJF0032C & DJF0032CS Hand-operated foam soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304 0.8 mm thick, to be installed directly on the wall. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.25 Kg these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 1.0 ml of soap per service. This anti-drip valve is easily interchangeable with the valves of the other soap dispensers of the same line, so you can easily turn this liquid soap dispenser into a liquid or spray soap dispenser. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use foam soaps with a density between 0.95 and 1.05 kg/dm3.

The Mediclinics’ open bins models are designed for a medium traffic washrooms and they have a capacity of 25 L. They are a perfect solution for gymnasiums, sports centers, hospitals, health centers and similar type of installations. The solutions provided by this category are available in AISI 304 stainless steel bright or satin finish. Highly resistant solutions for medium traffic, with anti-vandalism features; the body is made of a solid piece and can be either free-standing or wall-mounted.

Part numbers: BR0300C, BR0400C, BR0600C, BR0750C, BR0900C, BR1200C, BR0300CS, BR0400CS, BR0600CS, BR0750CS, BR0900CS & BR1200CS Grab bar manufactured by Mediclinics in stainless steel bar Ø 32 mm, 1,5 mm thickness and with a snap flange cover for hidden mounting. State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright and satin finish. Stainless steel screws and plastic plugs to install the grab bar to the wall are provided.

Part numbers: M03A Mediflow® stainless steel hand dryer models are characterised by their power and ruggedness. Automatically operated compact solutions, which thanks to its two product options, are better suited for any type of washroom environment. Mediflow® Basic line are made according to the highest quality and safety standards. It includes a safety thermal limiter, automatic disconnect system, safety screws and special wrench type opener. The cover of these hand dryers is made in steel, 1.5 thick and available in white Epoxy finish.

Part numbers: M03AC & M03ACS The MEDIFLOW® Series of hand dryers was designed & developed with ergonomic principles in mind, focusing on functionality, safety and anti-vandalism. These Serie boast the legendary SANFILOW airflow – over 315 CFM per hour plus fully automatic operation, precision design and efficiency, reducing the noise level to the minimum of the market on its category. The cover of these hand dryers is available in AISI 304 stainless steel bright finish or in AISI 304 stainless steel satin finish, it represents a stylish choice.

Part numbers: M09A & M09AB The line of Machflow® steel sensor operated hand dryers provides important energy savings and an ultra-fast drying. Solutions with an avant-garde design and with two different finishes so that the dryers can easily blend in with the decoration. Its main advantages include: - energy savings (1.9 Watts per drying cycle) - ultra-fast drying time. Dries hands in record speed, between 8 and 12 seconds) - caring for the environment. The Machflow® family consumes an average of 237 Kg of CO2, which represents a 53% annual carbon print reduction) - minimum noise pollution (between 68 and 75 dB) The cover of this hand dryers is manufactured in steel, 1.5 mm thick and it is available in two finishes (white and black Epoxy). With a maximum air speed of 325 Km/h, the Machflow Mediclinics’ hand dryers stands out in the fast drying sector, while complying with the most important international quality and safety certifications; its anti-vandalism features make it suitable for use at facilities with a high traffic of people.

Part numbers: M04A-120V, M04AC-120V & M04ACS-120V The economic line of Smartflow® hand dryers is one of the most compact in the market, designed for locations that because of their size require small sized washroom accessories that meet two requirements: low consumption and optimum hand drying. These units are automatic dryers that offer an optimum relationship between functionality and price. Because of its features and design, this economic line is intended to be installed in areas with a large trafic of people like for example medium sized restaurants, cafeterias or the offices of a small or medium sized company. Three models with different finishes are available: White, bright and satin. All of them with an ABS resistant cover and electronic detection sensor by infrared beam with adjustable distance detection, that allows a better adaptability to different types of washrooms. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

The wide range of Madras® finishes and patterns represents the most complete collection of glass for manufacturing doors of every sort. Madras® textures and patterns are made exclusively with satin finishing and chemical etching techniques that enhance the qualities of glass far more than traditional sand-blasting and produce a beautiful silky touch, fingerprint-proof. All the glass products in the range can be strengthened and laminated and are therefore suitable for making doors in full compliance with international safety standards. Madras® products are also available in a safety version laminated with a float glass base to UNI EN ISO 12543:2011 and EN 14449: 2005.

The wide range of Madras® finishes and patterns represents the most complete collection of glass for manufacturing doors of every sort. Madras® textures and patterns are made exclusively with satin finishing and chemical etching techniques that enhance the qualities of glass far more than traditional sand-blasting and produce a beautiful silky touch, fingerprint-proof. All the glass products in the range can be strengthened and laminated and are therefore suitable for making doors in full compliance with international safety standards. Madras® products are also available in a safety version laminated with a float glass base to UNI EN ISO 12543:2011 and EN 14449: 2005.

The wide range of Madras® finishes and patterns represents the most complete collection of glass for manufacturing doors of every sort. Madras® textures and patterns are made exclusively with satin finishing and chemical etching techniques that enhance the qualities of glass far more than traditional sand-blasting and produce a beautiful silky touch, fingerprint-proof. All the glass products in the range can be strengthened and laminated and are therefore suitable for making doors in full compliance with international safety standards. Madras® products are also available in a safety version laminated with a float glass base to UNI EN ISO 12543:2011 and EN 14449: 2005.

The wide range of Madras® finishes and patterns represents the most complete collection of glass for manufacturing doors of every sort. Madras® textures and patterns are made exclusively with satin finishing and chemical etching techniques that enhance the qualities of glass far more than traditional sand-blasting and produce a beautiful silky touch, fingerprint-proof. All the glass products in the range can be strengthened and laminated and are therefore suitable for making doors in full compliance with international safety standards. Madras® products are also available in a safety version laminated with a float glass base to UNI EN ISO 12543:2011 and EN 14449: 2005.

The wide range of Madras® finishes and patterns represents the most complete collection of glass for manufacturing doors of every sort. Madras® textures and patterns are made exclusively with satin finishing and chemical etching techniques that enhance the qualities of glass far more than traditional sand-blasting and produce a beautiful silky touch, fingerprint-proof. All the glass products in the range can be strengthened and laminated and are therefore suitable for making doors in full compliance with international safety standards. Madras® products are also available in a safety version laminated with a float glass base to UNI EN ISO 12543:2011 and EN 14449: 2005.

FUNCTIONAL AND FLEXIBLE Store your magazines, firewood, wine bottles, towels, shoes or clothes safe and stylish – 4 mm iron walls on a steady foot of concrete will house your items in an ordered and practical manner. Available in eleven different finishes, all with their own unique expression.

NOVALIS UNIVERSAL ENAMEL by OIKOS is a low environmental impact, acrylic, enamel for exteriors and interiors, suitable for use on all types of surfaces: Iron, wood, zinc sheets, PVC etc. Its formulation makes NOVALIS UNIVERSAL ENAMEL by OIKOS easy to use as it does not drip or run during application. It adheres well to the support and dilates to give excellent coverage and at the same time is highly resistant to abrasion and washing. The product is non yellowing due to its resistance to atmospheric agents and stability to light and possesses also a high elasticity. NOVALIS UNIVERSAL ENAMEL by OIKOS is available in gloss, satin and matt finishes. It has a low odour level is non inflammable and is friendly to both humans and the environment.

DESIGNER: EDWARD BARBER AND JAY OSGERBY THE NAME REFERS TO THE ORNAMENTAL STONES IN JAPANESE GARDENS, WHICH HAVE INSPIRED THE COMPONENTS OF TOBI-ISHI. IT CONVERGES BOTH FUNCTIONAL FEATURES AND A STATUESQUE APPEARANCE WITH AMAZING RESULTS. THE OVERHANGING TOP AND BASES LOOK DIFFERENT DEPENDING ON THE VIEWPOINT, WHILE THE VARIOUS FINISHES ENDOW THE TABLE WITH HIGHLY PERSONAL INTERPRETATIONS: FROM CEMENT TO MARBLE AND LACQUER IN THE SOPHISTICATED HUES OF RED CANDY AND BLUE SMOKE.

DESIGNER: JEAN-MARIE MASSAUD THREE UNEVEN SIDES ARE AN ALTERNATIVE TO THE TRADITIONAL LAYOUT. DESIGNED TO SEAT 7, IN THE FORMATION 3+2+2. THE APPEARANCE CHANGES DEPENDING ON THE WOOD OR LACQUER FINISH BUT THE PATTERN OF THE THREE-BRANCH STRUCTURE EMERGES ON THE TOP’S SURFACE CREATING A GRAPHIC DECORATION TO CONTRAST WITH OR MATCH THE COLOUR OF THE TOP.

ULTRASATEN is a low environmental impact, acrylic enamel for walls, that comes in a gloss, matt or satin finish. The product is self-expanding, scratch resistant and resistant to abrasion.

PRESTOTEM SERIES 1 SHOWER PANELS WITH PRESTO 50 SELF CLOSING TAP AND THERMOSTATIC MIXER TAP Function : The thermostatic shower panel panel turns on the water flow by simple pressure on the push button. The water stops running automatically after a factory-set time period. With anti-scalding system: water flow is immediately stopped if the cold water is cut off. This range is available with shower head or hand-held spray head, white ivory or satin grey finish,... ADVANTAGES : EN 1111 compliant thermostatic mixer tap Patented mechanism guaranteeing constant timed flow High-resistance aluminium structure Resists to temperatures > 75°C

Keystone (Coquina, Limestone) Tiles 1'-0"x2'-0"

Ridge tile in series with optional inclination and radius.

This object uses manufacturer specific information, much of which is typical for the US market. It can also serve as a GDL template for quickly creating other bath fixtures by drawing your own 2D Fragments and substituting your own geometry in the 3D subroutines. Also, note the special "2D" and "3D" options. * Place using Rough-in Center line or Clearance., * 2D "Foot Print View is helpful for coordinating floor tile installations.

3D parametric, scenery / tiles in the wall, Spanish

Parallel battens for roof tiles.

Ridge tile in series with optional inclination and radius.

Paneling EMK 12 Erich Karp Nov. 20093D parametric, paneling with optional\n- numbers of horizontal and vertical panels\n- thicknesses\n- frame sizing\n- seamless sides

Parallel battens for roof tiles.

Version 2.01

3D parametric, colored tiles

Purusline Living drain, 600mm with Ø50mm side side outlet (includes adaptor made from ABS. Fits outlet 50 mm and reduces it to 1½“. For solvent welding.) Purusline Living Wetroom Solution with Tile Insert Grate accommodates tiles up to a thickness of 10mm with a 3mm bed of tile adhesive, making the use of larger format tiles easier. The outlet is made of Polypropylene (PP) plastic and is designed to be self cleaning. Falls are built into the product for ease of maintenance so there is no dirt and odour build up. The unique NOOD trap does not allow any smells or odours to come up from the waste pipes even if it dries out.

Purusline Living drain, 600mm with Ø50mm side outlet (includes adaptor made from ABS. Fits outlet 50 mm and reduces it to 1½“. For solvent welding.) Purusline Living Wetroom Solution with Tile Insert Grate accommodates tiles up to a thickness of 10mm with a 3mm bed of tile adhesive, making the use of larger format tiles easier. The outlet is made of Polypropylene (PP) plastic and is designed to be self cleaning. Falls are built into the product for ease of maintenance so there is no dirt and odour build up. The unique NOOD trap does not allow any smells or odours to come up from the waste pipes even if it dries out.

Purusline Living drain, 800mm with Ø50mm side outlet (includes adaptor made from ABS. Fits outlet 50 mm and reduces it to 1½“. For solvent welding.) Purusline Living Wetroom Solution with Tile Insert Grate accommodates tiles up to a thickness of 10mm with a 3mm bed of tile adhesive, making the use of larger format tiles easier. The outlet is made of Polypropylene (PP) plastic and is designed to be self cleaning. Falls are built into the product for ease of maintenance so there is no dirt and odour build up. The unique NOOD trap does not allow any smells or odours to come up from the waste pipes even if it dries out.

Purusline Living drain, 800mm with Ø50mm side side outlet (includes adaptor made from ABS. Fits outlet 50 mm and reduces it to 1½“. For solvent welding.) Purusline Living Wetroom Solution with Tile Insert Grate accommodates tiles up to a thickness of 10mm with a 3mm bed of tile adhesive, making the use of larger format tiles easier. The outlet is made of Polypropylene (PP) plastic and is designed to be self cleaning. Falls are built into the product for ease of maintenance so there is no dirt and odour build up. The unique NOOD trap does not allow any smells or odours to come up from the waste pipes even if it dries out.

PURUS miniMAX has low profile and a special designed water trap with NOOD function with top access. Even if the drain dries out, no foul air comes up through the drain, because the spring-loaded trap keeps itself closed. The water trap is easily removed by pulling up with the automatically raised handle. The miniMAX works as an outlet without the water trap. PURUS miniMax Two Part is for wetroom former trays. Includes a 50mm to 1½” push fit to solvent weld ABS adapter.

Purusline Living drain, 600mm with Ø50mm low side outlet (includes adaptor made from ABS. Fits outlet 50 mm and reduces it to 1½“. For solvent welding.) Purusline Living Wetroom Solution with Tile Insert Grate accommodates tiles up to a thickness of 10mm with a 3mm bed of tile adhesive, making the use of larger format tiles easier. The outlet is made of Polypropylene (PP) plastic and is designed to be self cleaning. Falls are built into the product for ease of maintenance so there is no dirt and odour build up. The unique NOOD trap does not allow any smells or odours to come up from the waste pipes even if it dries out.

Purusline Living drain, 800mm with Ø50mm low side outlet (includes adaptor made from ABS. Fits outlet 50 mm and reduces it to 1½“. For solvent welding.) Purusline Living Wetroom Solution with Tile Insert Grate accommodates tiles up to a thickness of 10mm with a 3mm bed of tile adhesive, making the use of larger format tiles easier. The outlet is made of Polypropylene (PP) plastic and is designed to be self cleaning. Falls are built into the product for ease of maintenance so there is no dirt and odour build up. The unique NOOD trap does not allow any smells or odours to come up from the waste pipes even if it dries out.

test

Slab Accessory that applies grid lines to the surface of a slab that can be snapped to and centered in a ceiling area. The host massing slab should be modeled first and selected before applying the Slab Accessory which is typically located at Design/Design Extras/Accessories/Slab Accessories… In order to function, one of the Goodies for ArchiCAD called “Accessories” must be installed and its accompanying Accessory Library must be loaded. Go to http://www.graphisoft.com/downloads/goodies/AC17/USA.html updated by Ransom Ratcliff

3D parametric, wood boarding, horizontal, Hungarian

3D parametric, wood boarding, vertical, Hungarian

3D parametric, wood boarding with space, horizontal, Hungarian

3D parametric, wood boarding, vertical, English

3D parametric, wood boarding with space, horizontal, English

3D parametric, wood boarding, horizontal, English

EQUITONE [natura] is a through coloured façade material. Every EQUITONE panel is unique, displaying the raw texture of the fibre cement base material. The material comes in a maximum panel size of 1,25 x 3m (4´x 10´) and can be transformed in any size or shape in the workshop or on-site. Furthermore, the material can be perforated or printed. Visible and invisible fixing methods include riveting, screwing and bonding on metal or wood supporting frames. No matter what design options you explore, the through-coloured nature of EQUITONE assures crisp, monolithic details. Request a sample at www.equitone.com [LIST] NOTE: Revit installer only available for Revit version 2013 and 2014 [/LIST]

EQUITONE [textura] is a versatile fibre cement façade material. The material is coated with a textured, highly resistant coating. The material comes in a maximum panel size of 1,25 x 3m (4´x 10´) and can be transformed in any size or shape in the workshop or on-site. Furthermore, the material can be perforated or printed. Visible and invisible fixing methods include riveting, screwing and bonding on metal or wood supporting frames. [LIST] NOTE: Revit installer only available for Revit version 2013 and 2014 [/LIST]

EQUITONE [pictura] is a versatile fibre cement façade material. The material is coated with a ultramatt, highly resistant coating. The material comes in a maximum panel size of 1,25 x 3m (4´x 10´) and can be transformed in any size or shape in the workshop or on-site. Furthermore, the material can be perforated or printed. Visible and invisible fixing methods include riveting, screwing and bonding on metal or wood supporting frames. [LIST] NOTE: Revit installer only available for Revit version 2013 and 2014 [/LIST]

StoVentec is a ventilated facade system with a built-in air gap. The perforated steel section can be installed both vertically and horizontally. The system's ventilation and drainage keep the underlying wall structure permanently dry, protected, and functional. The seamless StoVentec also makes the facade downpour-proof and minimises the risk of water penetrating the structure. The external wall insulation system can be used in both new construction and renovation. StoVentec can be combined with different types of insulation and sub-constructions to meet the requirements placed on energy efficiency. The system also offers boundless design possibilities. - This BIM object is optimized for the scandinavian market, if there is any requests please contact Sto Scandinavia

StoVentec is a ventilated facade system with a built-in air gap. The flexible sub-construction enables large-scale corrections of uneven patches and insulation thicknesses of up to 600 mm. The system's ventilation and drainage keep the underlying wall structure permanently dry, protected, and functional. The seamless StoVentec also makes the facade downpour-proof and minimises the risk of water penetrating the structure. The external wall insulation system can be used in both new construction and renovation. StoVentec can be combined with different types of insulation and sub-constructions to meet the requirements placed on energy efficiency. The system also offers boundless design possibilities. - This BIM object is optimized for the scandinavian market, if there is any requests please contact Sto Scandinavia

StoVentec is a ventilated facade system with a built-in air gap. The system's ventilation and drainage keep the underlying wall structure permanently dry, protected, and functional. The seamless StoVentec also makes the facade downpour-proof and minimises the risk of water penetrating the structure. The external wall insulation system can be used in both new construction and renovation. StoVentec can be combined with different types of insulation and sub-constructions to meet the requirements placed on energy efficiency. The system also offers boundless design possibilities. - This BIM object is optimized for the scandinavian market, if there is any requests please contact Sto Scandinavia

StoTherm Vario D+ is a moisture-proof external wall insulation system that combines light insulation materials with good insulation value, good drainability, and documented fire safety. The Sto-Ignucell Carrier Board 036 has several unique characteristics; it is draining, diffusion-open, equalises pressure, and has a fire classification without any addition of environmentally hazardous substances. To ensure their airtightness and moisture-proofness, the light stud walls are furnished with the StoGuard structure barrier. The system is well-suited to both new construction and renovation, e.g. as measures for damaged facades or energy upgrades to low-energy or passive houses. The components have been tested and comply with the requirements of the Swedish National Board of Housing, Building and Planning. - This BIM object is optimized for the scandinavian market, if there is any requests please contact Sto Scandinavia.

Porcelain tile, cement style, six colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, cement style, four colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, aged wood style, five colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, marble style, fourteen colors and two diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, slate style, three colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, cement style, three colors and two diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body rectified tile, bright white. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

MTH Concertto facade sheets contain several embossed panels in the form of squares or rectangles. In a Concertto facade, there are few cut edges and no straight horizontal surfaces that could collect dirt. This compact entity is durable and extremely rapid to install. The Concertto metal facade combines beautiful appearance and freedom of design with cost-effectiveness, rapid installation, and a high-quality result. Hot-galvanised steel sheeting with a PVDF coating (protective film) or paint, with a material thickness of 1.00 mm. Aluminium with a PVDF coating, with a material thickness of 1.00 mm or 1.20 mm

MTH Concertto facade sheets contain several embossed panels in the form of squares or rectangles. In a Concertto facade, there are few cut edges and no straight horizontal surfaces that could collect dirt. This compact entity is durable and extremely rapid to install. The Concertto metal facade combines beautiful appearance and freedom of design with cost-effectiveness, rapid installation, and a high-quality result. Hot-galvanised steel sheeting with a PVDF coating (protective film) or paint, with a material thickness of 1.00 mm. Aluminium with a PVDF coating, with a material thickness of 1.00 mm or 1.20 mm

A through-coloured fibre-cement sheet with a semi-transparent surface treatment. The sheet has the classic fibre-cement expression and therefore appears with a genuine depth in the structure. the surface treatment enhanced the colouration within the base board whilst improving resistance to dirt. The combination of the genuine fibre cement and the homogeneous surface gives the sheet a characteristic and interesting expression. Cembrit True is available in 7 carefully selected colours. [LIST] 301 Gobi 302 Vesuv 304 Antarctic 307 Kilimanjaro 308 Etna 309 Olympus 310 Sahara [/LIST]

Classic grey fibre-cement sheet fully covered with 100% opaque, water-based acrylic paint in a range of contemporary colours. The full-covering paint makes the sheet powerfully resistant to green moss and algae, water stains and dirt. Cembrit Metro comes in 26 expressive URBANNATURE colours inspired by vibrant, dynamic metropolises in Europe. The sheet has an intense sheen and is highly wind and weather resistant. [LIST] 101 Hamburg 102 Madrid 103 Geneva 104 Barcelona 105 Athens 106 Lyon 107 Oslo 108 Berlin 109 Nuuk 110 Helsinki 111 Dublin 112 Amsterdam 113 Copenhagen 114 Istanbul 115 Riga 116 Naples 117 Stockholm 118 London 119 Prague 120 Bonn 121 Lisbon 122 Kiev 123 Rome 124 Milan 125 Vilnius 126 Sofia [/LIST]

A through-coloured baseboard fully covered with a matching 100% acrylic, water-based paint in a number of deep and natural colours with an intense sheen. The unique combination of a through-coloured sheet and opaque paint gives the sheet a smooth and strong surface with reduced risk of visible scratches. The sheet is powerfully resistant towards green moss and algae as well as extreme weather conditions. Cembrit Zenit comes in 16 natural yet intense URBANNATURE colours inspired by the universe and named after the colourful planets in the skies above. Among the standard colours, you find the blackest colour in the entire URBANNATURE range. This colour is named after the darkest planet ever discovered, also known as Erebus after the Greek god of darkness. [LIST] 501 Venus 502 Mars 503 Neptune 504 Luna 505 Terra 506 Jupiter 507 Orcus 508 Pluto 509 Mercury 510 Erebus 511 Rhea 512 Saturn 513 Ceres 514 Triton 515 Mimas 516 Callisto [/LIST]

EQUITONE [tectiva] is a through coloured facade material. Every EQUITONE panel is unique, showing the raw, untreated texture of the fibre cement base material. It is characterised by sanded lines and naturally occurring hues within the material. The material comes in a maximum panel size of 1,25 x 3m (4´x 10´) and can be transformed in any size or shape in the workshop or on-site. Furthermore, the material can be perforated or printed. Visible and invisible fixing methods include riveting, screwing and bonding on metal or wood supporting frames. No matter what design options you explore, the through-coloured nature of EQUITONE assures crisp, monolithic details. Request a sample at www.equitone.com [LIST] NOTE: Revit installer only available for Revit version 2013 and 2014 [/LIST]

Harzer profile concrete tiles are a optimized development of the classic concrete tiles. It is produced on special molds in which concrete mixture is rolled out. This production method allows a great uniformity of the final products. The Harzer profile roof tile is manufactured in one of Monier's factories in Finland and shipped from our warehouses in Finland and Baltics

Sidney SKIRTING / 450 x 80. Floor Tiles. Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Sidney MOSAIC / 250 x 400. Wall Tiles. Colours/Finishes: 041 Beige, 021 Grey

Sidney BASE / 310 x 610. Floor Tiles. Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Sidney BASE / 450 x 450. Floor Tiles. Slip resistance (pendulum): Clase 1 (ENV 12633). Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit,

Sidney BASE / 250 x 400. Floor Tiles. Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Sidney BASE /316 x 316. Floor Tiles. Slip resistance (pendulum): Clase 1 (ENV 12633). Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Minster is a completely flat, modern concrete slate. It has a uinique suface Production takes place in special molds in which concrete mixture is rolled out. This production method allows a great uniformity of the final products. The Minster roof tile is manufactured in one of Monier's factories in Germany and shipped from our warehouse in Denmark, Norway, Sweden, Finland, Estonia, Latvia and Lithuania

Ecophon Hygiene Foodtec A C3 is a wall to wall, sound-absorbing ceiling system intended for environments where there is risk for contaminations, and where frequent cleaning is required. This system is recommended where humidity levels are occasionally high. Examples of applications: the food and beverage industries, restaurants and catering kitchens. The system consists of Ecophon Hygiene Foodtec A tiles, which have a core of high density glass wool utilizing the 3RD Technology and a painted stain protected Akutex HS surface. The back and the edges are painted. The tile is designed to be demounted and cleaned on a regular basis. The supporting structure is a corrosion protected exposed Connect T24 C3 grid of lacquered galvanised steel. The weight of the system is approximately 3,5 kg/m2 (20 mm) and 5 kg/m2 (40 mm). The tiles should be secured to the grid with Connect Hygiene clips in order to withstand pressure during cleaning and to minimise dirt traps.

The BIM-models contains 6 different lengths (600,700,800,900,1000 and 1200mm) and two different outlets (Ø50 and Ø75). The flow capacity is 0,8l/s. Purus Line is for installation in concrete or wooden joists and use with floor tiles unless otherwise stated. Purus designed floor gullies are an example of how creativity and design can revolutionize an industry. The technology, quality and functionality are equally as reliable as our other floor gullies, but the innovative design provides a more personal touch in the bathroom. Purus designed floor gullies are available in a variety of shapes and colors and offer a high degree of freedom when installing the floor gully in wet rooms.The channel/sub-section is in stainless steel and the outlets is in plastic.

For applications where an attractive suspended ceiling is required and easy removal of individual tiles is essential. Ecophon Focus E has a recessed visible grid and a tegular edge design, creating a ceiling with a shadow effect that accentuates each tile and partially conceals the grid system. The visible surface of each tile is 10 mm below the grid. Each tile is easily demountable. The systems consist of Ecophon Focus E tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are painted. For best performance and system quality, use Ecophon Connect grid and accessories. The grid is manufactured from galvanized steel.

For applications where a robust suspended ceiling system is required. Ecophon Focus A has an exposed grid system. Each tile is easily demountable. The systems consist of Ecophon Focus A tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are primed. The grid is manufactured from galvanized steel.

Suitable for open plan offices or other premises where strict demands are made on good acoustics and speech intelligibility. For applications where a suspended ceiling with a concealed grid is required, but individual tiles must be easily demountable. Ecophon Master Ds has a concealed grid and symmetrical edge design, allowing easier assembly, integration of light fittings and ventilation. The ceiling has an even appearance, with the bevelled edges forming a discreet groove between the tiles. The tiles are easily demountable. The systems consist of Ecophon Master Ds tiles and Ecophon Connect grid systems, with an approximate weight of 6 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex FT coating and the back of the tile is covered with glass tissue. The edges are painted.

The BIM-models contains 6 different lengths (600,700,800,900,1000 and 1200mm) and two different outlets (Ø50 and Ø75). The flow capacity is 0,8l/s. Purus Line is for installation in concrete or wooden joists and use with floor tiles unless otherwise stated. Purus designed floor gullies are an example of how creativity and design can revolutionize an industry. The technology, quality and functionality are equally as reliable as our other floor gullies, but the innovative design provides a more personal touch in the bathroom. Purus designed floor gullies are available in a variety of shapes and colors and offer a high degree of freedom when installing the floor gully in wet rooms.The channel/sub-section is in stainless steel and the outlets is in plastic.

For applications where a suspended ceiling with a concealed grid is required, but individual tiles must be easily demountable. Ecophon Focus Ds has a concealed grid and symmetrical edge design, allowing easier assembly, integration of light fittings and ventilation. The ceiling has an even appearance, with the bevelled edges forming a discreet groove between the tiles. The tiles are easily demountable. The systems consist of Ecophon Focus Ds tiles and Ecophon Connect grid systems, with an approximate weight of 3-4 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are painted. For best performance and system quality, use Ecophon Connect grid and accessories. The grid is manufactured from galvanized steel. The system is patented.

Quartz (Joel Karlsson, 2011), is a rectangular tile of sound-absorbent, compression-moulded fibre-felt in a choice of three lengths: small 320 mm, medium 480 mm and large 640 mm. Each rectangle is 160 mm wide and 56 mm in depth. The inspiration for the de

Suitable for open plan offices or other premises where strict demands are made on good acoustics and speech intelligibility, and where demountability is vital. Ecophon Master A has an exposed grid system. Each tile is easily demountable. The system consists of Ecophon Master A tiles and Ecophon Connect grid systems, with an approximate weight of 5 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex FT coating and the back of the tile is covered with glass tissue. The edges are primed. For best performance and system quality, use Ecophon Connect grid and accessories. The grid is manufactured from galvanized steel.

For ceilings in sports halls or similar where there is risk of high mechanical impact. Ecophon Super G Plus A has a robust grid system consisting of recessed profiles mounted directly to the soffit or on a suspended sub-grid. The tiles are not demountable. For wall absorbers, see Ecophon Vista C/Super G. The systems consist of Ecophon Super G Plus A tiles and Ecophon Connect grid systems, with an approximate weight of 6 kg/m² for direct installation and 10 kg/m² for suspended installation. The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface is a strong glass fibre fabric and the back of the tile is covered with glass tissue. The edges are primed.

For applications where a unique demountable suspended ceiling is required. The edge design of the system conceals the support edges of the tile and creates a distinctive floating appearance. The suspension grid is approximately 14 mm above the visible surface of the tile, which gives the impression that each tile is individually suspended. The tiles are easily demountable even in areas where there is a very small overall depth of system. The systems consist of Ecophon Focus Dg tiles and Ecophon Connect grid systems, with an approximate weight of 3-4 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are painted. For best performance and system quality, use Ecophon Connect grid and accessories. The grid is manufactured from galvanized steel.

Jönåkerpannan - profiled concrete tiles are a optimized development of the classic concrete tiles. It is produced on special molds on which concrete mixture is rolled out. This production method allows a great uniformity of the final products. Jönåkerpannan roof tile is manufactured in one of Monier's factories in Sweden The tile is available with the types of coatings. Protertor 2.0, Polar, and Elegant

Ecophon Focus Lp has a semi-concealed grid system and is used for highlighting direction in a room. There is a wide gap between the tiles in the emphasized direction and narrow gap in the other. The edges are sharp and well defined. The system consists of standard Focus Lp tiles in 600 mm width and Focus Lp Technical tiles in widths of 150, 300 and 600 mm. The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are painted. The Technical tiles are used to create areas for technical installations such as luminaires, ventilation, sprinklers, smoke detectors, loudspeakers etc. The exact width (148, 298 or 598 mm) is adopted to suit the standard sizes of luminaires on the market.

Ecophon Hygiene Performance A C3 is a wall to wall, sound-absorbing ceiling system intended for environments where there is a risk for slight contamination, and where cleaning is required on a regular basis. This system is recommended where humidity levels are occasionally high. Examples of applications: shower areas and swimming halls (under favorable and well controlled conditions). The system is classified B1 and B5 for zone 4 according to standard NF S 90-351 and clean room classified according ISO 5. The system consists of Ecophon Hygiene Performance A tiles, which have a core of high density glass wool utilizing the 3RD Technology and a painted cleanable Akutex™ TH surface. The back of the tile is covered with glass tissue. The edges are primed. The supporting structure is a corrosion protected exposed Connect T24 C3 grid of lacquered galvanised steel. The weight of the system is 3-4 kg/m²(20 mm) and 5 kg/m²(40 mm).

Suitable for open plan offices or other premises where strict demands are made on good acoustics and speech intelligibility. Ecophon Master E has a recessed visible grid and a tegular edge design, creating a ceiling with a shadow effect that accentuates each tile and partially conceals the grid system. The visible surface of each tile is 10 mm below the grid. Each tile is easily demountable. The system consists of Ecophon Master E tiles and Ecophon Connect grid systems, with an approximate weight of 5 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex FT coating and the back of the tile is covered with glass tissue. The edges are painted.

For applications requiring a dark ceiling having low light reflection and good sound absorbing properties. Ecophon Sombra A has an exposed grid system. Each tile is easily demountable. The system consists of Ecophon Sombra A tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m² (4 kg/m² with Ecophon Extra Bass). The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface is a matt black batch painted glass tissue and the back of the tile is covered with glass tissue. The edges are natural. For special applications i.e. cinemas, tiles with a sound reflecting surface, Sombra A/gamma, are available. To improve absorption in the low frequency range, Ecophon Extra Bass can be installed on top of the suspended ceiling. For best performance and system quality, use Ecophon Connect grid and accessories. The grid is manufactured from galvanized steel.

For applications where a robust suspended ceiling system is required. Ecophon Focus A has an exposed grid system. Each tile is easily demountable. The systems consist of Ecophon Focus A tiles and Ecophon Connect grid systems, with an approximate weight of 3 kg/m². The tiles are manufactured from high density glass wool utilizing the 3RD Technology. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are primed. The grid is manufactured from galvanized steel.

Ormax concrete tiles are a optimized development of the classic concrete tiles. It is produced on special molds in which concrete mixture is rolled out. This production method allows a great uniformity of the final products. The Ormax roof tile is manufactured in one of Monier's factories in Finland and shipped from our warehouses in Finland and Baltics Product links and data are maintained in Finnish language

Light, open facade cladding which allows ventilation of the wall construction behind. Used as wall panels in parapet lots and floor and apartment separation. Supplements the existing VELFAC 200 system as a facade to get the most uniform and ha

A P5 grade enhanced moisture resistant structural flooring board with permanent dual surface protection Covered by the EGGER Advanced Lifetime Guarantee if fitted correctly Can be installed in light rain conditions Fully sealed surface protects on site for up to 42 days Unique anti-slip surface contributes to site safety Ideal for use with under-floor heating The only board we would recommend you tile directly onto Available in 18 and 22 mm thicknesses – check loading requirements before specification

Our STONE product line features concrete outdoor tiles. Its design is inspired by natural stone. The specific texture along with a wide range of colours makes it impossible to distinguish these concrete outdoor tiles from natural stone. It does not matter whether you use it for your walkway or tiling, nobody will ever be able to tell that it is a natural stone imitation. STONE is a perfect combination of the advantages of concrete and the impeccable appearance of stone.

With Elitfönster’s inward opening triple glazed window, you are offered a good insulation capability and efficient sound reduction giving you a good living comfort throughout the year. Exterior aluminium cladding for extra long durability making it virtually maintenance free. The freedom of choices and combinations is great. Window construction - Sidehung wooden window with an exterior aluminium cladding - Single sash with triple glazed isolation glass sealed unit - U value between 1,0 and 1,3 - Sound reduction between Rw 33 dB and Rw 41 dB - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Opening: sidehung or Kipp-Dreh* - Many possible combinations with opening and fixed windows in the same frame *Kipp-Dreh is a double-functioning fitting where the window is hung both on the side and at the bottom Please refer to Elitfönster's size matrixes for possible combinations with minimum and maximum constraints

With Elitfönster’s inward opening 2+1 coupled window, you can enjoy the silence right in the middle of a city, next to motorways and railroads or if you live close to a factory. Our windows with low U values are energy efficient and give you a good living comfort throughout the year. The freedom of choices and combinations is great. Window construction - Sidehung wooden coupled window with an exterior aluminium cladding providing extra long sustainability making it virtually maintenance free - Coupled construction with a double isolation glass sealed unit in the wooden sash and a single glass pane in the aluminium sash - U value between 0,8 and 1,1 - Sound reduction between Rw 42 dB to Rw 47 dB - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Opening: sidehung or Kipp-Dreh* - Many possible combinations with opening and fixed windows in the same frame * Kipp-Dreh is a double-functioning fitting where the patio door is hung both on the side and at the bottom Please refer to Elitfönster's size matrixes for possible combinations with minimum and maximum constraints.

With Elitfönster’s inward opening 2+1 patio door construction, you can enjoy the silence right in the middle of a city, next to motorways and railroads or if you live close to a factory. Our patio doors with low U values are energy efficient and give you a good living comfort throughout the year. Patio door construction - Sidehung wooden coupled patio door with an exterior aluminium cladding providing extra long durability making it virtually maintenance free - Coupled construction with a double isolation glass sealed unit in the wooden sash and a single glass pane in the aluminium sash - U value between 0,8 and 1,1 - Sound reduction Rw 41 dB by default, up to Rw 47 dB as an option - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Opening: sidehung or Kipp-Dreh* *Kipp-Dreh is a double-functioning fitting where the patio door is hung both on the side and at the bottom Please refer to Elitfönster's size matrixes for possible combinations with minimum and maximum constraints

With Elitfönster’s fixed frame with a triple isolation glass unit (for the inward opening product family), you are offered a good insulation capability and efficient sound reduction which will give you a good living comfort throughout the year. The freedom of choices and combinations is great. Window construction - Fixed wooden frame with exterior aluminium cladding providing extra long durability making it virtually maintenance free - Triple isolation glass unit - U value 1.2 by default. U value down to 0.8 as an option. - Sound reduction Rw 34 dB by default, up to Rw 44 dB as an option. - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Many possible combinations with opening and fixed windows in the same frame. Please refer to Elitfönster's size matrixes for possible combinations with minimum and maximum constraints.

With Elitfönster’s inward opening triple glazed patio door, you are offered a good insulation capability and efficient sound reduction giving you good living comfort throughout the year. Exterior aluminium cladding for extra long durability making it virtually maintenance free. Patio door construction - Sidehung wooden patio door with an exterior aluminium cladding - Single sash with a triple isolation glass sealed unit - U value between 1,0 and 1,3 - Sound reduction between Rw 33 dB and Rw 41 dB - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Opening: sidehung or Kipp-Dreh* * *Kipp-Dreh is a double-functioning fitting where the patio door is hung both on the side and at the bottom

Steel stairs from Midthaug can be adapted to most areas and purposes. They will always be safe and good to use. Stair stringers are produced of laser-cut steel, either from sheet metal or hollow profiles. Steps made of grating or expanded metal are the most popular for outdoor use. Steps for mortar and tiles or flooring are the most popular indoor. The stairs can be combined with several of our railing models with either balustrades or glass panels.

Simbologia para plano de acabado en muros

Struttura in acciaio zincato a caldo e verniciato a polvere. Modulo Quadro, Jolly, Veranda e Tunnel sono disponibili nelle versioni senza base o con base integrata e in due altezze per permettere il fissaggio su superfici morbide o dure e poter applicare una eventuale pavimentazione di finitura. I moduli si completano di un tetto in tessuto Jarrah o in listelli in legno di sassofrasso; per Modulo Quadro è disponibile anche un tetto in alluminio impermeabilizzato e verniciato. Alla struttura di Modulo Quadro possono essere applicate pareti fisse o apribili in tessuto o listelli di legno; in alternativa, possono essere utilizzate tende in tessuto Shade o tende avvolgibili in tessuto Jarrah. Modulo Quadro e Modulo Tunnel si utilizzano singolarmente, in abbinamento ad altri moduli simili o con gli altri elementi della collezione. Modulo Jolly e Modulo Veranda devono sempre essere abbinati e collegati a Modulo Quadro o a Modulo Tunnel.

Struttura in acciaio zincato a caldo e verniciato a polvere. Modulo Quadro, Jolly, Veranda e Tunnel sono disponibili nelle versioni senza base o con base integrata e in due altezze per permettere il fissaggio su superfici morbide o dure e poter applicare una eventuale pavimentazione di finitura. I moduli si completano di un tetto in tessuto Jarrah o in listelli in legno di sassofrasso; per Modulo Quadro è disponibile anche un tetto in alluminio impermeabilizzato e verniciato. Alla struttura di Modulo Quadro possono essere applicate pareti fisse o apribili in tessuto o listelli di legno; in alternativa, possono essere utilizzate tende in tessuto Shade o tende avvolgibili in tessuto Jarrah. Modulo Quadro e Modulo Tunnel si utilizzano singolarmente, in abbinamento ad altri moduli simili o con gli altri elementi della collezione. Modulo Jolly e Modulo Veranda devono sempre essere abbinati e collegati a Modulo Quadro o a Modulo Tunnel.

Struttura in acciaio zincato a caldo e verniciato a polvere. Modulo Quadro, Jolly, Veranda e Tunnel sono disponibili nelle versioni senza base o con base integrata e in due altezze per permettere il fissaggio su superfici morbide o dure e poter applicare una eventuale pavimentazione di finitura. I moduli si completano di un tetto in tessuto Jarrah o in listelli in legno di sassofrasso; per Modulo Quadro è disponibile anche un tetto in alluminio impermeabilizzato e verniciato. Alla struttura di Modulo Quadro possono essere applicate pareti fisse o apribili in tessuto o listelli di legno; in alternativa, possono essere utilizzate tende in tessuto Shade o tende avvolgibili in tessuto Jarrah. Modulo Quadro e Modulo Tunnel si utilizzano singolarmente, in abbinamento ad altri moduli simili o con gli altri elementi della collezione. Modulo Jolly e Modulo Veranda devono sempre essere abbinati e collegati a Modulo Quadro o a Modulo Tunnel.

RIVESTIMENTO

Pavimentazione o rivestimento in resina decorata lucida

3D - Fliesenteilung an Boden oder Wand kleben Fliesen lassen sich in der Wand verschieben - mittlerer Anfasser und auch drehen. Ein Verlegen im "Verband" ist möglich.. 18 Randpunkte lassen sich verschieben, rechts und oben erweitert, links und unten nicht.

3D - Fliesenteilung an Boden oder Wand kleben Fliesen lassen sich in der Wand verschieben - mittlerer Anfasser Randpunkte lassen sich verschieben, rechts und oben erweitert, links und unten nicht. 19.12.2012:Rasterverschieber im 2D hinzugefügt, Randverschieber im 2D hinzugefügt

3D - Fliesenteilung an Boden oder Wand kleben Fliesen lassen sich in der Wand verschieben - mittlerer Anfasser Randpunkte lassen sich verschieben, rechts und oben erweitert, links und unten nicht. 20.12.2012 - "Raster" rastet nun genau auf Anfasser - Flieseneckpunkt ein und ist nun im2 D wesentlich genauer editierbar.

3D - Fliesenteilung an Boden oder Wand kleben Fliesen lassen sich in der Wand verschieben - mittlerer Anfasser Größenänderung nur im Grundriss, dann "aufdrehen" zu Wand 20.12.2012 - "Raster" rastet nun genau auf Anfasser - Flieseneckpunkt ein und ist nun im2 D wesentlich genauer editierbar.

#http://www.bimsoft.cz/cs/tondach-archicad TONDACH doplokové tašky Created: october, 2014 Designed & Developed by BIMsoft s.r.o. #http://www.bimsoft.cz ©BIMsoft s.r.o. 2014 Společnost BIMsoft byla založena začátkem roku 2013 z důvodu rostoucí poptávky v BIM prostředí. Hned od začátku působení společnosti BIMsoft jsme se zaměřeli na 3 základní značky BIM softwarů( archicad, revit, allplan) pro které jsem začali nabízet komplexní služby z hlediska BIM prostředí. Od samotné analýzy sortimentu výrobce, dále pak samotnou realizaci převedení sortimentu do BIM modelů až po samotnou distribuci těchto BIM prvků skrze marketingové kanály jednotlivých výrobců BIM softwarů a e-kanalů společnosti BIMsoft. Společnost BIMsoft jako jediný vývojářský tým v České Republice vyvýjí podle nejnovějších standartů Open BIM

#http://www.bimsoft.cz/cs/tondach-archicad TONDACH doplokové tašky okrajové Created: october, 2014 Designed & Developed by BIMsoft s.r.o. #http://www.bimsoft.cz ©BIMsoft s.r.o. 2014 Společnost BIMsoft byla založena začátkem roku 2013 z důvodu rostoucí poptávky v BIM prostředí. Hned od začátku působení společnosti BIMsoft jsme se zaměřeli na 3 základní značky BIM softwarů( archicad, revit, allplan) pro které jsem začali nabízet komplexní služby z hlediska BIM prostředí. Od samotné analýzy sortimentu výrobce, dále pak samotnou realizaci převedení sortimentu do BIM modelů až po samotnou distribuci těchto BIM prvků skrze marketingové kanály jednotlivých výrobců BIM softwarů a e-kanalů společnosti BIMsoft. Společnost BIMsoft jako jediný vývojářský tým v České Republice vyvýjí podle nejnovějších standartů Open BIM

White body non-rectified tile, five matt colors available. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body rectified tile, bright white. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body rectified tile, three bright colors available. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body non-rectified tile, six matt colors available. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

3D - Fliesenteilung an Boden oder Wand kleben Fliesen lassen sich in der Wand verschieben - mittlerer Anfasser Größenänderung nur im Grundriss, dann "aufdrehen" zu Wand 19.12.2012 - Radteranfasser im 2D hinzugefügt

#http://www.bimsoft.cz/cs/tondach-archicad TONDACH doplokové tašky Created: october, 2014 Designed & Developed by BIMsoft s.r.o. #http://www.bimsoft.cz ©BIMsoft s.r.o. 2014 Společnost BIMsoft byla založena začátkem roku 2013 z důvodu rostoucí poptávky v BIM prostředí. Hned od začátku působení společnosti BIMsoft jsme se zaměřeli na 3 základní značky BIM softwarů( archicad, revit, allplan) pro které jsem začali nabízet komplexní služby z hlediska BIM prostředí. Od samotné analýzy sortimentu výrobce, dále pak samotnou realizaci převedení sortimentu do BIM modelů až po samotnou distribuci těchto BIM prvků skrze marketingové kanály jednotlivých výrobců BIM softwarů a e-kanalů společnosti BIMsoft. Společnost BIMsoft jako jediný vývojářský tým v České Republice vyvýjí podle nejnovějších standartů Open BIM

Struttura in metallo trattato con cataforesi e verniciato a polvere nei colori avorio o grafite, puntali in materiale plastico. I cuscini di seduta, di schienale e i braccioli sono in poliuretano indeformabile schiumato a freddo e trattato idrorepellente, sono rimovibili e sono calzati direttamente sulla struttura. Il rivestimento è sfoderabile ed è realizzato nei tessuti per esterno Light, Luz o Rope T. Per garantire maggior comfort, è consigliato l’utilizzo di cuscini di appoggio. Disponibile un winter set di protezione.

La struttura interna è costituita da sfere di polistirolo contenute in una fodera di tessuto spaziato. Il rivestimento, completamente sfoderabile, può essere realizzato nei tessuti per esterno Light, Rope M e Aquatech. Disponibile un winter set di protezione.

La struttura interna è costituita da sfere di polistirolo contenute in una fodera di tessuto spaziato. Il rivestimento, completamente sfoderabile, può essere realizzato nei tessuti per esterno Light, Rope M e Aquatech. Disponibile un winter set di protezione.

Struttura in metallo trattato con cataforesi e verniciato a polvere nei colori avorio o grafite, puntali in materiale plastico. I cuscini di seduta, di schienale e i braccioli sono in poliuretano indeformabile schiumato a freddo e trattato idrorepellente, sono rimovibili e sono calzati direttamente sulla struttura. Il rivestimento è sfoderabile ed è realizzato nei tessuti per esterno Light, Luz o Rope T. Per garantire maggior comfort, è consigliato l’utilizzo di cuscini di appoggio. Disponibile un winter set di protezione.

La struttura interna è costituita da sfere di polistirolo contenute in una fodera di tessuto spaziato. Il rivestimento, completamente sfoderabile, può essere realizzato nei tessuti per esterno Light, Rope M e Aquatech. Disponibile un winter set di protezione.