*** freeFormWindow by Petri Leskinen 2006-2007 *** *** leskinen.petri@luukku.com *** to be edited in 3D- or section view by the hotspots, *** drag to move corner vertices, drag midpoints to add.2D / 3D parametric, freeform window

Multi-story elevator shaft with elevator car.

Shower cabin with tray and shower kit. Editable with MEP Modeler.

Counter with optional number of basins and taps. Editable with MEP Modeler.

Free form pool with different shapes and optional ladder.

2D / 3D parametric, freeform window

3D parametric, RH Moveon Large office chair, with \n- optional height\n- adjustable chair angle\n- adjustable backrest, armrest, neckrest

3D parametric, RH Moveon Medium office chair, with adjustable\n- seat\n- backrest\n- armrest\n- neckrest

2D / 3D parametric, wallniche fill tool

Chair with 2D symbols and minimal space.

3D parametric, wood form

3D parametric, Form simple wood bench, with iron frame

2D material legend in table form.

Free form pool with different shapes and optional ladder.

A 3D form to represent a gabion wall. A rectangular cage encloses a stack of randomized rocks. Care has been taken to reduce the number of edges and polygons, so the center is hollow and the rocks are angular. However if you apply a textured surface, the effect is not too bad.

A gas cylinder on a concrete pad. Options include pad shape and dimensions, and whether one or two gas bottles will be placed. Minimum clearance may be displayed in plan view and as a conical form in 3D.

Outil pour présenter un site autour du notre projet, de bâtiments différents en type et form, parametres pour jour et nuit, hauteur et plusieurs d'options.

Multi-story elevator shaft with elevator car.

Dachstuhlkonstruktion - wie der Roofmaker funktionieren sollte - oder besser noch -wie das ganze Dach eigentlich funktionieren sollte! Damit kann man sich im Grundriss und Schnitt sehr rasch an bestehende Wände und Dachflächen "anschmiegen". Dabei sind die Innen-Wärmedämm- und Verkleidungsschichten mit eingebaut und ebenfalls durch Anfasser ganz natürlich an die anderer Geometrie des Baues anpassbar. Die ganzen Elemente wie sparren, Pfetten und Dämmschichten "schwimmen" bei Änderung der Dachneigung "mit". Wenn ich also im Grundriss eine Pfette verschiebe, bleibt sie in der Ebene der Dachneigung jeweils an der richtigen Höhe. Wenn ich die Dachneigung verändere, bleibt die Pfette in der Grundrisslage - aber wandert mit der Sparrenkante mit. Wenn man sich im Bauteildialog bei Grundriss und Schnitt die Objektattribute aktiviert, erscheinen die Schraffuren im Schnitt in richtiger Form. Die Holzkonstruktion wird dabei von den Dämmschichten abgezogen. Mit geschickter Nutzung des SOE-Befehles zwischen Wänden und meinem Bauteil sind dann die Schnitte schon (fast) richtig. Ihr könnt Euch auch von meiner Dropbox das EDU17-File downloaden: https://www.dropbox.com/s/psala60uoxa0wcd/Dachkonstruktion%2017er%209.4.2014.pln Video: https://www.youtube.com/watch?v=l3mHcOECQUs 14.4.2012 - Anfasser zum seitlichen Verschieben der Giebel-Anschnitte 15.4.2012 - Aus - Einschalter für Pfetten und Schließenkranz-Seiten 18.4.2012 - Einfacher 6-Punkte - Lochwegschnitt hinzugefügt 20.4.2014 - unterer Anschnitt Sparren rausschiebbar für Möglichkeit des senkrechten Anschnitt des Sparrens. - Eine Querlattung unter den Sparren zwischen der Wärmedämmung - C-Profile unter dem GK in der Luftschichte 21.4.2014 - Traufenpfette hinzugefügt 22.4.2014 - Grat - Ichsensparren hinzugefügt (unterer Anschnitt fehlt hier noch) 28.4.2014 - Bugfixes bei Schließenkranzbreiten, Gratsparrenanschnitte

A marker to indicate theoretical sunrise and sunset angles for winter and summer. The angles are calculated based on the latitude as set in the Project Preferences. Place it as a border around any North pointer to form a complete symbol.

Shower cabin with tray and shower kit. Editable with MEP Modeler.

Accessoirehaken "Lilli" Diese bunten Vögelchen lieben Schmuck, Tücher und Accessoires. Anders als bei der diebischen Elster sind ihre Lieblingsstücke bei ihnen jedoch gut aufgehoben. Das Hakenset besteht aus zwei Vögeln unterschiedlicher Form und gleicher Farbe. Sie sind in pink, weiß und schwarz erhältlich. Durch eine fluoreszierende Leuchtfolie auf der Rückseite hinterlassen diese Vögel einen spannenden Farbschimmer auf hellen Rückwänden.

Dachstuhlkonstruktion - wie der Roofmaker funktionieren sollte - oder besser noch -wie das ganze Dach eigentlich funktionieren sollte! Damit kann man sich im Grundriss und Schnitt sehr rasch an bestehende Wände und Dachflächen "anschmiegen". Dabei sind die Innen-Wärmedämm- und Verkleidungsschichten mit eingebaut und ebenfalls durch Anfasser ganz natürlich an die anderer Geometrie des Baues anpassbar. Die ganzen Elemente wie sparren, Pfetten und Dämmschichten "schwimmen" bei Änderung der Dachneigung "mit". Wenn ich also im Grundriss eine Pfette verschiebe, bleibt sie in der Ebene der Dachneigung jeweils an der richtigen Höhe. Wenn ich die Dachneigung verändere, bleibt die Pfette in der Grundrisslage - aber wandert mit der Sparrenkante mit. Wenn man sich im Bauteildialog bei Grundriss und Schnitt die Objektattribute aktiviert, erscheinen die Schraffuren im Schnitt in richtiger Form. Die Holzkonstruktion wird dabei von den Dämmschichten abgezogen. Mit geschickter Nutzung des SOE-Befehles zwischen Wänden und meinem Bauteil sind dann die Schnitte schon (fast) richtig. Ihr könnt Euch auch von meiner Dropbox das EDU17-File downloaden: https://www.dropbox.com/s/psala60uoxa0wcd/Dachkonstruktion%2017er%209.4.2014.pln Video: https://www.youtube.com/watch?v=l3mHcOECQUs 14.4.2012 - Anfasser zum seitlichen Verschieben der Giebel-Anschnitte 15.4.2012 - Aus - Einschalter für Pfetten und Schließenkranz-Seiten 18.4.2012 - Einfacher 6-Punkte - Lochwegschnitt hinzugefügt 20.4.2014 - unterer Anschnitt Sparren rausschiebbar für Möglichkeit des senkrechten Anschnitt des Sparrens. - Eine Querlattung unter den Sparren zwischen der Wärmedämmung - C-Profile unter dem GK in der Luftschichte 21.4.2014 - Traufenpfette hinzugefügt 22.4.2014 - Grat - Ichsensparren hinzugefügt (unterer Anschnitt fehlt hier noch) 28.4.2014 - Bugfixes bei Schließenkranzbreiten, Gratsparrenanschnitte 29.4.2014 - Traufpfette(Brett) Neue Anfasser für Ein-Aus, Drehbarkeit und X+Y 4.5.2014 - Folgende Anfasser - Schalter bei Traufe im Schnitt hinzugefügt: Oberdachschichten zuschaltbar Innenschichten Schliessenkranz Gratsparren-Schalter Schalter zur einfachen Darstellung Schichtdicken im Schnitt stellbar. 7.5.2014 - Zusätzlicher Grundriss-Querschnitt ein-ausschaltbar mit fast allen Hotspots.

Dachstuhlkonstruktion - wie der Roofmaker funktionieren sollte - oder besser noch -wie das ganze Dach eigentlich funktionieren sollte! Damit kann man sich im Grundriss und Schnitt sehr rasch an bestehende Wände und Dachflächen "anschmiegen". Dabei sind die Innen-Wärmedämm- und Verkleidungsschichten mit eingebaut und ebenfalls durch Anfasser ganz natürlich an die anderer Geometrie des Baues anpassbar. Die ganzen Elemente wie sparren, Pfetten und Dämmschichten "schwimmen" bei Änderung der Dachneigung "mit". Wenn ich also im Grundriss eine Pfette verschiebe, bleibt sie in der Ebene der Dachneigung jeweils an der richtigen Höhe. Wenn ich die Dachneigung verändere, bleibt die Pfette in der Grundrisslage - aber wandert mit der Sparrenkante mit. Wenn man sich im Bauteildialog bei Grundriss und Schnitt die Objektattribute aktiviert, erscheinen die Schraffuren im Schnitt in richtiger Form. Die Holzkonstruktion wird dabei von den Dämmschichten abgezogen. Mit geschickter Nutzung des SOE-Befehles zwischen Wänden und meinem Bauteil sind dann die Schnitte schon (fast) richtig. Ihr könnt Euch auch von meiner Dropbox das EDU17-File downloaden: https://www.dropbox.com/s/psala60uoxa0wcd/Dachkonstruktion%2017er%209.4.2014.pln Video: https://www.youtube.com/watch?v=l3mHcOECQUs 14.4.2012 - Anfasser zum seitlichen Verschieben der Giebel-Anschnitte 15.4.2012 - Aus - Einschalter für Pfetten und Schließenkranz-Seiten 18.4.2012 - Einfacher 6-Punkte - Lochwegschnitt hinzugefügt

Most of the designs in the Convent CS System have longitudinal cable openings and covers as standard features. This gives the table a tidy appearance and a large capacity in terms of power supply and network connection. Standard: 38mm table top delivered in natural birch veneer. Oak, natural beech veneer, black-stained ash or stained as described in the Fora Form menu. For laminate, see the Fora Form menu.

The wave-laminated shell gives the Getz line a distinctive identity. The chairs are available with a number of different bases adapted to accommodate different needs and situations. Standard: Laminated birch. Steel: Chrome base. Plastic gliders available at no surcharge on Getz Conference and Getz Club. Laminated oak delivery on request. Arm rest is covered in black TP rubber. Getz Conference and Getz Club chair turns 360 degrees. On Getz Conference and Getz Club the base is available in black epoxy (RAL 9005) or white epoxy (RAL 9010) at no extra charge. Getz is available in white contrast seam (NCS S 0500-N), light grey (NSC S 2502-R), grey (NCS S 5502-B) and black (NSC S 9000-N). Weight/assembly: Getz Conference: Weight per chair 12,5kg. w/o armrests/ 14,5 kg. w/armrests. Delivered assembled. Packs 1 per carton. Getz Adjustable: Chair without arm rest 14kg / 16kg with arm rest. Delivered assembled. Packs 1 per carton. Getz Club: Weight per chair 15kg. Delivered assembled. Packs 1 per carton.

GELATO means ice in Italtian. The side view of the sofa can look like the shape of a soft ice. Soft and comfortable. Thick seat, but light and airy just the same, floating over light cast molded legs. Olav Eldøy is one of Scandinavia's leading designers, mostly known for good esthetic characteristic furniture. GELATO attend to the the rigid demand to function, comfort and system. One leg, one right module and a corner module give the user many variation possibilities in furnishing. The leg solution also makes it maintanence of the locality easy. GELATO is available as a chair, 2 and 3 seater, or as a modular sofa with or without a linking table. Upholstered arms are available on request. GELATO is delivered with a standard sofa hight, but can also be delivered in heights suited for dining areas.

Clean lines, precise seams and a characteristic base give Cox a distinctive style. Standard: The base is available in chrome. Info: Upholstery: Moulded cold-cured polyurethane foam. Assembly: Legs fitted after delivery. Each item sent separately. Leather or an elastic type of material is recommended. Not available in Microcare or Alcantara. Measures: 2-seater W145, 3-seater W196, D83, SH42, H70cm. Club Chair W74, D66, SH42, H70cm.

Clip is a functional stackable table system designed for large meeting places as assembly halls, auditoriums, conference rooms and dining areas. The tables have unique stacking qualities and with its own transport dolly makes it easy to rearrange or clear the location. Table tops are a light weight material covered with high press laminat. The legs are in chrome. Standard: White laminate (K1040UN), grey side list (NCS S 4500-N). Base: Polished stainless steel.

It is not often a jewel of a chair is launched. Copenhagen is just that chair. The chair is defiant, but at the same time is soft and harmonic. It can stand alone as a sculpture or several placed in a group. Copenhagen recommended with stretchable fabric like Divina, Fame and Vadal. Weight/Assembling: 10 kilo per chair. Delivered assembled. 1 chair per carton.

Convent Wall system are modules designed for meeting rooms that shall function with the help of a simple grip of the hand. This requires good planning for placement of all your media equipment, with experienced helpers, carpenters and electricians. Standard: Convent Wall is delivered in natural birch veneer as standard. Menu: Oak, natural beech veneer and full-colour stained ash or stained as described under Fora Form menu. Laminate according to Fora Form menu. The body is in antrasitt grey melamin, if no other is specified. Info: Under cabinets are delivered without shelves as standard. Under cabinet can be suited for refrigerator and technical rack or other AV-equipment. Over cabinet is delivered as special: adjusted to plasma screens, smart board, video conference equipment etc. Measures: Under cabinet 88x60x60cm

LOOP is an original, exciting and bold eye-catcher for your company. This exquisite designer gem will please your visitors. Loop has a feminine, organic shape. Loop is highly mobile.

Burell is a light sofa group with a stylish design. Available as a 2 or 3-seater sofa, chair with or without armrests, or bench. Standard: Available in laminated beech. Steel: Chrome. Info: Upholstery: moulded cold-cured polyurethane foam. Assembly: Legs require assembly. Each item sent separately. Measures: Chair: W55/65, 2-seater W110/120, 3-seater W165/175. Bench 2/3-seater W110/165, D63, SH44, H77cm.

The Planet chair and table was first launched in 1965 and remained a part of the collection until the end of the 1970s. Planet was the first spherical chair in Norwegian furniture history. The name alludes to the first space journey in 1961 and the entry of Pop Art furniture onto the Norwegian market. Delivered with plastic gliders. Planet may be turned 360 degrees, and is available with a soft tilt- forwards/backwards. We recommend choosing an elastic material such as Divina, Fame, Vadal and Cicero. There is an additional charge if you choose more than one fabric/colour per chair. The model is delivered with removable seat cover. The highest textile group form the basis for pricing.Planet is available in white contrast seam (NCS S 0500-N), light grey (NSC S 2502-R), grey (NCS S 5502-B) and black (NSC S 9000-N)

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Support leg with star base and fixed installation hight. Circular plate for screw fixing with the table top. Fits table tops up to 1000 mm. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

Electrical stand with 2-parallell system. The stands side caps are infinitely adjustable in length from 1200 mm to 2400 mm, fits table tops with a length from 1200 to 2000 mm. Stroke 500 (680-1180 mm excluding table top). Available in silver, black or white.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Sound absorber upholstered in fabric. Row with 4 panels. Total height incl, 50 mm spacing between panels is 1550 mm. One panel is 350 mmx 350 mm. Panel is attached to wall. Available without wall spacer, or with wall spacer in white painted sheet steel, 50 mm or 100 mm.

Sound absorber upholstered in fabric. Panel is attached to wall. Available without wall spacer, or with wall spacer in white painted sheet steel, 50 mm or 100 mm.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Support leg with star base and fixed installation hight. Circular plate for screw fixing with the table top. Fits table tops up to 1000 mm. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Sound absorber upholstered in fabric. Row with 4 panels. Total height incl, 50 mm spacing between panels is 1550 mm. One panel is 350 mmx 350 mm. Panel is attached to wall. Available without wall spacer, or with wall spacer in white painted sheet steel, 50 mm or 100 mm.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Supplementing the existing electrical two-leg stand 2-parallell system, making a stand with 3 legs.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Sound absorber upholstered in fabric. Panel is attached to wall. Available without wall spacer, or with wall spacer in white painted sheet steel, 50 mm or 100 mm.

Support leg with star base and fixed installation hight. Circular plate for screw fixing with the table top. Fits table tops up to 1000 mm. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Bloom cable opening cap.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Manually adjustable single-leg, diameter 40 mm. Adjustable 590-820 mm excl tabletop. Can be supplemented with side cap and side cap connections for increased stability. Recommended for table length over 1200 mm. Available in silver, black or chrome.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Support leg with star base and fixed installation hight. Circular plate for screw fixing with the table top. Fits table tops up to 1000 mm. Available in silver, chrome, and white painted legs with chrome feet.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Electrical stand with 2-parallell system. The stands side caps are infinitely adjustable in length from 1200 mm to 2400 mm, fits table tops with a length from 1200 to 2000 mm. Stroke 650 (615-1265 mm excluding table top). Available in silver or white.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Electrical stand with 2-parallell system. The stands side caps are infinitely adjustable in length from 1200 mm to 2400 mm, fits table tops with a length from 1200 to 2000 mm. Stroke 650 (615-1265 mm excluding table top). Available in silver or white.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Sound absorber upholstered in fabric. Row with 4 panels. Total height incl, 50 mm spacing between panels is 1550 mm. One panel is 350 mmx 350 mm. Panel is attached to wall. Available without wall spacer, or with wall spacer in white painted sheet steel, 50 mm or 100 mm.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Sound absorber upholstered in fabric. Panel is attached to wall. Available without wall spacer, or with wall spacer in white painted sheet steel, 50 mm or 100 mm.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Electrical extension leg incl. side cap and side cap connections (joint plates is not included). Stroke 600 mm (625-1225 mm excluding table top). Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Tabletop in MFC, 22 mm particleboard. Edging in 2 mm Propylene. Edge decor according to sample list. Corner radius 20 mm. Available in white, grey and birch.

Support leg with star base and fixed installation hight. Circular plate for screw fixing with the table top. Fits table tops up to 1000 mm. Available in silver, chrome, and white painted legs with chrome feet.

Electrical stand with 2-parallell system. The stands side caps are infinitely adjustable in length from 1200 mm to 2400 mm, fits table tops with a length from 1200 to 2000 mm. Stroke 500 (680-1180 mm excluding table top). Available in silver, black or white.

Stands are prepared for expansion to the 3-parallel systems. Stroke 600 mm (625-1225 mm excluding table top). Length of stand is 60 mm shorter than the specified table length. Available in silver, chrome, and white painted legs with chrome feet.

Support leg with star base and fixed installation hight. Circular plate for screw fixing with the table top. Fits table tops up to 1000 mm. Available in silver, chrome, and white painted legs with chrome feet.

Chair with 2D symbols and minimal space.

Multi-story elevator shaft with elevator car.

Counter with optional number of basins and taps. Editable with MEP Modeler.

Accessoirehaken "Lilli" Diese bunten Vögelchen lieben Schmuck, Tücher und Accessoires. Anders als bei der diebischen Elster sind ihre Lieblingsstücke bei ihnen jedoch gut aufgehoben. Das Hakenset besteht aus zwei Vögeln unterschiedlicher Form und gleicher Farbe. Sie sind in pink, weiß und schwarz erhältlich. Durch eine fluoreszierende Leuchtfolie auf der Rückseite hinterlassen diese Vögel einen spannenden Farbschimmer auf hellen Rückwänden.

Beistelltisch "Jogy" Der Beistelltisch - das kleine Regal - oder der Edelhockel. Er steht auf allen vier Seiten gut. Acht unsichtbar verschweißte Aluminiumplatten verschmelzen zu einer leichten und transparenten Form. Erhältlich in zwei Varianten: ganz puristisch in weiß oder in anthrazit mit hochglanzpolierten Kanten

Dachstuhlkonstruktion - für die 16er Version und somit meine Schüler wie der Roofmaker funktionieren sollte - oder besser noch -wie das ganze Dach eigentlich funktionieren sollte! Damit kann man sich im Grundriss und Schnitt sehr rasch an bestehende Wände und Dachflächen "anschmiegen". Dabei sind die Innen-Wärmedämm- und Verkleidungsschichten mit eingebaut und ebenfalls durch Anfasser ganz natürlich an die anderer Geometrie des Baues anpassbar. Die ganzen Elemente wie sparren, Pfetten und Dämmschichten "schwimmen" bei Änderung der Dachneigung "mit". Wenn ich also im Grundriss eine Pfette verschiebe, bleibt sie in der Ebene der Dachneigung jeweils an der richtigen Höhe. Wenn ich die Dachneigung verändere, bleibt die Pfette in der Grundrisslage - aber wandert mit der Sparrenkante mit. Wenn man sich im Bauteildialog bei Grundriss und Schnitt die Objektattribute aktiviert, erscheinen die Schraffuren im Schnitt in richtiger Form. Die Holzkonstruktion wird dabei von den Dämmschichten abgezogen. Mit geschickter Nutzung des SOE-Befehles zwischen Wänden und meinem Bauteil sind dann die Schnitte schon (fast) richtig. Ihr könnt Euch auch von meiner Dropbox das EDU17-File downloaden: https://www.dropbox.com/s/psala60uoxa0wcd/Dachkonstruktion%2017er%209.4.2014.pln Video: https://www.youtube.com/watch?v=l3mHcOECQUs 14.4.2012 - Anfasser zum seitlichen Verschieben der Giebel-Anschnitte 15.4.2012 - Aus - Einschalter für Pfetten und Schließenkranz-Seiten 18.4.2012 - Einfacher 6-Punkte - Lochwegschnitt hinzugefügt 20.4.2014 - unterer Anschnitt Sparren rausschiebbar für Möglichkeit des senkrechten Anschnitt des Sparrens. - Eine Querlattung unter den Sparren zwischen der Wärmedämmung - C-Profile unter dem GK in der Luftschichte 21.4.2014 - Traufenpfette hinzugefügt 22.4.2014 - Grat - Ichsensparren hinzugefügt (unterer Anschnitt fehlt hier noch)

Dachstuhlkonstruktion - wie der Roofmaker funktionieren sollte - oder besser noch -wie das ganze Dach eigentlich funktionieren sollte! Damit kann man sich im Grundriss und Schnitt sehr rasch an bestehende Wände und Dachflächen "anschmiegen". Dabei sind die Innen-Wärmedämm- und Verkleidungsschichten mit eingebaut und ebenfalls durch Anfasser ganz natürlich an die anderer Geometrie des Baues anpassbar. Die ganzen Elemente wie sparren, Pfetten und Dämmschichten "schwimmen" bei Änderung der Dachneigung "mit". Wenn ich also im Grundriss eine Pfette verschiebe, bleibt sie in der Ebene der Dachneigung jeweils an der richtigen Höhe. Wenn ich die Dachneigung verändere, bleibt die Pfette in der Grundrisslage - aber wandert mit der Sparrenkante mit. Wenn man sich im Bauteildialog bei Grundriss und Schnitt die Objektattribute aktiviert, erscheinen die Schraffuren im Schnitt in richtiger Form. Die Holzkonstruktion wird dabei von den Dämmschichten abgezogen. Mit geschickter Nutzung des SOE-Befehles zwischen Wänden und meinem Bauteil sind dann die Schnitte schon (fast) richtig. Ihr könnt Euch auch von meiner Dropbox das EDU17-File downloaden: https://www.dropbox.com/s/psala60uoxa0wcd/Dachkonstruktion%2017er%209.4.2014.pln Video: https://www.youtube.com/watch?v=xATF6RqMzrE

Dachstuhlkonstruktion - wie der Roofmaker funktionieren sollte - oder besser noch -wie das ganze Dach eigentlich funktionieren sollte! Für die 16er Version.. Damit kann man sich im Grundriss und Schnitt sehr rasch an bestehende Wände und Dachflächen "anschmiegen". Dabei sind die Innen-Wärmedämm- und Verkleidungsschichten mit eingebaut und ebenfalls durch Anfasser ganz natürlich an die anderer Geometrie des Baues anpassbar. Die ganzen Elemente wie sparren, Pfetten und Dämmschichten "schwimmen" bei Änderung der Dachneigung "mit". Wenn ich also im Grundriss eine Pfette verschiebe, bleibt sie in der Ebene der Dachneigung jeweils an der richtigen Höhe. Wenn ich die Dachneigung verändere, bleibt die Pfette in der Grundrisslage - aber wandert mit der Sparrenkante mit. Wenn man sich im Bauteildialog bei Grundriss und Schnitt die Objektattribute aktiviert, erscheinen die Schraffuren im Schnitt in richtiger Form. Die Holzkonstruktion wird dabei von den Dämmschichten abgezogen. Mit geschickter Nutzung des SOE-Befehles zwischen Wänden und meinem Bauteil sind dann die Schnitte schon (fast) richtig. Ihr könnt Euch auch von meiner Dropbox das EDU17-File downloaden: https://www.dropbox.com/s/psala60uoxa0wcd/Dachkonstruktion%2017er%209.4.2014.pln https://www.youtube.com/watch?v=xATF6RqMzrE

Kräutergarten "Käthe" Waschechte Flusssteine standen Modell für diesen formschönen, dreiteiligen Kräutergarten. Durch seine natürliche, organische Form und die schlichte Farbe passt der Kräutergarten in jede Küche. Schön arrangiert findet er auch auf einem schmalen 45er Schrank seinen Plazt. Jedes Set ist ein Unikat, das aus naturbelassenem Porzellan von der Hand gefertigt wird.

Kräutergarten "Käthe" Waschechte Flusssteine standen Modell für diesen formschönen, dreiteiligen Kräutergarten. Durch seine natürliche, organische Form und die schlichte Farbe passt der Kräutergarten in jede Küche. Schön arrangiert findet er auch auf einem schmalen 45er Schrank seinen Plazt. Jedes Set ist ein Unikat, das aus naturbelassenem Porzellan von der Hand gefertigt wird.

Kräutergarten "Käthe" Waschechte Flusssteine standen Modell für diesen formschönen, dreiteiligen Kräutergarten. Durch seine natürliche, organische Form und die schlichte Farbe passt der Kräutergarten in jede Küche. Schön arrangiert findet er auch auf einem schmalen 45er Schrank seinen Plazt. Jedes Set ist ein Unikat, das aus naturbelassenem Porzellan von der Hand gefertigt wird.

2D surface legend in table form.

Timber planks laid over cables to form a wobbly bridge for use in an adventure playground.

Designed by Eileen Gray, 1927; - This is perhaps the classic among the classics is this perhaps the classic. Its ingeniously proportioned, distinctive form has made this height-adjustable table one of the most popular design icons of the 20th century. It is named after the summer house E 1027 “Maison en bord de mer” that Eileen Gray built for herself and for her collaborator, Jean Badovici. The secret code-name likewise comes from her: E is for Eileen, 10 for Jean (J is the 10th letter of the alphabet), 2 for B(adovici) and 7 for G(ray). Adjustable side table. Frame of chromium-plated steel tubing. Top of clear crystal glass, parsol grey or black laquered metal. Details see price list. Authorised by The World Licence Holder Aram Designs Ltd, London

Designed by Sauerbruch Hutton in 2009; - Modern art of the 20th and 21st centuries deserves an appropriate setting, with a building and its furniture that is just as modern. Berlin architects Sauerbruch Hutton were thus faced with an exciting challenge when asked to design the Museum Brandhorst in Munich. Three different seating solutions were developed for the museum, which opened in 2009 – for the cafeteria, the foyer, the conference and lecture rooms as well as the lounge. ClassiCon developed the designs to the point of series production in close collaboration with the architects. Along with demanding expectations in terms of form and quality, the typical wear and tear that the furniture would be subjected to in the public space had also to be taken into consideration. Its durability was ensured by means of various tests. Frame of solid wood, clearly varnished or black-stained. Frame of steel tubing with rubber webbing. Upholstery: Polyurethane with polyester fibre. Cover in fabric or leather. Details, colours and European standard tests see price list.

Designed by Sauerbruch Hutton in 2011; - Modern art of the 20th and 21st centuries deserves an appropriate setting, with a building and its furniture that is just as modern. Berlin architects Sauerbruch Hutton were thus faced with an exciting challenge when asked to design the Museum Brandhorst in Munich. Three different seating solutions were developed for the museum that opened in 2009 – for the cafeteria, the foyer, the conference and lecture rooms as well as the lounge. ClassiCon developed the designs to the point of series production in close collaboration with the architects. Along with demanding expectations in terms of form and quality, the typical wear and tear that the furniture would be subjected to in the public space had also to be taken into consideration. Its durability was ensured by means of various tests. Base of solid wood. Frame of steel tubing (with rubber webbing). Upholstery: Polyurethane with polyester fibre. Cover in fabric or leather. Details, colours and European standard tests see price list.

Designed by Sauerbruch Hutton in 2011; - Modern art of the 20th and 21st centuries deserves an appropriate setting, with a building and its furniture that is just as modern. Berlin architects Sauerbruch Hutton were thus faced with an exciting challenge when asked to design the Museum Brandhorst in Munich. Three different seating solutions were developed for the museum that opened in 2009 – for the cafeteria, the foyer, the conference and lecture rooms as well as the lounge. ClassiCon developed the designs to the point of series production in close collaboration with the architects. Along with demanding expectations in terms of form and quality, the typical wear and tear that the furniture would be subjected to in the public space had also to be taken into consideration. Its durability was ensured by means of various tests. Base of solid wood. Frame of steel tubing (with rubber webbing). Upholstery: Polyurethane with polyester fibre. Cover in fabric or leather. Details, colours and European standard tests see price list.

MevaDec Innovation - Formula 1 Form any slab with one and the same system: choose integrated or separate forming face The MevaDec slab formwork system has revolutionised the was slabs - by far the largest are in concrete works - are poured. Most importantly, it covers three different forming methods in one and the same system, enabling the concrete contractor to form any slab without changing parts and without additional inventory. The slab formwork system is easily adaptable to

Life - Double towel hook chrome. Concealed fastening. Feature hooks which combine form and function and blend with other Smedbo Products.

Bond is a chair designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The design is

Mono Low is a small coffee table/side table in spun metal with a reversible glass tabletop foiled on both sides so that you can easily change the look of the table. There is room for storage inside the table underneath the glass top. Metal-spinning techniques are commonly used for manufacturing lampshades, but they do have limitations with regard to the weight of the material to be processed. With Mono tables, however, we have extended the boundaries of what it is now possible to produce in this way. Mia Cullin’s inspiration for Mono was the form and function of various everyday receptacles such as vases, dishes, bowls, cylinders and pots.

Adesso sofas have a harmonic beautiful design with an even horizon, i.e. all sides are the same height. It is easy to get into and out of thanks to a horizontal support at a lower level than the crossbar. Adesso has a strong wood feeling and details that bear witness to the care put into the craftmanship. It is the choice of fabric that determines the final character of the sofa. Adesso has a beautiful form with open space between the crossbar and legs. The seat cushions have a special filling with soft seat core and a firmer front edge. This provides maximum seating comfort while making it easy to get up from armchair. Notches at the bottom front edge of the seat cushion keep it stably in the correct position. The upholstery can be easily removed and washed. The has has removable upholstery. Domestic or rubberised weave. Machine washable at 60°. The Adesso series also includes 2 and 3-seat sofas, a coffee and side table and a desk. Supplied ready assembled.Design: Marit Stigsdotter.

The every-day's stress and musts will literally rinse off of you with Mora Inxx Shower system. With its clean lines and strict unites form and function in an uncompromising manner. The big takduschen of 250 mm spread the water generously over the body and conveys a strong feeling - that will last. Calc system makes sure you do not need to bother with nozzles that chalices again.

Lilla Åland is a real stalwart in the Stolab range and a favourite that has represented excellent Swedish 20th century design on many occasions. Carl Malmsten was inspired by a visit to the Finnström Church on Åland, which contained a number of stick-back chairs lined up. He drew them and after a few of his own adjustments and additions, typical of his own particular style, serial production could commence. Each back pin is grooved at both ends, providing a larger attachment area for the glue, thus increasing durability. The narrowing of the back pins upwards forms a strong, springy and comfortable back support. The hollowed top section further increases comfort. Recessed seat for greater comfort. Reinforcement in the form of a crossbrace between the chair legs. Lilla Åland is also available as an armchair. Supplied ready-assembled. Available in natural lacquer, oil or stain. Design: Carl Malmsten.

Bond är ett konferensbord formgivet av Jean-Marie Massaud. Namnet Bond är engelska och betyder foga samman eller skapa vänskapsband till någon. Det sammanfattar tanken bakom möbelserien. Dess enkla och mjuka form inbjuder till möten mellan människor. Desi

The every-day's stress and musts will literally rinse off of you with Mora Inxx Shower system. With its clean lines and strict unites form and function in an uncompromising manner. The big takduschen of 250 mm spread the water generously over the body and conveys a strong feeling - that will last. Calc system makes sure you do not need to bother with nozzles that chalices again.

Gate is a linkable bench system for public areas. Benches available in two straight (GS) and two curved (GR) basic units. Use the Gate basic units to form rows that are straight, curved or at right angles to suit their setting. These can be fitted with backrests, and/or seats as required. Use our design tool to configure your own Gate! Standard spacing gives a centre-to-centre seat space of 600 mm, but this spacing may be varied to accommodate more or fewer seats as desired. Benches may be anchored to the floor. Design: Börge Lindau & Johan Lindau.

Mora Inxx combines form and function in an uncompromising manner. It beautifies its surroundings and take the liberty to translate top-level design in everyday use. Here in a kitchen mixer with swivel spout around. Of course, we have the rigid surface, built into our unique comfort and safety features - that's the way we do not compromise.

Bond is a coffee table designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The desi

NOBIS is a table that was originally created for the hotel Knobs in Stockholm where Claesson Koivisto Rune was responsible for the interior design. NOBIS’s form can paradoxically be described as a sort of round square, that is to say, the square that cons

This table takes its inspiration from previous generations’ practical dining tables, where the table extension was stored in a box under the table. Allegro is a substantial table, where form and function are unifined in a tasteful, practical manner. A table that grows with the task. The Allegro range also includes a chair, upholstered chair, chair with an upholstered back, chair with webbing, bar stool, bar table, sideboard, cupboard and shelving unit. Supplied pre-assembled. Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Four thin sheets of metal appear to be gracefully balancing on top of each other. Together they form the highly functional and sculptural side table Caramel, a temporary workstation in a meeting place and a striking object that pleases both the public and

Soundwave® SCREEN is a complementary product for the Soundwave® system in the form of a screen, a combined projection surface and white magnetic glass board. By integrating SCREEN in the Soundwave® system the usefulness of Soundwave® in contemporary inter

Bond is a coffee table designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The desi

NOBIS is a table that was originally created for the hotel Knobs in Stockholm where Claesson Koivisto Rune was responsible for the interior design. NOBIS’s form can paradoxically be described as a sort of round square, that is to say, the square that cons

Ibbi is a lounge chair with a lot of character and is a beautiful example of what opportunities wood presents. The chair is made of birch and has two main parts, the ends and the laths. The ends are two reversed copies of each other and the laths create the seat and back. The chair has a soft form that encompasses the body so that it feels encompassing, safe and inviting. A neck cushion/back support and seat cushion are available as additional options. On the back of the chair you can see the soft roundness extra clearly, making Ibbi equally beautiful from all directions. The corners, which stick up cheekily from the back, are decorative and practical for hanging things on. The handles on the front edge are useful when you have to get up. Ibbi’s ends have a beautiful wedge which make the chair stable and give it a well-crafted appearance. Available in natural lacquer, oil or stain. Design: Nils Gulin.

This table takes its inspiration from previous generations’ practical dining tables, where the table extension was stored in a box under the table. Allegro is a substantial table, where form and function are unifined in a tasteful, practical manner. A table that grows with the task. The Allegro range also includes a chair, upholstered chair, chair with an upholstered back, chair with webbing, bar stool, bar table, sideboard, cupboard and shelving unit. Supplied pre-assembled. Available in Natural lacquer, oil or stain. Design: Marit Stigsdotter.

The easy chair Palma is designed by Khodi Feiz. Palma is inspired by the cupped palm of a hand, symbolically cradling the body that sits in it. The chair's elegant form is captured in the seat, backrest and armrests as a single graceful movement. With its

Traryd Optimal sidohängda fönster gör det lätt att vädra utan att du behöver flytta undan blommor och lampor på fönsterbrädorna. Fönstren har som standard ett lågt u-värde och hög säkerhet i form av bakkantssäkring och med spanjolettlåsning där kolvarna h

The every-day's stress and musts will literally rinse off of you with Mora Inxx Shower system. With its clean lines and strict unites form and function in an uncompromising manner. The big takduschen of 250 mm spread the water generously over the body and conveys a strong feeling - that will last. Calc system makes sure you do not need to bother with nozzles that chalices again.

The table Bird, designed by Johan Ridderstråle & Mats Broberg, is a different ‘single table’ whose design brings the mind to a bird’s leg. With a connected form and special design the table has its own expression but remains easy to apply. Bird can stand

DYNAMIC AND ACTIVE The Trixagon Table stimulates dynamic and active learning and communication. The hexagonal tabletops always link up in threes to form a larger table that provides users with a maximum of custom work surface, while at the same time provi

Thermostatic mixer for secure comfort. Downward outlet. Mora Inxx combines form and function in an uncompromising manner. It does its job admirably - both in terms of providing a bath or shower with the perfect temperature water, as to convey an individual expression in your bathroom. Of course, we have the rigid surface, built into our unique comfort and safety features - that's the way we do not compromise.

Life - Quadruple hook chrome. Concealed fastening. Feature hooks which combine form and function and blend with other Smedbo Products.

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 2 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish. sledge-base.

Bond is a chair designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The design is

An office obviously need solid walls too. FLEX OFFICE is a stylish wall with smooth or textured surface to be painted in any NCS color. FLEX OFFICE has a hat profile where you simply attach shelves, hooks, message boards and more. FLEX OFFICE works well in combination with FLEX WOOD LINE and FLEX GLASSLINE. Mix them well to get the dense wall advantages in terms of furnishing and insulation and glass strength in the form of light, openness and community.

The easy chair LAYER is characterized by three layers, which can be varied in terms of textile and color in order to create a unique design. The first layer can be compared to a stool, the second layer to a chair and the third layer creates the final form

Lättlagda cirklar med trumlad marksten En cirkel av marksten i trädgården blir en vacker form som följer naturens egna struktur. Den runda formen förstärket intrycket av flera rum i trädgården. Skapa helhet med marksten och block Bygg gärna en låg mu

Life - Single towel hook chrome/black ABS. Concealed fastening. Feature hooks which combine form and function and blend with other Smedbo Products.

Bond is a conference table designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The

NOBIS is a table that was originally created for the hotel Knobs in Stockholm where Claesson Koivisto Rune was responsible for the interior design. NOBIS’s form can paradoxically be described as a sort of round square, that is to say, the square that cons

Life - Single towel hook chrome. Concealed fastening. Feature hooks which combine form and function and blend with other Smedbo Products.

With pop-up waste. ECO-flow. Mora Inxx combines form and function in an uncompromising manner. The beautify their surroundings and take the liberty to translate top-level design in everyday use. Here in a basin mixer with pop-up waste. Of course, we have the rigid surface, built into our unique comfort and safety features - that's the way we do not compromise.

Life – Swing Arm Triple hook chrome. Concealed fastening. Feature hooks which combine form and function and blend with other Smedbo Products.

Mora Inxx combines form and function in an uncompromising manner. It beautifies its surroundings and take the liberty to translate top-level design in everyday use. Here in a kitchen mixer with swivel spout around. Of course, we have the rigid surface, built into our unique comfort and safety features - that's the way we do not compromise.

This table takes its inspiration from previous generations’ practical dining tables, where the table extension was stored in a box under the table. Allegro is a substantial table, where form and function are unifined in a tasteful, practical manner. A table that grows with the task. The Allegro range also includes a chair, upholstered chair, chair with an upholstered back, chair with webbing, bar stool, bar table, sideboard, cupboard and shelving unit. Supplied pre-assembled. Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Bond is a chair designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The design is

With their simple, minimalist design, Mora Rexx mixers are the essence of Scandinavian design and functionality. Their innovation lies in their precision. When tradition and craftsmanship meet state-of-the-art manufacturing methods and inspiring design, the result is Mora Rexx. Here, in the form of a beautiful basin mixer with intelligent functionality and elevated foot.

Soundwave® SHELF is designed by Mario Ruiz. SHELF is a complementary product for the Soundwave® system in the form of a shelf. SHELF fits perfectly with Offecct’s selection of acoustic panels and offers the possibility to create Soundwave® interiors cont

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 4 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish.

An office obviously need solid walls too. FLEX FINE LINE is a stylish office wall with a subtle V-groove. You can get it with smooth or textured surface to be painted in any NCS color. FLEX FINELINE works well in combination with FLEX WOOD LINE and FLEX GLASSLINE glass walls. Mix them well to get the dense wall advantages in terms of furnishing and insulation and glass strength in the form of light, openness and community.

NOBIS is a table that was originally created for the hotel Knobs in Stockholm where Claesson Koivisto Rune was responsible for the interior design. NOBIS’s form can paradoxically be described as a sort of round square, that is to say, the square that cons

In 1955 Yngve Ekström (known for such designs as the Lamino armchair) designed a low stick-back chair for Stolab that was given the name Arka. We have brought the chair back to life and are proud to present it fully intact in its stately and unique form. Just as beautiful and more right than ever. The Arka lounge chair has a distinct design based on three different circles. With its unique design, Arka fits in just as well standing alone as it does in a group of several chairs. With the sheepskin cushion (available as an option), Arka becomes a really comfortable place to sit for long or short periods of time. Sheepskin cushion as option. Supplied ready assembled. Available in natural lacquer, oil or stain. Design: Yngve Ekström.

This table takes its inspiration from previous generations’ practical dining tables, where the table extension was stored in a box under the table. Allegro is a substantial table, where form and function are unifined in a tasteful, practical manner. A table that grows with the task. The Allegro range also includes a chair, upholstered chair, chair with an upholstered back, chair with webbing, bar stool, bar table, sideboard, cupboard and shelving unit. Supplied pre-assembled. Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Bond is a chair designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The design is

Lättlagda cirklar med trumlad marksten En cirkel av marksten i trädgården blir en vacker form som följer naturens egna struktur. Den runda formen förstärket intrycket av flera rum i trädgården. Skapa helhet med marksten och block Bygg gärna en låg mu

Airberg by Jean-Marie Massaud is an innovative piece of furniture that breaks with conventions. The inspiration behind the form of Airberg is a combination of a comfortable, inviting piece of seating furniture and an iceberg filled with vacuum. The furnit

Lilla Åland as an armchair was a natural successor and complement to the original stick-back chair. The central pins in the seat provide increased durability. Each back pin is grooved at both ends, providing a larger attachment area for the glue, thus increasing durability. The narrowing of the back pins upwards forms a strong, springy and comfortable back support. The hollowed top section further increases comfort. Recessed seat for greater comfort. Reinforcement in the form of a crossbrace between the chair legs. Available in natural lacquer, oil or stain. Design: Carl Malmsten.

Adesso sofas have a harmonic beautiful design with an even horizon, i.e. all sides are the same height. It is easy to get into and out of thanks to a horizontal support at a lower level than the crossbar. Adesso has a strong wood feeling and details that bear witness to the care put into the craftmanship. It is the choice of fabric that determines the final character of the sofa. Adesso has a beautiful form with open space between the crossbar and legs. The seat cushions have a special filling with soft seat core and a firmer front edge. This provides maximum seating comfort while making it easy to get up from armchair. Notches at the bottom front edge of the seat cushion keep it stably in the correct position. The upholstery can be easily removed and washed. The has has removable upholstery. Domestic or rubberised weave. Machine washable at 60°. The Adesso series also includes 2 and 3-seat sofas, a coffee and side table and a desk. Supplied ready assembled.Design: Marit Stigsdotter.

A modern drop-leaf table with clear Scandinavian characteristics. The light, smooth surface of the birch meets the hard, slightly raw surface of the Bohus granite. A very effective meeting of form and function. Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Bond is a coffee table designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The desi

The every-day's stress and musts will literally rinse off of you with Mora Inxx Shower system. With its clean lines and strict unites form and function in an uncompromising manner. The big takduschen of 250 mm spread the water generously over the body and conveys a strong feeling - that will last. Calc system makes sure you do not need to bother with nozzles that chalices again.

Elevated foot. With pop-up waste. ECO-flow. Mora Inxx combines form and function in an uncompromising manner. The beautify their surroundings and take the liberty to translate top-level design in everyday use. Here in a basin mixer with raised base and lift valve. Of course, we have the rigid surface, built into our unique comfort and safety features - that's the way we do not compromise.

Life - Single towel hook chrome. Concealed fastening. Feature hooks which combine form and function and blend with other Smedbo Products.

Bond Light is a chair designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The desi

Bond is an easy chair designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the product. It’s simple and soft form invites people to meet. The des

During a hike at the stunning beaches of Åhus in Southern Sweden, a warm afternoon in late autumn, Börge Lindau spotted a man sitting on the beach. He had put down a washed up plank in the sand as a backrest, sat on his newspaper and had rolled up his towel as a headrest. This man´s pleasurable moment was the inspiration for Planka. Standing in the borderland between art and design, the Planka chair makes a perfect post-modern comment on functional form. Information Swivel base. Foot plate of powder coated steel. Polished chrome tubing support. Back of lacquered wood alt. upholstered in black or natural coach hide leather. Seat of perforated sheet metal or upholstered in black or natural coach hide leather. Adjustable neck cushion in leather or fabric. Weight: 14 kg Features & Benefits F Lacquered plywood vertical element. B Simplest execution. F Minimalist seat platform. B Pure function and form. F Adjustable neck cushion. B Adapts to height of sitter. F Swivel base. B Turn, turn, turn.

Airberg by Jean-Marie Massaud is an innovative piece of furniture that breaks with conventions. The inspiration behind the form of Airberg is a combination of a comfortable, inviting piece of seating furniture and an iceberg filled with vacuum. The furnit

The easy chair Palma is designed by Khodi Feiz. Palma is inspired by the cupped palm of a hand, symbolically cradling the body that sits in it. The chair's elegant form is captured in the seat, backrest and armrests as a single graceful movement. With its

Mora Inxx combines form and function in an uncompromising manner. It beautifies its surroundings and take the liberty to translate top-level design in everyday use. Here in a kitchen mixer with swivel spout around. Of course, we have the rigid surface, built into our unique comfort and safety features - that's the way we do not compromise.

NOBIS is a table that was originally created for the hotel Knobs in Stockholm where Claesson Koivisto Rune was responsible for the interior design. NOBIS’s form can paradoxically be described as a sort of round square, that is to say, the square that cons

Mono is a small coffee table/side table in spun metal with a reversible glass tabletop foiled on both sides so that you can easily change the look of the table. There is room for storage inside the table underneath the glass top. Metal-spinning techniques are commonly used for manufacturing lampshades, but they do have limitations with regard to the weight of the material to be processed. With Mono tables, however, we have extended the boundaries of what it is now possible to produce in this way. Mia Cullin’s inspiration for Mono was the form and function of various everyday receptacles such as vases, dishes, bowls, cylinders and pots.

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 2 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish. sledge-base.

With the Hundranian armchair, Jonas has taken inspiration from the chairs of the 1910s and 1920s, and developed a modern café chair. It offers an idiomatic simplicity that makes the chair ideal in environments where a large number of seats are required, and where demands are placed on both form and function. The Hundranian is stackable (6 chairs) and highly stable, thanks to its aluminium frame underneath the seat. It is also very comfortable, due to the generous and embracing backrest. The choice of fi nish and colour determines the chair's final expression. The aluminium frame can also be lacquered in Stolab's standard colours. Standard on the frame is silver.

This table takes its inspiration from previous generations’ practical dining tables, where the table extension was stored in a box under the table. Allegro is a substantial table, where form and function are unifined in a tasteful, practical manner. A table that grows with the task. The Allegro range also includes a chair, upholstered chair, chair with an upholstered back, chair with webbing, bar stool, bar table, sideboard, cupboard and shelving unit. Supplied pre-assembled. Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Bond is a bar stool designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The design

NOBIS is a table that was originally created for the hotel Knobs in Stockholm where Claesson Koivisto Rune was responsible for the interior design. NOBIS’s form can paradoxically be described as a sort of round square, that is to say, the square that cons

Vivi wooden chair is a real “darling”. A shell chair in layer-glued wood with legs or runners to ensure it is at home in every environment, from café to auditorium. The layer-glued runners mean that the chair is extremely stable in form, strong and stands firm and steady. A furnishing solution with chairs that are made exclusively in wood not only creates a warm, welcoming atmosphere, but wooden chairs are also quieter than other chairs. Chair Vivi 2 is a stackable chair in lacquered layer-glued, compression-moulded ash wood. Available in natural or coloured finish. sledge-base.

With their simple, minimalist design, Mora Rexx mixers are the essence of Scandinavian design and functionality. Their innovation lies in their precision. When tradition and craftsmanship meet state-of-the-art manufacturing methods and inspiring design, the result is Mora Rexx. Here, in the form of a beautiful basin mixer with intelligent functionality and elevated foot.

Mora Inxx förenar form och funktion på ett kompromisslöst sätt. Den förskönar sin omgivning och tar sig frihet att omsätta vacker design i daglig användning. Här i en köksblandare med svängbar pip. Givetvis har vi under den strikta ytan, byggt in våra unika komfort- och säkerhetsfunktioner – det är vårt sätt att inte kompromissa.

Origo is much more than “just a stool”. Here the legs have become one with the seat, giving it an exciting and finished look that is further strengthened by the natural stain/colour contrast. The design makes Origo very stable. Origo has legs which are beautifully integrated with the seat in a crafted way. As well as being practical, the squareness of the hole also serves a function. It functions as a handle, and at the same time, the square form is an efficient foil to the roundness of the legs and seat. Stackable, 7. Supplied ready-assembled. Available in natural lacquer, oil or stain. Design: Marit Stigsdotter.

Design: Bror Boije The furniture serie Fri is designed for creative interior design with an emphasis on mobility and flexibility. The Fri serie offers a great variety of combination possibilities for you to put your personal stamp in the workplace. Plan. Combine. Drop the thought free. You can choose from more than 1,000 forms on your desktop, different edge profiles, different woods, different kinds of legs and equal kinds of storage. Create your location. Create free. Choose between birch, beech, oak, walnut and white laminate to your desktop. Legs in silver, white or chrome. The furniture serie Fri is awarded the title of "Excellent Swedish Design" for its innovative form. Fri is also marked the Nordic Ecolabel Svanen.

Bond Light is a chair designed by Jean-Marie Massaud. The name Bond refers to the possibility to concatenate and create a friendship bond with someone. This sums up the thought behind the series. It’s simple and soft form invites people to meet. The desi

With the Hundranian, Jonas has taken inspiration from the chairs of the 1910s and 1920s, and developed a modern café chair. It offers an idiomatic simplicity that makes the chair ideal in environments where a large number of seats are required, and where demands are placed on both form and function. The Hundranian is stackable (6 chairs) and highly stable, thanks to its aluminium frame underneath the seat. It is also very comfortable, due to the generous and embracing backrest. The choice of fi nish and colour determines the chair's fi nal expression. Hundranian will also be available with armrests. The aluminium frame can also be lacquered in Stolab's standard colours. Standard on the frame is silver.

Köksblandare med låg pip Garda är en blandarserie med strikt och avskalat formspråk. Den höjer totalupplevelsen av ett modernt kök och bygger på våra unika tekniska fördelar i form av bland annat mjukstängning och keramisk tätning.

FlipFlop (WIS-design, 2010), can be used as a decorative hook rack and as a display rack for magazines, brochures or pictures. Use just one in its own, or place several side by side to form a long, decorative border on the wall. It’s simplicity itself to

Lättlagda cirklar med trumlad marksten En cirkel av marksten i trädgården blir en vacker form som följer naturens egna struktur. Den runda formen förstärket intrycket av flera rum i trädgården. Skapa helhet med marksten och block Bygg gärna en låg mu

The Adesso armchair has a harmonic beautiful design with an even horizon, i.e. all sides are the same height. It is easy to get into and out of thanks to a horizontal support at a lower level than the crossbar. Adesso has a strong wood feeling and details that bear witness to the care put into the craftsmanship. Adesso has a beautiful form with open space between the crossbar and legs. The seat cushions have a special filling with soft seat core and a firmer front edge. This provides maximum seating comfort while making it easy to get up from armchair. Notches at the bottom front edge of the seat cushion keep it stably in the correct position. The upholstery can be easily removed and washed. The armchair has removable upholstery. Domestic or rubberised weave. Machine washable at 60°. The Adesso series also includes 2 and 3-seat sofas, a coffee and side table and a desk. Supplied ready assembled.Design: Marit Stigsdotter.

Aluminium und Holz – mit connect verbindet air-lux zwei hochwertige Rohstoffe aus der Natur. Edles Holz im Innenbereich ermöglicht neue individuelle Gestaltungs-Möglichkeiten und schafft ein warmes Ambiente; dauerhaftes Aluminium im Aussenbereich ist unterhaltsfrei und wertbeständig. Diese spannende Materialfusion ist konstruktiv wie ästhetisch eine einzigartige Produktinnovation im grossflächigen Premium Schiebefenster-Fassadenbau. connect Holz bietet die gleichen technischen und bauphysikalischen Vorzüge wie das air-lux Alu. Mit 16 exklusiven, hochwertig verarbeiteten Holzqualitäten, die bei üblichen Massivholzfenstern nicht zur Anwendung kommen, steht connect für Wertigkeit und ein einzigartiges, stilvolles Wohnambiente. Zusätzliche Individualität garantiert connect mit optional wählbarer Optik und Haptik in edelster Form.

Aluminium und Holz – mit connect verbindet air-lux zwei hochwertige Rohstoffe aus der Natur. Edles Holz im Innenbereich ermöglicht neue individuelle Gestaltungs-Möglichkeiten und schafft ein warmes Ambiente; dauerhaftes Aluminium im Aussenbereich ist unterhaltsfrei und wertbeständig. Diese spannende Materialfusion ist konstruktiv wie ästhetisch eine einzigartige Produktinnovation im grossflächigen Premium Schiebefenster-Fassadenbau. connect Holz bietet die gleichen technischen und bauphysikalischen Vorzüge wie das air-lux Alu. Mit 16 exklusiven, hochwertig verarbeiteten Holzqualitäten, die bei üblichen Massivholzfenstern nicht zur Anwendung kommen, steht connect für Wertigkeit und ein einzigartiges, stilvolles Wohnambiente. Zusätzliche Individualität garantiert connect mit optional wählbarer Optik und Haptik in edelster Form.

Burglary and fire certified security doors for homes and offices • Certified burglary and fire protection • Available with popular security keylocks • Colour and surface finishing options • For new and renovation buildings • Operation warranty 24 months Tested burgalry resistance against crowbars and similar mechanical tools. Grade 3 burglary resistance according to EN 1627. Fire protection for 45 minutes (EI 45). Soundproofing and isolation of external disturbing sounds for example from corridors and staircases (noise isolation 41 dB). Form and temperature insulation capacity maintained even during outside temperature variations. Federation of Finnish Financial Services has accepted KasoGuard security doors for structural burglary protection:

MTH Concertto facade sheets contain several embossed panels in the form of squares or rectangles. In a Concertto facade, there are few cut edges and no straight horizontal surfaces that could collect dirt. This compact entity is durable and extremely rapid to install. The Concertto metal facade combines beautiful appearance and freedom of design with cost-effectiveness, rapid installation, and a high-quality result. Hot-galvanised steel sheeting with a PVDF coating (protective film) or paint, with a material thickness of 1.00 mm. Aluminium with a PVDF coating, with a material thickness of 1.00 mm or 1.20 mm

MTH Concertto facade sheets contain several embossed panels in the form of squares or rectangles. In a Concertto facade, there are few cut edges and no straight horizontal surfaces that could collect dirt. This compact entity is durable and extremely rapid to install. The Concertto metal facade combines beautiful appearance and freedom of design with cost-effectiveness, rapid installation, and a high-quality result. Hot-galvanised steel sheeting with a PVDF coating (protective film) or paint, with a material thickness of 1.00 mm. Aluminium with a PVDF coating, with a material thickness of 1.00 mm or 1.20 mm

Available as Right handed: product code 6202, and Left handed: product code 6203. The basin’s direction is defi ned according to the tapered end. The basic principle of Gaius Original concept is the most efficient use of space and the independent use. Basin worktops, storage cabinet and support rails form a complete unit, in which mutual positioning and distances of parts have been carefully designed. Support rails colors and effi cient lighting of the space will increase safety in the bathroom. However the Gaius Original also facilitates the use of accessories (eg wheelchair, rollator) in the bathroom. The basins are also available with edge stripes facilitating visualization (red, yellow or grey).

Malmö a very elegant contract seating for the office and contemporary waiting-room seating for the home environment. Therefore, near the large sofas, are the slender tray-coffee tables, portions of coloured tops, which can be brought together like chromatic isles, the chaise longue with its sturdy and solid forms, discrete and classical armchairs, unusual pouffes, which when divided or put together create an elegant counterpoint of form and colour.

Built-in wind-resistant sunshading system. Outdoor roller blind designed for the fully recessed installation, thanks to the square form of the box and the guides that can be easily inspected. It is flexible: it can offer sun protection, blackout or protection from insects. It offers maximum wind resistance thanks to the ZIP system that prevents the leakage of the fabric from the guides. The freestanding system makes it installation easy, and also easy to repair.

In Nyx, modern construction techniques and simplicity in design combine to form long-lasting products easy to install and to maintain. The Nyx series consist of wall luminaires, lantern tops, and bollards which can also be used as a sign post. Made of ca

Montana's shelving modules can be used in infinite combinations. Combined with Montana's tables, chairs and other module systems, there is an ocean of decorating possibilities that can form the basis of your own personal space.

The slender outlines of H+M have become even slenderer; the visible height being reduced to two centimeters. The precise circular form is not changed, and it offers a well defined field of light where harmony meets efficiency. Use the curves of the H+M to

The slender outlines of H+M have become even slenderer; the visible height being reduced to two centimeters. The precise circular form is not changed, and it offers a well defined field of light where harmony meets efficiency. Use the curves of the H+M to

Cubo Architects have designed a new hall pendant as an alternative to the symmetrical pendant. Its three sides are alike but form a varying sculpture. The three slits let the light out and open up the illuminated inside of the luminaire. AVA is inspired

WC seat and cover Universal LAUFEN FORM, Duroplast, removable, automatic lowering system, matching floorstanding WC pan, order no. 82195.6, 82195.7, 82195.8, 82195.9, 82295.1, 82495.5, 82495.6, 82495.7, 82495.8, 82495.9, 82595.5, 82595.6, 82595.7 and, wallhung WC pan, order no. 82095.0, 82095.1, 82095.2, 82095.5 Order no. 89395.3

The TREND family of light fixtures responds to the modern development of communication technology and especially due to its appearance. A relatively simple form inspired by modern telecommunication devices is complemented by properties of full-bodied lighting that may be achieved by using sophisticated LED technologies or also classical luminaries, as the case may be. These light fixtures are either pendant or mounted providing a broad range of applications particularly in commercial areas, receptions, and meeting rooms. Type of installation: [LIST] Surface Suspended Wall mounted [/LIST]

Sickle-shaped concrete taller landscape edging can be used for outdoor works such as building a patio or tiled areas. Its interesting look makes it a great decoration for parks or elaborate gardens. It goes perfectly with rounded elements buildings. The product lines of sickle-shaped edgings, CORTO and GRANDE, form an incredible contrasting look next to any turf; it is greatly valued with various landscaping works.

The STUBI family features with 3 different sizes can form a very interesting lighting system. Very simple design, color and size variation, together with the LED source predetermined the features to design implementations in areas such as social or business representative. Type of installation: [LIST] Surface Suspended [/LIST]

Retro wall caps form yet another alternative for sheltering the top part of your wall. Water is drained by a drip ledge wall cap.

The family of PURI light fixtures represents a circular frameless built-in ceiling-mounted system. They are distinguised by a simple form, relatively simple application and the particularly perfect uniformity of the luminous area. Four different diameters are available to achieve the maximum clear effect of illuminated areas. With their simple design PURI light fixtures perfectly merge in interiors and this is why they are suitable for shopping centres, social and cultural amenities or representation areas. Type of installation: [LIST] Recessed [/LIST]

The stone wall caps Diton form an incredible decorative element. They will also protect the given area from the elements. They can be used as the end parts of garden fences and various types of wall. The wall caps also aesthetically compliment your concrete wall.

Retro cinder blocks are used for wall footings, posts and brickwork that form a part of landscaping architecture.

Concrete represents an exceptionally resistant material and any garden wall made of it will stand for years despite elements. Yet, it still requires elementary protection, such as concrete wall flat caps, which also form a wonderful decoration for your wall.

Sickle-shaped concrete taller landscape edging can be used for outdoor works such as building a patio or tiled areas. Its interesting look makes it a great decoration for parks or elaborate gardens. It goes perfectly with rounded elements buildings. The product lines of sickle-shaped edgings, CORTO and GRANDE, form an incredible contrasting look next to any turf; it is greatly valued with various landscaping works.

Press, design PetterssonRudberg (2015), is the result of an undertaking to construct a folding table made entirely out of wood. The challenge was to make a table that was lighter yet just as stable to use, just as simple to fold up and just as long-lasting as similar constructions. The tabletop is veneered with oak, birch, ash or finished in one of our standard stains on ash, black desktop and white or grey laminate. The table is supplied with a wooden edge strip or for a more durable tabletop, choose a plastic edge strip in white, grey or black. The solid wood legs are in oak, birch, ash or finished in one of our standard stains on ash and have felt floor protectors as standard. Optional extras are available in the form of castors, link fittings for connecting several tables, and a panel of sound-absorbent material that can be fitted to the underside of the tabletop. Also available is a storage trolley with locking wheels and a metal handle that can be placed either on the side or the short end. Press can be used either as a folding table that can be simply erected to provide a sturdy working surface, or as a more permanent wooden table that is easy to fold up and store out of the way when necessary. Press is an ideal solution in lecture halls, meeting rooms, lunch rooms, all types of conference facilities, schools, hotels, churches, etc.

Collar, design Louise Hederström (2011), is a new angle on magazine and brochure storage. The more sections that are displayed, the more the asymmetric form is emphasised. The “cut-away” concept is ideal for displaying books, magazines and brochures in different shapes and sizes. The design, inspired by a sheet of folded paper, has a distinctly graphical expression. Collar comes in sizes of 1029x355 mm (vertical with three separate sections) and 316x1128 mm (horizontal with five adjustable dividers that can be used to create up to four separate sections). Both models project 107 mm from the wall, where the panel hangs on a metal suspension strip. Collar is available in oak, birch, ash, standard colors and standard stains.

Part numbers: M14A-UL, M14ACS-UL & M14AB-UL The dualflow© Plus M14 is a fast, energy efficient, ecologic, hygienic & stylish hand dryer. It uses a high speed Class A universal motor to create an air stream of 233 mph that will dry your hands in ten seconds only. It’s elegant, easy maintenance designed and friendly-use. It’s very respectful with the environment thanks to its low power consumption (350 W in the ECO mode). The dualflow©plus is much more hygienic than alternatives owing to its 3-layer HEPA filter H13 and the Biocote© technology. The HEPA filter captures more than 99% of allergens in the air by filtering the air through a 30 mm thick 3 coat filter. The filter blocks at least 99.95% of particles than are 0.3 micron in size. The inclusion of the Biocote© technology inhibits the growth of the microrganisms odour causing and staining, keeping the unit clean and hygienic at all times. The dualflow©plus M14 provides a premium experience in every aspect. Very fast in drying terms (10-15 seconds), very quiet (only 62 dBA on the ECO setting) and respectful with the environment. It can be considered a truly money saver hand dryer owing its unique features that allows it to achieve savings of more than 57% compared to other “hands-in” dryers on the market. The dualflow©plus M14 is certified form third party by the North American Laboratory Underwriters Laboratories (UL) according with the USA Safety standard UL 499 and with the Canadian Standard CSA C22.2.

LUXURIOUS INDOOR SOFA Iron. Leather. Glass. The Monaco lounge series combines these natural materials into an exclusive indoor range with a elegant architectural form. We now extend the Monaco range with two elegant sofas, the series now consist of two sofas, the iconic chair and three glass topped tables. The Monaco Lounge Sofa manages to combine comfort on a large scale without being to bulky. Designed for both in the home and public environments, slim lines in a large format is the Monaco Lounge Sofa, elegant yet evident in it’s form. The iron frames are coated and come in three varied colours. Available in four different luxurious leathers and in two different fabrics. Material Selection As with all our furniture we always carefully selected only the very finest materials. Our leather comes exclusively from the Swedsih company ELMO whose animals all come from within Scandinavia. Each skin celebrates it’s natural heritage with insect bites and visible scars. We have chosen to use two-ply leather which is glued offering its beautiful surface on both sides. The cushions are then stuffed with down to achieve the highest level of luxury, comfort and durability. Designers Mats Broberg & Johan Ridderstråle has won several awards such as the Wallpaper Design Award, the Elle Decoration Design Award, Good Design Award and Residences Net Designers.

LUXURIOUS INDOOR SOFA Iron. Leather. Glass. The Monaco lounge series combines these natural materials into an exclusive indoor range with a elegant architectural form. We now extend the Monaco range with two elegant sofas, the series now consist of two sofas, the iconic chair and three glass topped tables. The Monaco Lounge Sofa manages to combine comfort on a large scale without being to bulky. Designed for both in the home and public environments, slim lines in a large format is the Monaco Lounge Sofa, elegant yet evident in it’s form. The iron frames are coated and come in three varied colours. Available in four different luxurious leathers and in two different fabrics. Material Selection As with all our furniture we always carefully selected only the very finest materials. Our leather comes exclusively from the Swedsih company ELMO whose animals all come from within Scandinavia. Each skin celebrates it’s natural heritage with insect bites and visible scars. We have chosen to use two-ply leather which is glued offering its beautiful surface on both sides. The cushions are then stuffed with down to achieve the highest level of luxury, comfort and durability. Designers Mats Broberg & Johan Ridderstråle has won several awards such as the Wallpaper Design Award, the Elle Decoration Design Award, Good Design Award and Residences Net Designers.

LUXURIOUS INDOOR ARMCHAIR Iron. Leather. Glass. The Monaco lounge series combines these natural materials into an exclusive indoor range with a elegant architectural form. The first products to be released in the Monaco Lounge Series consist of a chair and three glass topped tables. Arm chair The Monaco Lounge chair manages to combine comfort on a large scale without being to bulky. Designed for both in the home and public environments, slim lines in a large format is the Monaco Lounge chair, elegant yet evident in it’s form. The iron frames are coated and come in three varied colours. Available in four different luxurious leathers and in two different fabrics. Material Selection As with all our furniture we always carefully selected only the very finest materials. Our leather comes exclusively from the Swedsih company ELMO whose animals all come from within Scandinavia. Each skin celebrates it’s natural heritage with insect bites and visible scars. We have chosen to use two-ply leather which is glued offering its beautiful surface on both sides. The cushions are then stuffed with down to achieve the highest level of luxury, comfort and durability. Designers Mats Broberg & Johan Ridderstråle has won several awards such as the Wallpaper Design Award, the Elle Decoration Design Award, Good Design Award and Residences Net Designers.