3D parametric, 2D scale dependent, Ragnars Work Layout desk group, with\n- towers\n- cabinets\n- screen

3D parametric, 2D scale dependent, Ragnars Basic Layout desk group, with\n- towers\n- cabinets

2D parametric, people walking group

2D side view contour of a family with optional planar 3D.

2D front view contour of a couple with optional planar 3D.

2D side view contour of a group of people with optional planar 3D.

3D parametric, 2D scale dependent, Helland Bo seating group, with\n- chair types\n- headrest3D parametric, 2D scale dependent, Helland Bo seating group, with\n- chair types\n- headrest

3D parametric, 2D scale dependent, Helland Duun seating group, with\n- chair, 2-seater or 3-seater\n- open side, veneered side or fully upholstered\n- optional headrest\n- over covered upholstered arm3D parametric, 2D scale dependent, Helland Duun seating group, with\n- chair, 2-seater or 3-seater\n- open side, veneered side or fully upholstered\n- optional headrest\n- over covered upholstered arm

3D parametric, 2D scale dependent, Helland Citus seating group, with\n- chair types\n- side cushion3D parametric, 2D scale dependent, Helland Citus seating group, with\n- chair types\n- side cushion

3D parametric, 2D scale dependent, Helland Gent seating group, with\n- chair types\n- armrests\n- leg types3D parametric, 2D scale dependent, Helland Gent seating group, with\n- chair types\n- armrests\n- leg types

3D parametric, 2D scale dependent, Helland Link seating group3D parametric, 2D scale dependent, Helland Link seating group

3D parametric, 2D scale sensitive, Helland Modul seating group, with\n- seating types including inside and outside curvature\n- left and right armrest\n- armrest types\n- leg types3D parametric, 2D scale sensitive, Helland Modul seating group, with\n- seating types including inside and outside curvature\n- left and right armrest\n- armrest types\n- leg types

3D parametric, 2D scale dependent, Helland Budget seating group, with\n- chair types\n- headrest\n- over covered upholstered arm3D parametric, 2D scale dependent, Helland Budget seating group, with\n- chair types\n- headrest\n- over covered upholstered arm

people group

2D side view contour of a family with optional planar 3D.

2D front view contour of a couple with optional planar 3D.

2D side view contour of a group of people with optional planar 3D.

Baffle Ceilings create unique room atmospheres. These open ceiling constructions impress both with outstanding acoustics and the impressive possibilities of room layout. The free space between the baffles is optimally suitable for the integration of luminaires, sprinkler, ventilation systems or similar. Baffle Ceilings are also suitable for belated installations to correct acoustical problems with concrete ceilings and to create a distinctive design.

These well-directed ceiling constructions with Post Cap profiles can be adapted to every building shape and offer versatile scope for design. All avenues of ceiling design are open thanks to freely selectable distances of Post Cap profiles and our range of diverse ceilings with Post Caps and Cross Noggins. A special visual variant are radially installed Post Caps combined with trapezoidal metal ceiling panels. Post Cap ceilings allow you to install partition walls to the Post Cap profiles. Thus, you can flexibly change your room layout.

The NORTEC raised floor system offers impressive in-built properties and truly state-of-the-art technology. It is the ideal product for almost any field of application. NORTEC floor panels give superb underfoot comfort. They are manufactured from calcium sulphate (gypsum): a non-combustible material with superlative structural and physical properties. This product also offers outstanding levels of soundproofing. As a manufacturer, we can determine the choice of raw materials used. The Institute of Building Biology in Rosenheim recommends NORTEC as a biologically-neutral building material. Our gypsum panels are virtually emission-free.

- Demonstration object and product for requirement objects, not to be used in any project. Thank you for the understanding. The BIMobject® Team

- Demonstration object and product for requirement objects, not to be used in any project. Thank you for the understanding. The BIMobject® Team

- Demonstration object and product for requirement objects, not to be used in any project. Thank you for the understanding. The BIMobject® Team

- Demonstration object and product for requirement objects, not to be used in any project. Thank you for the understanding. The BIMobject® Team

It is not often a jewel of a chair is launched. Copenhagen is just that chair. The chair is defiant, but at the same time is soft and harmonic. It can stand alone as a sculpture or several placed in a group. Copenhagen recommended with stretchable fabric like Divina, Fame and Vadal. Weight/Assembling: 10 kilo per chair. Delivered assembled. 1 chair per carton.

Burell is a light sofa group with a stylish design. Available as a 2 or 3-seater sofa, chair with or without armrests, or bench. Standard: Available in laminated beech. Steel: Chrome. Info: Upholstery: moulded cold-cured polyurethane foam. Assembly: Legs require assembly. Each item sent separately. Measures: Chair: W55/65, 2-seater W110/120, 3-seater W165/175. Bench 2/3-seater W110/165, D63, SH44, H77cm.

The Planet chair and table was first launched in 1965 and remained a part of the collection until the end of the 1970s. Planet was the first spherical chair in Norwegian furniture history. The name alludes to the first space journey in 1961 and the entry of Pop Art furniture onto the Norwegian market. Delivered with plastic gliders. Planet may be turned 360 degrees, and is available with a soft tilt- forwards/backwards. We recommend choosing an elastic material such as Divina, Fame, Vadal and Cicero. There is an additional charge if you choose more than one fabric/colour per chair. The model is delivered with removable seat cover. The highest textile group form the basis for pricing.Planet is available in white contrast seam (NCS S 0500-N), light grey (NSC S 2502-R), grey (NCS S 5502-B) and black (NSC S 9000-N)

Solid wood, with a history going back more than 100 years, tradition, Swedish craftsmanship, timeless, aware and responsible. When Space Copenhagen created My Chair for Stolab the starting point was a profound feel for materials and details. Honest, aware, playful and poetic are other words you would use to describe the background thinking behind My Chair. The result is a beautifully formed and graceful chair that leaves no onlooker unmoved. Fits in just as well on its own or in a group with several chairs around a dining table or in a meeting room.

Oxford is a genuine piece of wooden furniture where the designer wants to present the structure itself through sophisticated and clear details. Oxford has a marked perspective that also makes it exciting to look at. But perhaps it’s just its sitting comfort that will make you fall in love with it. The cushioned, upholstered seats are available in any of our standard fabrics or in any material that you send us. The material is removable on both the seat and back cushions. Supreme sitting comfort is achieved by the classic basic construction combined with comfortable seat and back cushions fi lled with down. The seat cushion also has a core of highly elastic cold foam to further increase the comfort. Oxford is beautiful to look at from all directions, which makes it perfect for creating a group of seats in the middle of a room. Design: Mattias Ljunggren.

Miss Holly was produced with respect for the past and a feel for what is lacking today. Jonas has gained inspiration from Windsor chairs from all over the wold and has created his very own version with a two-dimensional feel. Gracious and generous at the same time. A chair that is equally attractive and functional, and whose many details testify to the designer's professional skill and love for wood as a material. Miss Holly is a equally attractive alone or in a group. Its seating height is suitable for most dining tables. Miss Holly offers many details that testify to the designer’s high professional skill. The top-piece is made of a piece of solid wood which was compressed to make it pliable. Soft tactile forms. Generous and gracious at the same time. Thanks to its clear profile, Miss Holly works equally well as a standalone item or in a group. Its seating height suits most dining tables. Available in natural lacquer, oil or stain. Design: Jonas Lindvall.

B25 is an easy chair in compression-moulded birch with a surface of ash veneer. The seat is upholstered in polyether foam and down. B25 is the perfect solution in, for example, lounges, libraries and hotels, where the chair offers a secluded place in which to relax. Blå Station is 25 years young in 2011, and Cate & Nelson were commissioned to design a product to commemorate the occasion – B25. Their brief was to base this product on the language of design that characterised Blå Station in its earliest days – the round birch-wood ring and natural tanned leather from Tärnsjö Tannery. The result, B25, also builds on the idea of furnishings as members of a family – creating not just a single item of furniture, but a small series, a group of furnishings or a family based on the same idea and using the same basic components. Design: Börge Lindau.

Float High Large is a development from Float High. Higher back and sides creating a secluded sphere where you can sit on your own or in a group. Eero Koivisto uses an architectural approach to create low-key furniture with a strong sense of presence - som

In 1955 Yngve Ekström (known for such designs as the Lamino armchair) designed a low stick-back chair for Stolab that was given the name Arka. We have brought the chair back to life and are proud to present it fully intact in its stately and unique form. Just as beautiful and more right than ever. The Arka lounge chair has a distinct design based on three different circles. With its unique design, Arka fits in just as well standing alone as it does in a group of several chairs. With the sheepskin cushion (available as an option), Arka becomes a really comfortable place to sit for long or short periods of time. Sheepskin cushion as option. Supplied ready assembled. Available in natural lacquer, oil or stain. Design: Yngve Ekström.

As the name suggests, Solo is an armchair which shows itself off to advantage in all settings - as a standalone chair or as an independent unit in a larger group. Solo is good value, combining comfort with modern design. The chair comes in four variants –

Float High Large is a development from Float High. Higher back and sides creating a secluded sphere where you can sit on your own or in a group. Eero Koivisto uses an architectural approach to create low-key furniture with a strong sense of presence - som

As the name suggests, Solo is an armchair which shows itself off to advantage in all settings - as a standalone chair or as an independent unit in a larger group. Solo is good value, combining comfort with modern design. The chair comes in four variants –

Oxford is a genuine piece of wooden furniture where the designer wants to present the structure itself through sophisticated and clear details. Oxford has a marked perspective that also makes it exciting to look at. But perhaps it’s just its sitting comfort that will make you fall in love with it. The cushioned, upholstered seats are available in any of our standard fabrics or in any material that you send us. The material is removable on both the seat and back cushions. Supreme sitting comfort is achieved by the classic basic construction combined with comfortable seat and back cushions fi lled with down. The seat cushion also has a core of highly elastic cold foam to further increase the comfort. Oxford is beautiful to look at from all directions, which makes it perfect for creating a group of seats in the middle of a room. Design: Mattias Ljunggren.

The permanent wall system is strong, simple and flexible. The wall rail is mounted vertically on the wall and have perforated holes all the way for easy height adjustment of the brackets and shelf ends. It is an easy and affordable shelving suitable for storage in the storage and archives. But with a little imagination and creative choices of material the wall rails also can be used where the appearance is high. The collection Wood can be combined as needed. Here with a group table and storage above. Choose wood and powder coated colors from our catalog.

A sideboard produced to complete the Vardags dining room group, but thanks to its stylish design Vardags can also be combined with other furniture. Vardags has many details that place high demands on furniture making craftsmanship. Solid door panels, drawer fronts and drawer sides further strengthen this impression of quality. The drawers are adjustable and self-closing, with anti trapping device. The shelves are moveable. All drawer fronts and drawer sides, door panels and shelves are made from solid birch. The doors are lockable. Design: Carl Malmsten.

Oxford is a genuine piece of wooden furniture where the designer wants to present the structure itself through sophisticated and clear details. Oxford has a marked perspective that also makes it exciting to look at. But perhaps it’s just its sitting comfort that will make you fall in love with it. The cushioned, upholstered seats are available in any of our standard fabrics or in any material that you send us. The material is removable on both the seat and back cushions. Supreme sitting comfort is achieved by the classic basic construction combined with comfortable seat and back cushions fi lled with down. The seat cushion also has a core of highly elastic cold foam to further increase the comfort. Oxford is beautiful to look at from all directions, which makes it perfect for creating a group of seats in the middle of a room. Design: Mattias Ljunggren.

Full body porcelain tile, stony style, three finishes, four colors and two diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. Complementary tactile slabs in six colors and two finishes. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body non-rectified tile, five matt colors available. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body rectified tile, bright white. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body rectified tile, three bright colors available. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, cement style, six colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body non-rectified tile, six matt colors available. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, cement style, two finishes, six colors and six diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, cement style, four colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, aged wood style, five colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, cement style, three finishes, six colors and seven diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, marble style, fourteen colors and two diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, slate style, three colors and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain non-rectified tile, five colors and antislip finish for exterior and heavy traffic applications. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, cement style, three colors and two diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

White body rectified tile, bright white. Water absorption E>10%, BIII group, according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain tile, cement style, two finishes, four colors and six diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Porcelain non-rectified tile, three colors and antislip finish for exterior and heavy traffic applications. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile in 3,5 and 5,6 mm thick. The largest slab is 1000x3000 mm, twenty seven colors, two finishes and four diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, cement style, three finishes, six colors and seven diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

Full body porcelain tile, stony style, three finishes, five colors and eight diferent sizes available. Water absorption E<0,5 %, BIa group according to UNE-EN 14411. Step tiles, skirting and special pieces available. H&C Tiles photo-catalytic coating with air purifying, self-cleaning, and antibacterial properties available.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

The inspiration for Lop magazine holder comes from the humble paper clip. The idea is to make the holder itself more or less invisible. Lop, design kaschkasch (2015), is made of white metal and screws directly to the wall and deliver in a packs of 2. Use Lop on its own or group several together to store and display magazines or books.

A 3D form to represent a gabion wall. A rectangular cage encloses a stack of randomized rocks. Care has been taken to reduce the number of edges and polygons, so the center is hollow and the rocks are angular. However if you apply a textured surface, the effect is not too bad.

A parametric hand basin 'vanity' unit. Choose from three basic geometries, then add doors and drawers. Choose basin, door panel and handle styles, and set dimensions. The basin can sit on or under the counter, or flush to the counter surface. Note that the model does not include tapware (faucets). These must be placed independently.

Choose a straight, L-shaped or U-shaped path for the rail. At the corners, the rail bends smoothly around a parametric radius to allow the curtains to slide smoothly. The curtains themselves may be opened or closed. For visualization, the bottom edge of the curtain fabric waves slightly in 3D. In section or elevation view the curtain fabric falls vertically. Adjust the path graphically using dynamic hotspots.

An engineer's bolt for 3D detailing. Define the bolt size with control over all relevant dimensions. Include nuts and washers. In plan view the bolt may be displayed in various modes. Rotate the bolt in 3D. When used as a Solid Element Operator, the bolt will cut an oversized hole and will allow space around the head and nut.

A professional basketball hoop. Set materials, pens, etc. and adjust some dimensions.

Imac for interior visualization. Choose display size and keyboard type. Move the keyboard and mouse graphically.

Ceiling fan with four blades.

A parametric steel chain for 3D detailing. Adjust the horizontal run and vertical rise and the link dimensions. Set a 'sag' dimension to allow the chain to follow a natural path. Use a checkbox in the Settings dialog to force the chain to use a whole number of links. This will add a link if the chain is too short to follow the specified path, and the 'sag' will increase. In 3D (i.e. not sections or elevations) you can specify a 'twist' angle - both incremental and random - to apply between adjacent links. This can make for a more realistic rendering.

Change surfaces and view attributes. The car can be rotated to fit the contour of the site.

A countersunk wood screw for 3D detailing. Set the dimensions and choose the head type.

An attic ladder.

Ceiling fan with four blades.

A shower unit including (optional) curved back wall, glass panels and doors. The shower shape may be either rectangular, corner, or curved corner.

A fire box with optional flue and cowl. If a flue is shown, it may be bent to penetrate a wall. An image in 3D can depict flames and a glow is emitted in photorendered views. The object is self-labelling in plan view.

A fire box with optional flue and cowl. If a flue is shown, it may be bent to penetrate a wall. An image in 3D can depict flames and a glow is emitted in photorendered views. The object is self-labelling in plan view.

A gas cylinder on a concrete pad. Options include pad shape and dimensions, and whether one or two gas bottles will be placed. Minimum clearance may be displayed in plan view and as a conical form in 3D.

A parametric wall mounted WC inspired by the Villeroy & Boch Subway range.Set the overall width, depth and height of the toilet.Choose materials for the toilet and seat. Set the resolution of the model and 2D symbol. The object is self-labelling in plan view and can display minimal space requirements.

A boat and/or trailer. The boat is an outboard motor type inspired by the Haines Hunter range. Set basic dimensions of the boat and trailer, surfaces and pens.

A rebar cross brace.

A tek screw for 3D detailing. Set the dimensions and choose the washer type.

Alfa Romeo Brera 3.2 JTS V6 2008. Change surfaces and view attributes. The car can be rotated to fit the contour of the site.

A standard netball post and net. Most of the dimensions are fixed by the rules of netball.

A model of an interior ceiling mounted air diffuser for use in heating and cooling solutions. Parametric object set grille type, surfaces ect. Object is self labeling in plan view.

Oval monolithic basin with drain. If used as a Solid Element Operator will cut an appropriate hole.

A parametric free-standing bath inspired by the Victoria and Albert 'Toulouse' collection. Set the overall width, depth and height of the bath, and the material thickness. Dynamic hotspots can be used to control the shape. The 3D model can be displayed at three resolutions (detailed, regular or simple). Choose materials for the bath and drain. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. In plan view, the object is self-labelling.

A generic caravan for visualization.

A holly wreath for the festive season with adjustable dimensions and materials.

Change surfaces and view attributes. The car can be rotated to fit the contour of the site.

A Gib Handibrac® panel hold-down bracket. The dimensions of the bracket and fixings are locked to the real-life dimensions of this product. Choose whether to show the bolt and screw threads or just the heads.

A parametric 2-door domestic refrigerator with freezer drawer under. Settings control the basic dimensions.Set the overall width, depth and height, freezer height, door width, handle length, and the position and size of the ice water dispenser.Choose materials for the appliance, handle and controls. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A coach screw for 3D detailing. Set the dimensions and choose the washer type.

A parametric, hand-held umbrella for visualization. Adjust the dimensions of the umbrella, the number of spokes, its Materials and Pens. Graphically control the tilt angle, and raise or lower the umbrella. The umbrella may be placed either upright or inverted. And each placed instance has a random slight tilt angle, which looks great in mass grouping.

A round exterior water tank with 8 preset sizes. The object is self-labeling in plan view.

A parametric 2-burner gas cooktop. Set the overall width, depth and height of the cooktop. Adjust the burner dimensions and the position of the knobs. Choose materials for the cooktop, burners and knobs. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A marker to indicate theoretical sunrise and sunset angles for winter and summer. The angles are calculated based on the latitude as set in the Project Preferences. Place it as a border around any North pointer to form a complete symbol.

A flue for visualization. The flue may be bent to penetrate a wall.

A laundry tub inspired by the RobinHood supertub range. The tub includes a simple cabinet. Tapware must be added as separate objects.

A low polygon automobile based on a medium sized truck. Can be set to two different models flat bed truck, and box truck. The simple model in intended to provide context without detracting from the Architectural features of a rendering. The entire model consists of under 400 polygons.

A basic top-loading washing machine for interior visualization. Choose from two control lay-outs and set the dimensions.

Smoke detector inspired by the Apollo product range. Dovetails seamlessly with the Cadimage Electrical tool. Can be rotated for either wall or ceiling mounting.

childrens playground barrel bridge.

A cargo net for use as childrens playground equipment.

A centreline marker.

A simple front-loading dryer for interior visualization. To hang the dryer on the wall, inverted it so that the control panel is at the bottom.

An external hot water system. Adjust the overall dimensions, surfaces, etc. The object is self-labeling in plan view.

A continuous flow hot water system inspired by the Rinnai Infinity product range. Set basic dimensions, surfaces etc. The object is self-labeling in plan view.

A fold-down ironing board in a dedicated cabinet. Dynamic hotspots are provided to open the cabine door, pull the ironing board down and rotate it into position.

A low-polygon automobile based on the Mitsubishi Lancer Evolution 9. The simple model is intended to provide context without detracting from the Architectural features of a rendering. The entire model consists of under 500 polygons.

A mobility parking symbol. The 3D model may be given a thickness, to allow use as an operator in solid element operations.

An annular groove nail to model Mitek fixings for Lumberlok joist hangers.

A parametric standard 1-door oven and ceramic cooktop with heating drawer below. Set the overall width, depth and height of the oven, and the dimensions of the heating drawer and control panel. Choose materials for the appliance and its controls. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric range hood. Set the overall width, depth and height of the hood, and the dimensions of the flue. The flue position may be adjusted forward from the back of the range hood to change between wall-mounted and island style hoods. Choose materials for the appliance and its controls. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric 2-door domestic refrigerator with 2 freezer drawers below. Settings provide control over the basic dimensions.Set the refrigerator width, depth and height, and the freezer heights. Adjust the handle lengths.Choose materials for the appliance and handle. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A scale bar to facilitate taking scaled measurements from printed drawings.

A rectangular skylight. The panel may be fixed or opening. If placed as a skylight (i.e. using the Skylight tool from ArchiCAD's toolbox) this object will cut a hole in the roof and align to the roof surface.

A solatube skylight with parametric control for tube path and dimensions.

A parametric bench-mounted single-lever pull-down kitchen tap. Set the dimensions of the tap, and graphically adjust the spout angle. Choose a material for the kitchen tap. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A toilet roll holder inspired by the Miles Nelson range. Set the overall size, the individual component diameters including the wall mount, different lengths of the holder as well as radius and width of the rail. Adjust the materials of the holder, the toilet paper and the roll. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

Heated towel rail with adjustable rung positions.

Ceiling fan with three blades.

Platfrom roof, designed for use in childrens playgrounds.

A faceted rock that randomizes its shape on placement if required. Placed rocks can be re-shaped at the press of a button.

A swing, designed for use in a childrens playground.

A basic 3D tree roughly resembling a birch. Being deciduous, the number and colour of leaves depends on the season. The tree is modeled on a randomizing algorithm. You can create a new random tree by clicking a button in the Settings dialog. This process takes several seconds, but once complete the data is stored and no further calculations are required. Thus 3D generation is relatively quick.

A candy cane for the Christmas tree.

A bell for the Christmas tree.

A star for the Christmas tree.

A star for the Christmas tree.

A parametric 3D Christmas Tree with balls. The tree size and stem height may be adjusted. Each branch is placed using a randomization algorithm, so that by clicking a Randomize button variations of the tree may be produced. The balls are attached to the longer branches, size and material being randomly selected. However you can set the number of balls that should be placed. Shadow-casting for plan and 3D view is controlled via a single selection.

A bauble for the Christmas tree.

A parametric 4-pan electric cooktop. Set the overall width, depth and height of the cooktop, and the size and position of each heating coil. Set the position of the control knobs. Choose materials for the appliance, the heating coils knobs. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric 4-plate electric cooktop. Set the overall width, depth and height of the cooktop. Adjust the position and size of each hotplate, and the position of the knobs. Choose materials for the appliance, hotplates and knobs. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric 4-pan electric cooktop. Set the overall width, depth and height of the cooktop. Adjust the position and size of each heating element, and the positions of the knobs. Choose materials for the appliance, heating elements and knobs. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric single-door domestic dishwasher with settings to control the basic dimensions. Set the overall width, depth and height and the toekick height and depth. Choose materials for the appliance and its controls. Set the resolution of the model and the 2D symbol, pens & fills. The object is self-labelling and will display minimal space based on the Model View Option settings.

A single dish-drawer type dishwasher. Set the overall dimensions. Choose materials for the appliance and controls. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A gift box to place under the Christmas tree.

A Grab Rail with an upward bend. Set the overall size, the individual component diameters, the main rail curve radius, the distance from the wall and the materials.

A corner Grab Rail. Set the overall size, the individual component diameters, the main rail curve radius, the distance from the wall and the materials.

A straight Grab Rail. Set the overall size, the individual component diameters, the main rail curve radius, the distance from the wall and the materials. Adjust the angle of the grab rail.

A rectangular gully trap.

A parametric hot water cylinder. Adjust the dimensions, surfaces, etc. The object is self-labelling in plan view.

A parametric joist / truss hanger for 3D detailing. Designed to model Lumberlok JH47 x 120 or similar joist or truss hanger. Hotspots on the holes provide a target for placing 3D screws and nails. Use in conjunction with 3D fixings such as Nail #1607 and Screw #1596.

A parametric joist / truss hanger for 3D detailing. Designed to model Lumberlok JH47 x 190 or similar joist or truss hanger. Hotspots on the holes provide a target for placing 3D screws and nails. Use in conjunction with 3D fixings such as Nail #1607 and Screw #1596.

A parametric joist / truss hanger for 3D detailing. Designed to model Lumberlok JH47 x 90 or similar joist or truss hanger. Hotspots on the holes provide a target for placing 3D screws and nails. Use in conjunction with 3D fixings such as Nail #1607 and Screw #1596.

A parametric joist / truss hanger for 3D detailing. Designed to model Lumberlok JH70 x 180 or similar joist or truss hanger. Hotspots on the holes provide a target for placing 3D screws and nails. Use in conjunction with 3D fixings such as Nail #1607 and Screw #1596.

A parametric joist/truss hanger for 3D detailing. Designed to model Lumberlok JH95 x 165 or similar joist or truss hanger. Hotspots on the holes provide a target for placing 3D screws and nails. Use in conjunction with 3D fixings such as Nail #1607 and Screw #1596.

A parametric kitchen sink with two bowls and no drainer. Set the overall width, depth and height of the sink. Adjust the dimensions of the bowls, the offset of the second bowl, and the position and diameter of the drains. Choose a material for the kitchen sink. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric kitchen sink with two bowls and two drainers. Set the overall width, depth and height of the sink. Adjust the dimensions of the bowls and drainers, and the position and diameter of the drains. Adjust the drainer rib pattern. Choose a material for the kitchen sink. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A designer laundry tub inspired by the Robinhood supertub range.

A basic 3D tree roughly resembling a poplar. Being deciduous, the number and colour of leaves depends on the season. The tree is modeled on a randomizing algorithm. You can create a new random tree by clicking a button in the Settings dialog. This process takes several seconds, but once complete the data is stored and no further calculations are required. Thus 3D generation is relatively quick.

A single or multiple power line with optional insulators at either end. Set power line length, rise and droop. Can be used in conjunction with the Power Pole #1511 object.

A power/utilities pole including post, cross-members and optional transformers. For use in conjunction with the Power Line #1512 object which can be used to add wires and insulators.

A parametric curved-top range hood. Set the overall width and depth of the hood, and the thickness at edge and center. Adjust the dimensions and position of the flue to change between a wall-mounted or island type range hood. Choose materials for the appliance, and its controls. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric curved glass range hood with settings to control the basic dimensions. Set the overall width, depth and height of the hood, and the size and position of the flue. Choose materials for the range hood, the glass, and its controls. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

NZS E2 Risk Analysis table.

A standard New Zealand direction street sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions, choose direction (turn left, turn right, turn left or right, or proceed straight ahead) and choose from 4 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

A standard New Zealand give-way sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

A standard New Zealand direction street sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions, choose direction (no left turn, no right turn, or no U-turn) and choose from 4 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

A standard New Zealand roundabout give-way sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views.

A standard New Zealand speed-limit street sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions, choose the speed limit (10km/h up to Open Road speed in steps of 10) and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

A standard New Zealand stop street sign for visualization. An image is pasted onto a back board, with an option to mount on a post. Set dimensions, and choose from 3 standard sign sizes. Note that the image appears only in Open GL and photorendered views. Also note that at the time of upload, a bug fixed in ArchiCAD 18 may prevent effective use in previous versions.

A traditional street sign with optional arrow at either end. Set the street name, font and dimensions.

An LED street light with either one or two lamps on curved arms. Set the post and arm dimensions, and move the arms up and down on the post. NOTE - this is not a light source, just a 3D model.

A flush mount switch board for visualization, inspired by the Clipsal/PDL DBF series.

A parametric, bench-mounted, single-lever, automatic basin tap. Set the dimensions of the tap, and graphically adjust the spout and lever angles. Choose a material for the basin tap. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

A parametric bench-mounted kitchen tap with separate handles. Set the dimensions of the spout and handles, and the position of the handles relative to the spout. Graphically adjust the spout angle. Choose a material for the kitchen tap. Set the resolution of the model and the 2D symbol. Set pens and fills for the 2D symbol. The object is self-labelling in plan view.

Tinsel for the Christmas tree.

A New Zealand style traffic light. Select a setout (including left or right turning arrows), set the dimensions and choose surface colours. For each column of lights, choose which of the three is currently on (i.e. red, amber or green). An optional post is included. NOTE - this is not a light source.

A plastic 120L Wheelie Bin, designed for road side pick up by rubbish trucks.

A plastic 240L Wheelie Bin, designed for road side pick up by rubbish trucks.

A basic 3D tree that remotely resembles a weeping willow. Being deciduous, the number and colour of leaves depends on the season. The tree is modeled on a randomizing algorithm. You can create a new random tree by clicking a button in the Settings dialog. This process takes several seconds, but once complete the data is stored and no further calculations are required. Thus 3D generation is relatively quick. However be warned, the model has an extremely high polygon count.

Recreational climbing wall for childrens playground.

Firemans pole, designed for use on childrens playground.

Model of a simple garden gazebo. This model has a number of different shape in addition to adjustable parameters and surfaces.

A horizontal bar, designed to use on childrens playground.

Monkey bars, designed for use in childrens playground.

Timber elevated platform for use in a childrens adventure playground.

Offset block retaining wall for site visualization. Can be straight or curved.

Timber retaining wall for site visualization.

A smooth river boulder that randomizes its shape on placement if required. Placed rocks can be re-shaped at the press of a button.

Safety rail, designed for use on childrens playground.

Slide, designed for use in childrens playgound.

A simple timber beam, designed for use as a component of a childrens playground.

Vertical grab rails, designed for use in childrens play ground.

Timber planks laid over cables to form a wobbly bridge for use in an adventure playground.