2D floor plan symbol of embankment

Multi-story elevator shaft with elevator car.

Tree with floor plan symbol, plus choice of photos for use in 3D; photo automatically faces camera direction.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Floor-mounted bidet with different effluent types and minimal space.

Different types of 2D floor drain symbol.

2D only.

2D only.

2D only.

parametric floor mat for entries of houses; interface language: german Object to create rectangular floormats with frame. Dimensions, materials and fills are parametric. For insertion into existing slabs please use SEO function.

WC for the disabled. Editable with MEP Modeler.

Audi with floor plan symbol, plus choice of photos for use in 3D; photo automatically faces camera direction.

Mercedes with floor plan symbol, plus choice of photos for use in 3D; photo automatically faces camera direction.

Projector screen, floor or wall mounted, or tripod.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Evergreen tree with adjustable trunk and different floor plan symbols.

Pine tree with variable floor plan symbols.

This object uses manufacturer specific information, much of which is typical for the US market. It can also serve as a GDL template for quickly creating other bath fixtures by drawing your own 2D Fragments and substituting your own geometry in the 3D subroutines. Also, note the special "2D" and "3D" options. * Place using Rough-in Center line or Clearance., * 2D "Foot Print View is helpful for coordinating floor tile installations.

Multi-story elevator shaft with elevator car.

Different types of 2D floor drain symbol.

Fan coil with legs.

2D only.

2D only.

2D only.

This BIM object is produced in conjunction with Laattapiste - Faucet is at its best as a small sculpture that complements the pool. High-quality faucet will last for decades, so it is good to choose a faucet that is not only practical to please the eye. German Hansgrohe's wide and varied range you will surely find your style and suits your needs the tap. Uniting your bathroom you create, select, and tap the jet from the same series.

The NORTEC raised floor system offers impressive in-built properties and truly state-of-the-art technology. It is the ideal product for almost any field of application. NORTEC floor panels give superb underfoot comfort. They are manufactured from calcium sulphate (gypsum): a non-combustible material with superlative structural and physical properties. This product also offers outstanding levels of soundproofing. As a manufacturer, we can determine the choice of raw materials used. The Institute of Building Biology in Rosenheim recommends NORTEC as a biologically-neutral building material. Our gypsum panels are virtually emission-free.

The easy chair Palma is designed by Khodi Feiz. Palma is inspired by the cupped palm of a hand, symbolically cradling the body that sits in it. The chair's elegant form is captured in the seat, backrest and armrests as a single graceful movement. With its

Very close to how nature itself designs, and yet based on simple principles, this lamp has a harmonic and natural shape. The trunk and branches, made of round birch parts with wedged ends, join without glue and the leafs consist of thin unbleached and s

The Tork floor stand for large rolls is an ergonomically designed mobile dispenser with safe and reliable tear off, easy load feature and extra stable construction, which is important in many industrial environments. [LIST] High capacity on wheels: Fe

Soundwave® Stand is designed by Richard Hutten. Soundwave® Stand is a new tool for architects and consists of a frame onto which all Offecct’s sound panels in the Soundwave®-series can be fixed. The device fits discretely into all environments without bei

The Tork floor stand for large rolls is an ergonomically designed mobile dispenser with safe and reliable tear off, easy load feature and extra stable construction, which is important in many industrial environments. [LIST] High capacity on wheels: Fe

Tork Performance is a new generation of dispensers born to perform. All dispensers are optimised for Tork wipers and when combined they become the perfect performance tools. They present a professional image that your customers and staff will appreciate as well as supporting the user in the task at hand. Whether it is greater productivity, increased quality, improved hygiene, better ergonomics, cost in use or uncompromising safety you are looking for, this range will deliver wherever you are. Floor stand for large rolls (W1 System) is ergonomically designed. Has a safe and reliable tear-off system. Easy to load and stable construction. Suitable for all high use areas where a large capacity mobile solution is needed.

Very close to how nature itself designs, and yet based on simple principles, Leaf Lamp has a harmonic and natural shape. The tree trunk and wedged branches are made from Swedish birch, and can be joined without any glue. The tree shares its inner energy t

Floor standing rack

Multi-story elevator shaft with elevator car.

WC for the disabled. Editable with MEP Modeler.

WC for the disabled. Editable with MEP Modeler.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Inert incobustible calcium sulphate and fibers core panels, density between 1.100 and .1200 kg/m3, totally encased in two steel galvanized tray, thickness between 0,40 and 0,45 mm, assembled with vinyl gluing and double folded with patented perimeter join.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Chipboard FSC® core panels, density between 650 and 700 kg/m3, totally encased in two steel galvanized tray, thickness between 0,40 and 0,45 mm, assembled with vinyl gluing and double folded with patented perimeter joint, bare finishing for loose-lay covers.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Chipboard FSC® core panels, density between 700 and 750 kg/m3, totally encased in two steel galvanized tray, thickness between 0,40 and 0,45 mm, assembled with vinyl gluing and double folded with patented perimeter joint, bare finishing for loose-lay covers.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Inert incobustible calcium sulphate and fibers core panels, density between 1.100 and 1.200 kg/m3, totally encased in two steel galvanized tray, thickness between 0,40 and 0,45 mm, assembled with vinyl gluing and double folded with patented perimeter join.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Chipboard FSC® core panels, density between 650 and 700 kg/m3, totally encased in two steel galvanized tray, thickness between 0,40 and 0,45 mm, assembled with vinyl gluing and double folded with patented perimeter joint, bare finishing for loose-lay covers.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Chipboard FSC® core panels, density between 650 and 700 kg/m3, totally encased in two steel galvanized tray, thickness between 0,40 and 0,45 mm, assembled with vinyl gluing and double folded with patented perimeter joint, bare finishing for loose-lay covers.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Chipboard FSC® core panels, density between 700 and 750 kg/m3, totally encased in two steel galvanized tray, thickness between 0,30 and 0,35 mm, assembled with vinyl gluing and double folded with patented perimeter joint, bare finishing for loose-lay covers.

Raised Access Floors Modular Systems to provide the best quality in the world of access flooring components in both commercial and residential buildings, thanks to our full encapsulated panels and our expertise and technical know-how we can ensure and provide the right choice of floor systems to face the challenge of new technologies in building construction. Inert incobustible calcium sulphate and fibers core panels, density between 1.500 and 1.600 kg/m3, totally encased in two steel galvanized tray, thickness between 0,40 and 0,45 mm, assembled with vinyl gluing and double folded with patented perimeter join.

2D floor spot lamp

Audi with floor plan symbol, plus choice of photos for use in 3D; photo automatically faces camera direction.

Different types of 2D floor mounted and wall-mounted bidets on top, side or front view, with optional tap.

Mercedes with floor plan symbol, plus choice of photos for use in 3D; photo automatically faces camera direction.

Projector screen, floor or wall mounted, or tripod.

Tree with floor plan symbol, plus choice of photos for use in 3D; photo automatically faces camera direction.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Deciduous tree with adjustable trunk, branches, leaves, crown density and variable floor plan symbols.

Evergreen tree with adjustable trunk and different floor plan symbols.

Pine tree with variable floor plan symbols.

Sidney SKIRTING / 450 x 80. Floor Tiles. Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Besam VersaMax ICU Swing provides convenient functionality, easy-to-use breakout, an extremely wide door opening and no floor tracks. The Besam VersaMax ICU Swing meets all requirements of superior performance in a critical care environment. Besam VersaMax ICU Swing is available in a smoke rated package certified to UL 1784. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

Sidney BASE / 310 x 610. Floor Tiles. Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Sidney BASE / 450 x 450. Floor Tiles. Slip resistance (pendulum): Clase 1 (ENV 12633). Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit,

To reduce impact and ambient noise and enhance underfoot comfort and wellbeing, Tarkett’s Silencio xf™2 offers an acoustic linoleum solution with sound reduction of 18dB. With a total thickness of 3.8mm, it’s made in a two-layer construction of 2.5mm linoleum with a 1.3mm pre-bonded foam underlay. ■ Floor covering with 18dB sound reduction ■ 2.5mm Linoleum Veneto xf² on jute backing ■ 1.3mm recycled polyurethane foam backing ■ Xf² surface treatment for a smoother appearance and improved performance ■ Easy cleaning and maintenance, no need for polish and wax, for highly cost effective flooring ■ Available in all Veneto colours.

Sidney BASE / 250 x 400. Floor Tiles. Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Sidney BASE /316 x 316. Floor Tiles. Slip resistance (pendulum): Clase 1 (ENV 12633). Colours/Finishes: 041 Beige, 251 Brown, 021 Grey, 101 Graphit

Bathtub made of SENTEC solid surface material, casted Drop-in version for the right corner, without panel With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Freestanding bathtub made of SENTEC solid surface material, with not removable panels With overflow slot at long side and tap bank at opposite side With pre-installed lifting system to move the bathtub aside in case of maintenance, with floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted for the left corner, with not removable L-panel right With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Freestanding bathtub made of SENTEC solid surface material, with not removable panels Overflow slot and tap bank at feet side With pre-installed lifting system to move the bathtub aside in case of maintenance, with floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted for the right corner, with not removable L-panel left With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Freestanding bathtub made of SENTEC solid surface material, with not removable panels With overflow slot at long side and tap bank at opposite side With pre-installed lifting system to move the bathtub aside in case of maintenance, with floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted Drop-in version for the left corner, without panel With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

[LIST] Thermal insulated automatic folding door. Suitable for external doors or internal doors in narrow passageways The first folding door that provides for maximum clear opening width of 2.4m in tight spaces. FFT FLEX Green offers outstanding thermal separation, a quiet, dynamic operation and enhanced wind load resistance. It is particularly suitable for emergency exits and escape routes. Operator height 155 mm (internal view face) Profile system DORMA FLEX Green with thermal break Mounting method Passageway/corridor installation or wall/face-fixed installation, for doorsets that are either unilateral or bi-parting in their method of operation Suitable for emergency exits and escape routes in accordance with DIN 18650 and EN 16005 Max. opening width 2400 mm (bi-parting), 1200 mm (unilateral) Max. clear passage height 2500 mm Floor guide track surface or underfloor as required Electromechanical locking device optional, floor locks and hook latch lock optional [/LIST]

[LIST] Horizontal sliding wall with single-point stainless steel fixings The HSW-GP is characterised by the use of MANET single-point fixings in combination with a standard track rail. The system’s high-quality stainless steel components and flush-mounted single-point fixings perfectly match the demands of modern architecture. Different parking layouts available Glass types 10 mm or 12 mm toughened safety glass Max. system height 3000 mm Max. panel width 1200 mm. The width of all panels must be uniform. Max. panel weight 100 kg (depends on type of panel) Panel types Single action end panel, Double action end panel, Fixed screen, Sliding panel Suitable for both inline and curved configurations. Benefits: Minimal hardware maximizes all-glass look. No floor track. Stainless steel fittings provide flush-mounted attachments compatible with contemporary architecture. [/LIST]

[LIST] Floor-Concealed Door Closer The BTS 80 Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its use where a larger closer would be prohibitive. Versatility allows installation in thin slab concrete subfloor construction. A wide selection of interchangeable spindles makes the BTS80 suitable for virtually any floor covering or threshold application. Dimensions Length 341 mm, Width 78 mm, Height 60 mm Spring strength (EN) 3/4/6 Max. leaf weight 300 kg Suitable for single and double action doors Floor spring tested to EN 1154 Mechanical backcheck Concealed installation [/LIST]

[LIST] Revolving doors with 4 leafs The KTV revolving door range is designed for installation in entrance areas where interior environmental control coupled with elegant aesthetics are desired. Available as Manual, Automatic, Positional or Servomatic, the KTV range offers flexibility in design and function. Operation Modes Manual, Automatic, Positional and Servomatic operation Diamater any from 2000 mm to 3400 mm. Standard fixed diameters of 3600 mm and 3800 mm are also available. Floor mounted or ceiling mounted drive units for powered doors Glazed or solid canopy Robust framing or fine frame option Optional: Night shields for additional protection Integrated with DORMA CODIC MasterCard or MATRIX Professional Access Control solutions Certification BS EN 16005 Benefits are flexible design options to meet project specific requirments, DORMA KTV revolving doors effectively reduce noise, dust and dirt as well as greatly contributing to a reduction in building climate control when compared with conventional automatic doors. [/LIST]

[LIST] Revolving doors with 3 leafs The KTV revolving door range is designed for installation in entrance areas where interior environmental control coupled with elegant aesthetics are desired. Available as Manual, Automatic, Positional or Servomatic, the KTV range offers flexibility in design and function. Operation Modes Manual, Automatic, Positional and Servomatic operation Diamater any from 2000 mm to 3400 mm. Standard fixed diameters of 3600 mm and 3800 mm are also available. Floor mounted or ceiling mounted drive units for powered doors Glazed or solid canopy Robust framing or fine frame option Optional: Night shields for additional protection Integrated with DORMA CODIC MasterCard or MATRIX Professional Access Control solutions Certification BS EN 16005 Benefits are flexible design options to meet project specific requirments, DORMA KTV revolving doors effectively reduce noise, dust and dirt as well as greatly contributing to a reduction in building climate control when compared with conventional automatic doors [/LIST]

[LIST] Revolving doors with 3 or 4 leafs The KTV revolving door range is designed for installation in entrance areas where interior environmental control coupled with elegant aesthetics are desired. Available as Manual, Automatic, Positional or Servomatic, the KTV range offers flexibility in design and function. Operation Modes Manual, Automatic, Positional and Servomatic operation Diamater any from 2000 mm to 3400 mm. Standard fixed diameters of 3600 mm and 3800 mm are also available. Floor mounted or ceiling mounted drive units for powered doors Glazed or solid canopy Robust framing or fine frame option Optional: Night shields for additional protection Integrated with DORMA CODIC MasterCard or MATRIX Professional Access Control solutions Certification BS EN 16005 Benefits are flexible design options to meet project specific requirments, DORMA KTV revolving doors effectively reduce noise, dust and dirt as well as greatly contributing to a reduction in building climate control when compared with conventional automatic doors. [/LIST]

Glass pony wall Total dimensions: 48" H x 10" W x 96" L Must be anchored to floor Approx. footprint: 10" x 96" Glass panel dimensions: 91" W x 44" H Ideal for room divider or reception desk back feature Poured Glass has 3D appearance (3) edges polished (two sides and top) Millwork included (Paint Grade) Unit painted to match C3 colors standard One tube of clear silicone included to caulk glass into millwork Three-week lead time; Four-week lead time for Glass

A bentwood bench with backrest, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. Nova C with Backrest standards are one-meter straight modules and 45 degree curved modules as single or double. The m

Gate is a linkable bench system for public areas. Benches available in two straight (GS) and two curved (GR) basic units. Use the Gate basic units to form rows that are straight, curved or at right angles to suit their setting. These can be fitted with backrests, and/or seats as required. Use our design tool to configure your own Gate! Standard spacing gives a centre-to-centre seat space of 600 mm, but this spacing may be varied to accommodate more or fewer seats as desired. Benches may be anchored to the floor. Design: Börge Lindau & Johan Lindau.

The leg base is gently shaped to be kind to your feet and rises off the floor in a smooth arch. The tapering, open leg base provides a light and airy, yet stable impression. Corners and edges are rounded to provide a welcoming feeling when approaching the table. It must feel nice to sit next to Annie. This version of Annie is an extensible table. The table is available in following dimensions, 140x90 + 2 x 50 cm eller 180 x 90 + 2 x 50 cm. As an option it can be height adjustable.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

T-shirt Seater is a bench for indoor public places, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. The T-shirt series are happy and colourful furniture using an upscaled principle of the rag-rug

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

Cross (Roger Persson, 2007) is the pedestal table with wooden feeling! The table differs from many pedestal tables with its foot of solid wood that kind of lifts from the floor. It comes in heights of 460, 530, 620, 720, 900 and 1100 mm with a choice of s

A classic drop-leaf table, with a solid, powerful design. The longitudinal central section did not just give the table stability: formerly you could rest your feet on it, thus avoiding contact with the cold floor. Available in natural lacquer, oil or stain. Design: Nils-Göran Gustafsson.

The StoFloor Public method 405 is an ultrathin polyurethane floor system with acoustic dampening attributes. The system is solvent free and creates elastic, very comfortable to walk on surfaces. Due to its highly efficient coating properties this method has a high impact and shock resistance with a smooth, easy to clean surface. The Sto Flooring Method 405 is suited for moderate loads (e.g. hand trucks, carts, pedestrian traffic, etc...) Examples of application areas are public spaces such as schools, day care centers, offices and housing. The system is available in a wide range of colors. This BIM object is optimized for the northern European market. For additional information please contact Sto Scandinavia.

T-shirt Seater is a bench for indoor public places, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. The T-shirt series are happy and colourful furniture using an upscaled principle of the rag-rug

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

Kabe Mat Original Color with grey or red rubber, or combined with Kabe Mat Original with black rubber. The primary task of preventing dirt and moisture reaching the floor is done just as well. The difference is the choice of colours or a simple patterned

A double sided bentwood bench without backrest, which has the ability to seamlessly wind over the floor using standard modules or custom curvature and length. Nova C standards are one-meter straight sections and 45 degree curved modules, with one-meter si

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The BIM-models contains 6 different lengths (600,700,800,900,1000 and 1200mm) and two different outlets (Ø50 and Ø75). The flow capacity is 0,8l/s. Purus Line is for installation in concrete or wooden joists and use with floor tiles unless otherwise stated. Purus designed floor gullies are an example of how creativity and design can revolutionize an industry. The technology, quality and functionality are equally as reliable as our other floor gullies, but the innovative design provides a more personal touch in the bathroom. Purus designed floor gullies are available in a variety of shapes and colors and offer a high degree of freedom when installing the floor gully in wet rooms.The channel/sub-section is in stainless steel and the outlets is in plastic.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

T-shirt Seater is a bench for indoor public places, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. The T-shirt series are happy and colourful furniture using an upscaled principle of the rag-rug

Satellite is an easy chair for activity based spaces, a spinning easy chair for a digital lifestyle with high comfort and round playful features. – Architects always draw circles very fast to indicate where to position chairs on their floor plans. I thou

Annie is a "lively" table with proven functional and secure construction. The foot is gently shaped to be kind to your feet and lift off the floor in a gentle curve. The tapered, openwork gable gives a light and airy, but while steadily impression. Corners and edges are rounded to provide a Please feel when approaching table. It should feel nice to sit next to Annie! Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

T-shirt Seater is a bench for indoor public places, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. The T-shirt series are happy and colourful furniture using an upscaled principle of the rag-rug

The leg base is gently shaped to be kind to your feet and rises off the floor in a smooth arch. The tapering, open leg base provides a light and airy, yet stable impression. Corners and edges are rounded to provide a welcoming feeling when approaching the table. It must feel nice to sit next to Annie. This version of Annie is an extensible table. The table is available in following dimensions, 140x90 + 2 x 50 cm eller 180 x 90 + 2 x 50 cm. As an option it can be height adjustable.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

A classic drop-leaf table, with a solid, powerful design. The longitudinal central section did not just give the table stability: formerly you could rest your feet on it, thus avoiding contact with the cold floor. Available in natural lacquer, oil or stain. Design: Nils-Göran Gustafsson.

A bentwood bench with backrest, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. Nova C with Backrest standards are one-meter straight modules and 45 degree curved modules as single or double. The m

The BIM-models contains 6 different lengths (600,700,800,900,1000 and 1200mm) and two different outlets (Ø50 and Ø75). The flow capacity is 0,8l/s. Purus Line is for installation in concrete or wooden joists and use with floor tiles unless otherwise stated. Purus designed floor gullies are an example of how creativity and design can revolutionize an industry. The technology, quality and functionality are equally as reliable as our other floor gullies, but the innovative design provides a more personal touch in the bathroom. Purus designed floor gullies are available in a variety of shapes and colors and offer a high degree of freedom when installing the floor gully in wet rooms.The channel/sub-section is in stainless steel and the outlets is in plastic.

Purus Mini Brage 50 The Purus Mini Brage, available with outlet diameters of 50mm and 110mm, is our Mini Series vertical outlet solution. It comes complete with our patented NOOD trap which is spring loaded so no foul air can come through the trap even when dry! The water trap is easily removed for cleaning by pulling up the automatically raised handle. The Mini Brage works as an outlet without the water trap. The plastic circular grate is standard for a vinyl floor situation but can be upgraded to a circular stainless steel grate which comes in a variety of designs; alternatively, a square grate in a variety of designs can be used with a tiled floor. Mini Brage 50 and Mini Brage 110 floor drains with bottom outlet of polypropylene (PP). Capacity acc. to EN 1253 – outlet 50mm, 48 l/min (0,8l/s). The Purus Mini Brage has a diameter of 130mm. Complete floor drain incl. flexi-NOOD trap, grating and clamping ring. Incl. 50mm to 1½” push fit to solvent weld ABS adapter.

A classic drop-leaf table, with a solid, powerful design. The longitudinal central section did not just give the table stability: formerly you could rest your feet on it, thus avoiding contact with the cold floor. Available in natural lacquer, oil or stain. Design: Nils-Göran Gustafsson.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

Pure design Encompassing condensation-free flushing cistern Silent filling Raised button Adjustable water connection Seat height 420 mm Concealed installation to floor Can be fitted with armrest 3055 Glazed under the rim Multiple seat options C+ as option

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

Glass wool helps to significantly improve the acoustics of a building with Class A sound absorbtion. Isolation of separating floor to basement, garage or other unheated spaces can be done from below and afterwards if need be. This contributes to the floo

The StoFloor Public method 7008 is a ventilated floor system with a mineral based surface. The system is developed for contaminated concrete surfaces or mold damaged areas. It is solvent free and can be used in combination with other coating systems. The StoFloor Public method 7008 is suited for moderate loads (e.g. hand trucks, carts, pedestrian traffic etc...) Examples of application areas are schools, exhibition spaces, shops, car showrooms and production surfaces. The system is available in a wide range of colors. This BIM object is optimized for the northern European market. For additional information please contact Sto Scandinavia.

Innovation C is a multi-function swivel seat. In Innovation C you can sit as you choose, there is no back and no front, the backrest can also be used as a table. Place your lap-top on the add-on table and use the chair as a work-station. Innovation C is easily placed in many different environments, from airports to waiting rooms to libraries and schools. Use our design tool to create different settings with Innovation C. Innovation C has an upholstered seat/back/table in moulded CMHR polyurethane foam covered with fabric or leather. Swivel base, also available with auto-return. The chair can also be anchored to the floor. Innovation C is eco-labelled with the Nordic Swan in the following fabrics; Europost, Gaja, Fame, Hallingdal, Bubbles, Animé. Design: Fredrik Mattson.

Purus Minimax 50 The Purus Minimax is one of the world’s shallowest (70mm plus 6mm fall) wetroom drain incorporating a NOOD no-odour trap without a water seal. Due to our patented NOOD trap which is spring loaded no foul air can come through the trap even when dry! The water trap is easily removed for cleaning by pulling up the automatically raised handle. The Minimax works as an outlet without the water trap. The plastic circular grate is standard for a vinyl floor situation but can be upgraded to a circular stainless steel grate which comes in a variety of designs; alternatively, a square grate in a variety of designs can be used with a tiled floor. Minimax 50 floor drain with side outlet of polypropylene (PP). Capacity acc. to EN 1253 – outlet 50mm, 48 l/min (0,8l/s). The Purus Minimax has a diameter of 130mm – outlet dim 50mm. Complete floor drain incl. NOOD trap, grating and clamping ring. Incl. 50mm to 1½” push fit to solvent weld ABS adapter.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The StoFloor Public method 500 “Compact flooring” is a colored, sand coated floor system with a transparent epoxy finish. The system is solvent free and suited for high loads (e.g. forklifts, cars, etc...) Due to the epoxy’s chemical properties and the high amount of sand this system achieves very high impact, chemical, and UV resistance. Examples of application areas are workshops, warehouses, commercial kitchens, showrooms, exhibition spaces and industrial areas. The system is available in a wide range of colors. This BIM object is optimized for the northern European market. For additional information please contact Sto Scandinavia.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

Annie is a "lively" table with proven functional and secure construction. The foot is gently shaped to be kind to your feet and lift off the floor in a gentle curve. The tapered, openwork gable gives a light and airy, but while steadily impression. Corners and edges are rounded to provide a Please feel when approaching table. It should feel nice to sit next to Annie! Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Soundwave® Wall is the largest acoustic panel made by Offecct to date, and is built upon the existing standard measures set by Offecct’s successful acoustic panels collection Soundwave®. – Soundwave® Wall stretches from floor to ceiling, it’s a panel tha

T-shirt Seater is a bench for indoor public places, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. The T-shirt series are happy and colourful furniture using an upscaled principle of the rag-rug

The leg base is gently shaped to be kind to your feet and rises off the floor in a smooth arch. The tapering, open leg base provides a light and airy, yet stable impression. Corners and edges are rounded to provide a welcoming feeling when approaching the table. It must feel nice to sit next to Annie. This version of Annie is an extensible table. The table is available in following dimensions, 140x90 + 2 x 50 cm eller 180 x 90 + 2 x 50 cm. As an option it can be height adjustable.

A classic drop-leaf table, with a solid, powerful design. The longitudinal central section did not just give the table stability: formerly you could rest your feet on it, thus avoiding contact with the cold floor. Available in natural lacquer, oil or stain. Design: Nils-Göran Gustafsson.

Dunder is an extendable modular sofa that adapts easily and elegantly to the setting in which it is used. Dunder modular seating consists of five different sections – middle, corner, left-hand end unit, right-hand end unit and footstool. The footstool can also be used on its own as a freestanding floor cushion. Design: Stefan Borselius.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

Serena means serene in Italian. It is therefore suitable as an overall name for the products in this range. The furniture in the Serena range has a simple, geometrical design with high detail finish and material quality. All items feature a metal foot, a detail intended to visually “lift” the furniture from the floor. The drawers are adjustable and self-closing, with anti-trapping device. All drawer fronts and drawer sides are made from solid birch.Design: Marit Stigsdotter.

Annie is a "lively" table with proven functional and secure construction. The foot is gently shaped to be kind to your feet and lift off the floor in a gentle curve. The tapered, openwork gable gives a light and airy, but while steadily impression. Corners and edges are rounded to provide a Please feel when approaching table. It should feel nice to sit next to Annie! Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

A classic drop-leaf table, with a solid, powerful design. The longitudinal central section did not just give the table stability: formerly you could rest your feet on it, thus avoiding contact with the cold floor. Available in natural lacquer, oil or stain. Design: Nils-Göran Gustafsson.

A bentwood bench with backrest, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. Nova C with Backrest standards are one-meter straight modules and 45 degree curved modules as single or double. The m

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

A double sided bentwood bench without backrest, which has the ability to seamlessly wind over the floor using standard modules or custom curvature and length. Nova C standards are one-meter straight sections and 45 degree curved modules, with one-meter si

The StoFloor Public method 7015 is a thin, solvent free floor system coated with polyurethane, with acoustic- dampening attributes. Due to its highly efficient coating properties the system has high impact resistance with a smooth, easy to clean surface. The StoFloor Public method 7015 is suited for moderate loads (e.g. hand trucks, carts, pedestrian traffic etc,...) Examples of application areas are schools, exhibition spaces, shops, car showrooms and production surfaces. The system is available in a wide range of colors. This BIM object is optimized for the northern European market. For additional information please contact Sto Scandinavia.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

The leg base is gently shaped to be kind to your feet and rises off the floor in a smooth arch. The tapering, open leg base provides a light and airy, yet stable impression. Corners and edges are rounded to provide a welcoming feeling when approaching the table. It must feel nice to sit next to Annie. This version of Annie is an extensible table. The table is available in following dimensions, 140x90 + 2 x 50 cm eller 180 x 90 + 2 x 50 cm. As an option it can be height adjustable.

Annie is a "lively" table with proven functional and secure construction. The foot is gently shaped to be kind to your feet and lift off the floor in a gentle curve. The tapered, openwork gable gives a light and airy, but while steadily impression. Corners and edges are rounded to provide a Please feel when approaching table. It should feel nice to sit next to Annie! Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Serena means serene in Italian. It is therefore suitable as an overall name for products in this range. The furniture in this range has a simple, geometrical design with high detail fi nish and material quality. All items feature a metal foot, a detail intended to visually “lift” the furniture from the fl oor.A pretty bedside table which is easy to place. Gives space for the necessary next to the bed. The drawers are adjustable and self-closing, with anti trapping device. All drawer fronts and drawer sides are made from solid birch. The small metal foot at the bottom of Serena is an attractive detail intended to visually “lift” the furniture from the floor. The Serena range also includes a chest of drawers, mirror, wardrobe and bedroom furniture. Supplied ready-assembled. Design: Marit Stigsdotter.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

A bentwood bench with backrest, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. Nova C with Backrest standards are one-meter straight modules and 45 degree curved modules as single or double. The m

A bentwood bench with backrest, with the ability to seamlessly wind over the floor using standard modules or custom curvature and length. Nova C with Backrest standards are one-meter straight modules and 45 degree curved modules as single or double. The m

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

Purus Mini Brage 110 The Purus Mini Brage, available with outlet diameters of 50mm and 110mm, is our Mini Series vertical outlet solution. It comes complete with our patented NOOD trap which is spring loaded so no foul air can come through the trap even when dry! The water trap is easily removed for cleaning by pulling up the automatically raised handle. The Mini Brage works as an outlet without the water trap. The plastic circular grate is standard for a vinyl floor situation but can be upgraded to a circular stainless steel grate which comes in a variety of designs; alternatively, a square grate in a variety of designs can be used with a tiled floor. Mini Brage 110 floor drains with bottom outlet of polypropylene (PP). Capacity acc. to EN 1253 – outlet 110mm, 48 l/min (0,8l/s). The Purus Mini Brage has a diameter of 130mm. Complete floor drain incl. flexi-NOOD trap, grating and clamping ring.

Sparta is something unusual; a comfortable folding chair that functions well – both folded and unfolded. Sparta only measures 27 mm when folded, that makes 100 chairs in 2.7 m! Sparta is perfect for short stay seating and with its strong design profile it is as beautiful in use as when not in use. Sparta can be stored by either hanging on a wall, placed in a trolley or in a floor rack. Use our design tool to trydifferent colours on Sparta. Sparta has a reversible seat. Sparta is available with a wall hook and a trolley for 26 chairs. Design: Börge Lindau.

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space.The shelves and other metal parts are available powder coated in Hylltekniks colours: T1-w

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

IN-TANK - Floor standing toilet with integrated tank within the unit. Includes seat and cover. Needs power supply.

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

The powerful high-insulating lining in combination with an insulating air gap prevents the need to switch off when you pass a floor, and you can under certain circumstances build the chimney directly to the wall. You have the ability to influence the appearance of the chimney. In the basement and the attic you can, for convenience, leave the chimney breast untreated. A chimney stretching through several floors, you can paint to make it fit into the environment. The part that is visible above the roof, you can either polish, dress in with sheet metal or brick. Connection to the fireplace can be done anytime and anywhere along the chimney, it allows you to build your chimney and fireplace choose afterwards. Courtesy by rakennustieto Finland. These downloadable objects are only available in Finnish at the moment.

The roof and the floor of the lockers are perforated to improve ventilation. The lockers can be connected with air ducts. Standard lockers with flat roofs and slanted roofs are available by request. Courtesy by rakennustieto Finland. These downloadable objects are only available in Finnish at the moment.

PARQUET 1934MIX : TO MEET YOUR STYLE The collection of wood floorings in oak 1934MIX makes full use of the basic parquet floor colour program, and mix them to create 6 new products. For each wood floor, XILO1934 introduces different specific colors on fixed planks in 10 cm width, to emphasize the chromatic aspect at the best. Six different wood floors designed to meet so many different moods and styles: from modern to minimalist, from ethnic to fusion and from urban to country. The result is a wood flooring that easily adapts to your personal style and also ensures low maintenance and high resistance, thanks to a water-based finishing. XILO1934, once again, it reacts with a collection of wooden floors that uniquely identifies the brand. At the base of 1934mix there is, in fact, a unique and original work of composition.

PARQUET 1934MIX : TO MEET YOUR STYLE The collection of wood floorings in oak 1934MIX makes full use of the basic parquet floor colour program, and mix them to create 6 new products. For each wood floor, XILO1934 introduces different specific colors on fixed planks in 10 cm width, to emphasize the chromatic aspect at the best. Six different wood floors designed to meet so many different moods and styles: from modern to minimalist, from ethnic to fusion and from urban to country. The result is a wood flooring that easily adapts to your personal style and also ensures low maintenance and high resistance, thanks to a water-based finishing. XILO1934, once again, it reacts with a collection of wooden floors that uniquely identifies the brand. At the base of 1934mix there is, in fact, a unique and original work of composition.

PARQUET 1934MIX : TO MEET YOUR STYLE The collection of wood floorings in oak 1934MIX makes full use of the basic parquet floor colour program, and mix them to create 6 new products. For each wood floor, XILO1934 introduces different specific colors on fixed planks in 10 cm width, to emphasize the chromatic aspect at the best. Six different wood floors designed to meet so many different moods and styles: from modern to minimalist, from ethnic to fusion and from urban to country. The result is a wood flooring that easily adapts to your personal style and also ensures low maintenance and high resistance, thanks to a water-based finishing. XILO1934, once again, it reacts with a collection of wooden floors that uniquely identifies the brand. At the base of 1934mix there is, in fact, a unique and original work of composition.

a product of extensive research, the top-of-the-range Case System 2.3 , teams the ever growing demand for ultra sophisticated design with intelligent and innovative technical solutions. To maintain an image of absolute minimalism the handle has been integrated into the doors where it remains invisible. The stainless steel worktop rests on a light, aluminum frame creating a void between base and top. Other elegant technical solutions such as the Blu-motion seal-mechanism that allows the doors of the units to recede softly and silently close are standard. This truly pioneering design introduces the suspended base module, kept in suspension by a built-in L-shaped steel joint. Supported on one side by a low open faced module and fixed to the floor behind a regular base unit on the other the units appear to be weightless. Whilst fulfilling all practical necessities this modular entity contradicts all traditional ideas of a kitchen.

PARQUET 1934MIX : TO MEET YOUR STYLE The collection of wood floorings in oak 1934MIX makes full use of the basic parquet floor colour program, and mix them to create 6 new products. For each wood floor, XILO1934 introduces different specific colors on fixed planks in 10 cm width, to emphasize the chromatic aspect at the best. Six different wood floors designed to meet so many different moods and styles: from modern to minimalist, from ethnic to fusion and from urban to country. The result is a wood flooring that easily adapts to your personal style and also ensures low maintenance and high resistance, thanks to a water-based finishing. XILO1934, once again, it reacts with a collection of wooden floors that uniquely identifies the brand. At the base of 1934mix there is, in fact, a unique and original work of composition.

PARQUET 1934MIX : TO MEET YOUR STYLE The collection of wood floorings in oak 1934MIX makes full use of the basic parquet floor colour program, and mix them to create 6 new products. For each wood floor, XILO1934 introduces different specific colors on fixed planks in 10 cm width, to emphasize the chromatic aspect at the best. Six different wood floors designed to meet so many different moods and styles: from modern to minimalist, from ethnic to fusion and from urban to country. The result is a wood flooring that easily adapts to your personal style and also ensures low maintenance and high resistance, thanks to a water-based finishing. XILO1934, once again, it reacts with a collection of wooden floors that uniquely identifies the brand. At the base of 1934mix there is, in fact, a unique and original work of composition.

a product of extensive research, the top-of-the-range Case System 2.3 , teams the ever growing demand for ultra sophisticated design with intelligent and innovative technical solutions. To maintain an image of absolute minimalism the handle has been integrated into the doors where it remains invisible. The stainless steel worktop rests on a light, aluminum frame creating a void between base and top. Other elegant technical solutions such as the Blu-motion seal-mechanism that allows the doors of the units to recede softly and silently close are standard. This truly pioneering design introduces the suspended base module, kept in suspension by a built-in L-shaped steel joint. Supported on one side by a low open faced module and fixed to the floor behind a regular base unit on the other the units appear to be weightless. Whilst fulfilling all practical necessities this modular entity contradicts all traditional ideas of a kitchen.

PARQUET 1934MIX : TO MEET YOUR STYLE The collection of wood floorings in oak 1934MIX makes full use of the basic parquet floor colour program, and mix them to create 6 new products. For each wood floor, XILO1934 introduces different specific colors on fixed planks in 10 cm width, to emphasize the chromatic aspect at the best. Six different wood floors designed to meet so many different moods and styles: from modern to minimalist, from ethnic to fusion and from urban to country. The result is a wood flooring that easily adapts to your personal style and also ensures low maintenance and high resistance, thanks to a water-based finishing. XILO1934, once again, it reacts with a collection of wooden floors that uniquely identifies the brand. At the base of 1934mix there is, in fact, a unique and original work of composition.

Light, open facade cladding which allows ventilation of the wall construction behind. Used as wall panels in parapet lots and floor and apartment separation. Supplements the existing VELFAC 200 system as a facade to get the most uniform and ha

Having designed drinking glasses for the Holmegaard glass works, Claus Bonderup continued his works in glass with the Selene luminaires, a series of pendants, chandeliers, table and floor as well as wall luminaires characterised by shades in opal-white, s

Floor lamps of the LEIRA family are unique due to the lightness of design. These lamps exist in three different makes: with a non-dimmable ballast, dimmable by means of a pushbutton, or automatically controlled by a presence and movement sensor. Lamps are fitted with TC-L sources and a micro-prismatic optical system; the optic effectiveness is 77%. Lamps are suitable for the lighting of offices and social areas or meeting and conference rooms. Type of installation: [LIST] Free-standing [/LIST]

A modern design with smooth surfaces and clean lines that fits seamlessly in your washroom. Create a great impression that boosts the high-quality image of your facility. Stylish stainless steel with anti finger print coating looks great and stays clean. [LIST] Easy to clean stainless steel with anti-fingerprint protection/coating - keeps the high class look for a better experience High capacity – ensures your guests that toilet paper will never run out Smart stub roll holder – reduces waste. Stub rolls can be used to the end. Optimal roll brake – Smooth dispensing and no paper on the floor [/LIST]

Press, design PetterssonRudberg (2015), is the result of an undertaking to construct a folding table made entirely out of wood. The challenge was to make a table that was lighter yet just as stable to use, just as simple to fold up and just as long-lasting as similar constructions. The tabletop is veneered with oak, birch, ash or finished in one of our standard stains on ash, black desktop and white or grey laminate. The table is supplied with a wooden edge strip or for a more durable tabletop, choose a plastic edge strip in white, grey or black. The solid wood legs are in oak, birch, ash or finished in one of our standard stains on ash and have felt floor protectors as standard. Optional extras are available in the form of castors, link fittings for connecting several tables, and a panel of sound-absorbent material that can be fitted to the underside of the tabletop. Also available is a storage trolley with locking wheels and a metal handle that can be placed either on the side or the short end. Press can be used either as a folding table that can be simply erected to provide a sturdy working surface, or as a more permanent wooden table that is easy to fold up and store out of the way when necessary. Press is an ideal solution in lecture halls, meeting rooms, lunch rooms, all types of conference facilities, schools, hotels, churches, etc.

Paradise Ladycare hygiene box, approx. 12 l. Floor-standing, wall-mounted or as Non-Touch version. With view-protection in lid, wall mount and Non-Touch wall mount with LED display (red/green). Motor-operated lid opening (3 seconds) and automatic closing (with NT version), manual lid opening and closing with floor-standing and wall-mounted versions. Container, lid and wall mount in white plastic. Wall mount with disengaging lock and key. Power supply for NT: 4x LR 14 batteries. Sensor range 1-7 cm with < 0.5 second reaction time. Comes complete with batteries, fastening materials, delivery and installation. A service subscription for the disposal of hygienic waste via the CWS Ladycare service can be concluded directly with CWS. Ladycare Boxes: Paradise Ladycare floor standing: 575000 Paradise Ladycare wall-mounted: 574000 Paradise Ladycare NT: 573000 Format: 345 x 525 x 200 mm

Waste paper bin in 23 l and 43 l versions. Made of plastic, with a removable lid featuring a concealed opening. Can be stood on the floor or mounted on a wall. Comes complete with fastening materials, delivery and installation. Waste Bins: Paradise Paper Bin 23l: 4302000 Format: 336 × 550 × 225 mm Weight: 1.68 Kg Paradise Paper Bin 43l: 4301000 Format: 425 × 565 × 285 mm Weight: 2.10 Kg Waste bags: various waste bags in different sizes and colours